GSM810 GSM 900 system User’s Manual
Disclaimer Audiovox Communications Corp. makes no representations or warranties, either expressed or implied, with respect to the contents hereof and specifically disclaims any warranties, merchantability or fitness for any particular purpose. Further, Audiovox Communications Corp. reserves the right to revise this publication and to make changes from time to time in the contents hereof without obligation of Audiovox Communications Corp. to notify any person of such revision or changes.
with special care. If you lose it, please contact your dealer or service provider as soon as possible. Turn the phone over and locate the SIM card socket of the handset. Follow the steps below to install the SIM card. The metal contact of the SIM card can be easily damaged by scratches. Pay special attention to the SIM card when you handle and install it. Insert the bevelled end of the SIM card into the SIM card socket. Make sure the metal contact faces down when you insert it.
Place the top end of the battery on the handset. Hold down the bottom side of the battery. You will hear a click when the battery is secured. # Charge the battery. Insert the travel charger connector into the battery charging socket at the bottom of the handset. Make sure the flash mark on the connector faces upward when you insert it. It takes about 130 minutes for the travel charger to fully charge the new battery. On the LCD display, the battery strength bars will flash till the battery is full.
What is PIN? PIN (Personal Identification Number) is a password provided by your network service provider. With this PIN, you can use the SIM card and access the services from the network service provider. You can enter your PIN with the alphanumeric keys. If you have typed a wrong letter, please press key. When entering a wrong PIN more than three times, your phone will become locked. Please contact your dealer to solve this problem.
iv
1.1 TURN THE PHONE ON ....................................................................... 9 1.2 TURN THE PHONE OFF...................................................................... 9 1.3 MAKE A CALL.................................................................................. 9 1.4 END A CALL .................................................................................... 9 1.5 ANSWER A CALL ............................................................................ 10 1.
All (1-1-4-4).................................................................................18 Find Record (1-2) ................................................................................19 By Name (1-2-1) ..............................................................................19 Add Record (1-3) .................................................................................19 Delete Record (1-4) .............................................................................
If No Reply (3-1-3)...........................................................................28 If Unreachable (3-1-4) .....................................................................28 Cancel All (3-1-5).............................................................................28 Call Restrict (3-2).................................................................................29 Restrict All Out (3-2-1) .....................................................................
Manual Selection (5-2) .........................................................................36 3.6 SECURITY SETTINGS (6) ............................................................. 36 Set Code Status (6-1) ..........................................................................36 PIN code (6-1-1)..............................................................................36 Phone Code (6-1-2) .........................................................................36 Change Password (6-2) .......
CHAPTER 6. ACCESSORIES................................................................. 47 6.1 BATTERIES ................................................................................... 47 Battery Charger ...................................................................................47 10.2 HANDS-FREE .............................................................................. 51 Portable Hands-Free Kit........................................................................51 Simple Car Kit......
x
• Switch off your cellular phone before you board an aircraft. Dangerous Areas… Turn off your phone when you are near the following places: • Refueling station • Fuel depots • Chemical plants • Blasting operation area And These Electronic Devices… Your cellular phone may cause interference or malfunctioning of electronic equipment that is not adequately shielded from radio frequency energy. Beware of interference which usage of your phone may cause to the following devices: • Medical devices, e.g.
desktop PC to transmit data, fax and access the Internet. We know that you demand more than what a mobile phone can offer for mobility. The advanced EFR (Enhanced-Full-Rate) sound technology optimizes the sound quality of your phone calls, allowing you to clearly distinguish the speaker’s tone. If you are surprised at what you hear, you will be even more surprised at what you see – the electroluminescent LCD display frees you from the nightmare of groping between pixels.
*For a detailed description of the function of each key, please refer to page 6. Side View Volume adjustment Earphone jack key *Under standby mode, you can press the volume adjustment key to enter the Phone Book directly. *You can connect the optional hands-free kit to the earphone jack.
*The data transmission & car kit connector can be used to connect the data service cable and the optional hands-free kit.
