Owner's Manual

7/9
23
Double check the mounting location is correct. Remove two-way
tape liner. Ensure debris or hand oils do not get on two-way tape.
21
Do NOT take o two-way tape. With vehicle ignition on and mirror
in display mode point the camera. Choose location that image
looks best in mirror’s display.
Tips!
Ensure camera image is level.
Ensure camera can point at horizon.
22
Using masking tape, mark the location at which you would like to
mount the camera.
24
Caution!
Adhesive is dicult to remove. If done incorrectly, a new bracket
and adhesive is recommended.
In mounting location, place window bracket onto rear glass. Press,
hold, and apply even pressure across the entire surface. Press
and hold for 1 minute. Install temp should be above 50 degrees
fahrenheit.
1 Minute