Owner's Manual

2/9
3
If needed, remove body panels for mirror and camera installation.
For example, the a-pillar may require removal as shown above.
2
Remove the factory mirror from the windscreen.
Most mirrors are removed by loosening the T20 Torx screw on the
mirror base and sliding mirror upward towards the headliner.
*Mirror removal process may vary by vehicle.
-
+
1
Turn car o. Remove the negative battery cable and safely tuck
cable out of the way.
4
Mount the Full Display Mirror on the windshield by sliding the
mirror mount over the button. Tighten the T20 Torx set screw to
13.3 - 17.7 in-lbs.
*Specic vehicle adaptors may be needed.