The table below describes the meaning of each icon: Signal Strength Roaming The more bars displayed, the better the signal strength. When your phone is not used under your home network, this icon will appear. Short Message This icon will appear on the screen when a short message is received by the phone. When the message storage memory is full, this icon will flash. Speaking This icon appears when you speak on your phone. Line in use Displays the current line in use (Please refer to page 33).
Key Function Power On/Off Key Long press this key to turn the handset power on or off. To access the menu functions, you can use this key to return to a previous screen of the menu. Send Key Press this key to make your call or confirm menu selections. Selection Key This key is used to navigate and select among function items in the menu or submenu. For example, to access the Phone Book, you can press the key downward to enter the Phone Book item.
Key Characters , . : 1 % ! ? ; “ ‘ < > ( ) @ & A B C 2 Å Ä å ä à Ç æ ß D E F 3 è é É £ Æ $ G H I 4 ï î ¿ ) J K L 5 ∆ _ Φ Γ Λ Ω M N O 6 Ñ ñ ò Ö ö ∅ φ P Q R S 7 ¥ § T U V 8 ü Ü ù W X Y Z 9 Π Ψ Σ Θ Ξ 1) _ 0 + - * / = # For example, if you want to enter “Mary”: 1. Long press key until “M” displays on the screen. 2. Long press on the screen. key, then press key several times until “a” appears 3. Long press on the screen. key, then press key several times until “r” appears 4.
8
Long press key for a few seconds to turn the phone off. 1.3 Make a Call key for a few seconds to switch your phone on. ! Long press " # key. Enter your PIN and press After the PIN is accepted, your phone will automatically start searching the designated network. After successfully connecting to the network, the LCD display will show which network you have connected to and go into standby mode. In this standby mode, dial the phone number including the area code you $ % desire.
Press the buttons on the side of the phone to adjust the volume of the earpiece. Five levels of volume are available for your selection.
screen when sending out the call. For details, please refer to Phone Book on page 17. 2.2 Make an International Call ♦ Enter the outgoing national code, or press ♦ “ ” shows up on the display. Enter the national code, area code and phone number of the call. Make + your call by pressing the receiver’s area code. key for about 1 second until key. When dialing, please omit the first zero of 2.3 Make an Emergency Call Enter 112 (the international emergency number) and press key. The call will be made.
key to dial it. 2.7 Phone Book Shortcut Under standby mode, you can press the volume adjustment keys to enter the phone book and browse the entries. You can press key to select and press key to dial. 2.8 Add New Entries Under standby mode, you can add new entries to the phone book by first entering the number and long pressing key. You will then be prompted to enter the name, number and record number (i.e., the location of that entry). When finished, press key. 2.
After you key in the telephone number, long press key for a second, then ”P” will display on the LCD screen. Enter the extension number and press key to make the call. 2.12 Call Options When you are on a telephone call, you can press key to enter the options key to select. The options are listed as follows: and press The options marked “*” are only available if you have subscribed to your network service provider. Mute call When no sound wants to be heard by your interlocutor when you are on a call.
* Messages You can read or write messages under this function. Please refer to page 21 for details. 2.13 Key Lock You can long press key to initiate the key lock function to prevent turning on or off your phone unintentionally. When the key lock function is initiated, the icon will appear on the screen. To unlock, press key and then press 14 key.
♦ Press key to return to standby mode. For example, when you want to change the language setting: key downward 4 times to enter item 4: “Handset Settings”, then Press press key to confirm. ♦ Press key downward 4 times to enter item 4-5 “Language” and press key to confirm. ♦ Select a desired language item with confirm. ♦ Press key, then press key to key or volume adjustment keys to return to standby mode.
♦ Select the desired language item with confirm. ♦ Press key and press key to key to return to standby mode. You will see the function codes listed after each function item in the following sections. Type the function code to enter the function through shortcut access.
You can find the record for the latest calls you made in various situations. Last Dialed (1-1-1) Displays the last 10 calls you dialed. After you press key to enter this item, you can press key to browse the number you dialed. Select a number and press key to key to choose to dial that number (Send), save enter, then press that number to Phone Book (Save) or see the details of that call (Details). Finally, press key to confirm. Last Received (1-1-2) Displays the last 10 calls you received.
♦ Last Received (1-1-4-2) Deletes the record of last received calls. After you press key to enter this item, “Delete All” will appear on the screen. Press press ♦ key to delete the record. You can also key to cancel. Last Missed (1-1-4-3) Deletes the record of last received calls. After you press key to enter this item, “Delete All” will appear on the screen. Press press ♦ key to delete the record. You can also key to cancel. All (1-1-4-4) Deletes all call data.
choose from the options below: Send: press Edit: press key to dial that number. key to edit that record. Delete: press Move: press key to delete that record. key to move that record to another location. Add Record (1-3) This function allows you to add new record to the Phone Book. After selecting this function, you will be prompted to enter the name. Enter the name and press key, then enter the telephone number.
After you select this item, press Book. to clear all records in the Phone Memory Selection (1-5) You can select the memory where the phone book records can be saved. Two options are available: the memory in the SIM card or the memory in your handset. After you enter this item, press key. “SIM” and “Phone” will display on the screen. Press key to select which memory you wish to use, then press key to confirm. Own Number (1-6) Sets or displays the current SIM card number.
key to choose from the following: Delete Message Delete current message. key to delete the message. When deleted, “Deleted, Read Press Next?” will display on the screen. If you want to read the next message, please press key. If you want to exit, please press key. Edit Message Edit current message. Press key to start editing the message. When completed, you can press key to choose from the following options: Send: press key to select this item and send the message to another person.
Send: press key to dial that number. Save: press key, then enter the name for that number. Finally, press key to save the number to Phone Book. Write Message (2-2) You can write short messages with this function. After you press key to enter this function, key in the message you want to send and press key, then choose “Send” or “Save”: Send: press or press key, then enter the receiver’s number and press to send key to cancel. Save: press save, or press key, then enter the receiver’s number.
please press key. If you want to exit, please press key. Edit Message Edit the selected message. Press key to start editing the message. When completed, you can press key to choose from the following options: Send: press key to select this item and send the message to another person. Enter the receiver’s phone number and press Save: press press key. key to save the message. Enter the number and then key. Send Message Send the selected message.
choose preferred topics and languages. You can press the following options: key to choose from Receive Broadcast (2-5-1) Receive the cell broadcast provided by your network service provider. key to enter this item, you can press key to After pressing choose “ON” or “OFF” to decide whether to receive or not. Finally, press key to confirm. Topics (2-5-2) Display the topics of the broadcast message. key to enter this item, you can press After you press key to choose to add a topic or delete a topic.
network service provider. When completed, press key to confirm. Valid Period (2-6-2) You can set the length of time that your text messages are stored at the message center while the message center attempts to deliver them. Press key and use Finally, press key to select a desired valid period. key to confirm. Voice Mail Box (2-6-3) Within this submenu, you can store the phone number of your voice or enter 2-4 Listen Message to dial. mailbox.
Finally, press key to confirm. Message Format (2-6-7) You can ask the network to convert your text message into different formats. Press key and then use the key to select from the following formats: Paging, E-mail, Fax, Voice, ERMES, Telex and G4 Fax. When completed, press key to confirm. Delete All (2-7) Delete all the messages. If you just want to delete certain messages, please refer to pages 21 and 23 for details. Press key, and “Delete All” will appear on the screen. If you want to key.
number without any condition. Press key to display the following options: Activate: after you press key to enter this function, you will be prompted to enter the number to divert to. When you finish entering the number, press key to activate the function. Cancel: press key to cancel the function. Status: press screen. key, and the status of this function will appear on the If Busy (3-1-2) You can send your calls to a designated phone number when your phone is busy.
Status: press screen. key, and the status of this function will appear on the If Unreachable (3-1-4) When the network is unavailable, your calls will be sent to another designated number. Press key to display the following options: Activate: after you press key to enter this function, you will be prompted to enter the number to divert to. When you finish entering the number, press key to activate the function. Cancel: press key to cancel the function. Status: press screen.
provider. When you finish entering the password, press to activate the function. key Cancel: press key to cancel the function. Status: press screen. key, and the status of this function will appear on the Restrict Int’l Out (3-2-2) Restrict all outgoing international calls. key to enter this function, you will be Activate: after you press prompted to enter the password provided by your network service provider. When you finish entering the password, press to activate the function.
Cancel: press key to cancel the function. Status: press screen. key, and the status of this function will appear on the Restrict Roaming In (3-2-5) Restrict incoming calls when roaming. key to enter this function, you will be Activate: after you press prompted to enter the password provided by your network service provider. When you finish entering the password, press to activate the function. key Cancel: press key to cancel the function. Status: press screen.
Cancel (3-3-2) Cancel call waiting function. Press key to cancel this function. Status (3-3-3) Check the status of call waiting function. Press key to check the status of the call waiting function. Call Information (3-4) This function records the information of the call duration and call cost. key to display the following options: Press Last Call (3-4-1) ♦ Call Duration (3-4-1-1) Press key, and the duration of the last call in hours, minutes & seconds will be displayed on the screen.
♦ Clear Duration (3-4-2-4) Press key to clear the call duration data. Call Rate (3-4-3) ♦ Currency (3-4-3-1) Press key to enter a preferred currency base to calculate the cost of your calls (PIN 2 is required). ♦ Charge Unit (3-4-3-2) Press key to enter the unit price to calculate the cost (PIN 2 is required). Cost Limit (ON/OFF) (3-4-4) You can set limits to the total call cost. If the call cost goes over the limit , the handset can’t be used to dial a pay call.
Next Call (3-6) Your handset can receive voice, data and fax calls. Depending on your network service provider, you may have to select among the voice, data and fax calls under this option before you can receive them correctly. This scenario only applies to one number scheme network service providers (i.e., the voice, data and fax calls are all transmitted via a single telephone number). Consult your network service provider to decide if you need to do such a setting.
Auto Redial (4 2) There are two ways to redial a call. Press key, and the following options will appear on the screen: Automatic: after you press key to select this mode, the handset redials the number continuously. key to select this mode, the handset will request Prompt: after you press your confirmation before redialing the phone number Off: you can press key to select this item and cancel all redialing modes. Answer Options (4-3) Three options are available for you to answer incoming calls.
language and press key to confirm and select. Time Alert (4-6) Your phone will beep once a minute when you make a call after you initiate this function. Press key to enter this function and use “Off”, then press key to select “On” or key to confirm. Restore (4-7) Reset all settings to default setting. key, you will be prompted to enter After you enter this function by pressing the phone code (The default setting for the phone code is 1234). Enter the phone code and press key. Press 3.
Set Code Status (6-1) The code status includes: PIN code (6-1-1) You can activate/deactivate the PIN code function here. key, press After you enter this function by pressing and the screen will display two options: “On” and “Off”. Use key again key to select and press key to confirm. When you change the PIN code status, you will be prompted to enter PIN. Phone Code (6-1-2) You can activate/deactivate the Phone Code function here.
PIN2 (6-2-2) What is PIN2? PIN2 is a second set of PIN that is mainly used to control limited services such as call cost limitation and fixed dialing numbers. You can change PIN 2 the same way as described in 6-2-1. Phone Code (6-2-3) You can change your phone code the same way as described in 6-2-1. Network Password (6-2-4) You can change the network password the same way as described in 6-21.
Press key, and the numbers will appear on the screen. Set Status (6-3-2) Switch on/off the Fixed-Dial function. After you enter this function by pressing select “On” or “Off” and press key, press key to key to confirm. Modify (6-3-3) You can add or change records of your fixed-dial numbers. Press key, and the numbers will appear on the screen. You can press key again to add, edit or delete numbers.
After you select this item, press key and you will be prompted to enter the original unlock code. Enter the original unlock code and the new unlock code, then press 3.7 Audio Settings key. (7) Ring Volume (7-1) You can select the ring volume level here. A total of five levels are available. key to change the ring volume After you enter this item, press level. The more bars appear beside the bell icon, the louder the ring volume. Finally, press key to confirm.
Set Alarm (8-1) After entering this function, you can choose to set the alarm function On or Off. If you choose “On”, “Set Alarm” will appear on the screen. You can press key or press alphanumeric keys directly to set the alarm time, then press disabled. key to confirm. If you choose “Off”, the alarm function will be Set Time (8-2) You can set the current time in this function. A total of two options are available: On: you can choose this item to display current time in standby mode and set current time.
enable the alarm function to remind you, you can press the alarm time. If you don’t need the alarm, press notes. key to set key to save the Erase Notes You can choose “Erase One By One” and press key to select and erase notes individually, or choose “Erase All” and when “Erase All Notes?” appears on the screen, press key to erase all notes. View All You can press key to display the notes.
42
43 6-4 SIM Lock 6-3 Fixed Dial 6-1 Set Code Status 6-2 Change Password 6 Audio Settings Security Settings 7-1 Ring Volume 7 8-1 Set Alarm 8-2 Set Time 7-2 Ring Type 7-3 Keypad Tone 7-4 Alarm Type 8-3 Calendar Press SIM 9 4 1 1-4 Delete Record 2-4 Li 2-3 Outbo 2-2 Write Mess 2-1 Inbox 3 2 Messages Phone Book 1-1 Last Number 1-2 Find Record 1-3 Add Record 5-2 Manual Selection 4-7 Restore 4-6 Time Alert 4-5 Language 3-1 Call Divert 3-2 Call Barring 3-3 Call Waiting 3-4 Call Infor
44
♦ Do not use or store your phone in dusty or dirty areas if possible. ♦ Do not disassemble the phone. ♦ Do not use harsh detergents to clean the phone. ♦ If your mobile phone or its accessories are not working properly, contact your dealer immediately.
46
In addition to the travel charger, you can also choose to use the desktop charger or cigarette lighter charger.
Using Desktop Charger Connect the travel charger cable to the desktop charger and the power outlet. Put your phone on the desktop charger as shown.
On the LCD display, the battery strength bars will flash till the battery is full. When you start charging the battery in standby mode, the battery strength bars will start to flash a few seconds after you plug in the phone, indicating that the battery charging has started. Please make sure that the flash mark faces upward when you insert the connector into the battery charging socket.
1000 mAh Li-ion battery 260 minutes 180 minutes 50 280 minutes
hands-free set. Simple Car Kit The simple car kit includes a speaker and a microphone that can be installed in your car. For details, refer to the instructions included with the simple car kit. Car Holder You can also use the car holder (available separately) with your handset to secure your handset in your car. Audiovox Use only genuine batteries, battery chargers and accessories to ensure the proper function of your phone and battery life.
52
Echo or noise The standby time becomes short 2. You are using your mobile phone at a call-crammed time (e.g. rush hour). 3. You are too far from the base station of your network service provider. 1. Due to the quality of the network trunk of your network service provider. 2. Poor local telephone line quality. 1. The standby time can depend on the system settings of your network service provider. 2. The battery life is over. 3.
make a call Wrong PIN You have entered the wrong PIN three times. Unable to 1. The battery or charger is out of charge the order. battery 2. The phone temperature goes under 5°C or above 40°C. 3. Poor connection. Contact your network service provider. Contact your dealer. Change the battery charging environment. Check if all connectors are connected properly. Delete some data from the phone book. Unable to The phone book memory is full.
Cut along the dotted line * Press the phone book number and then press ”#”. Make international call Long press ”*” until ”+” appears on the screen, then key in the national code, area code and telephone number. Manual network selection Press the selection key to enter “Network Selection” and choose “Manual Selection”. The screen will display all available network connections. Press “Send” key to select. Set phone code Press the selection key to enter “Security Settings”, then choose “Phone Code”.
r ap rm 7 1-6 Own Number 1-5 Memory Selection 1-4 Delete Record 1-3 Add Record 2-7 Delete All 1-2 Find Record 2-6 Message Settings 2-5 Cell Broadcast 1-1 Last Number 2-4 Listen Message 2-3 Outbox 2-2 Write Message 2-1 Inbox 2 Messages Phone Book 3 3-1 Call Divert 3-2 Call Barring 3-3 Call Waiting 3-4 Call Information 3-5 Line In Use 3-6 Next Call 4-4 Key Lock 4-5 Language 4-2 Auto Redial 4-3 Answer by 4-1 Back Light 1 key to start 4 9 9-1 SIM SIM 8 5 Network Selection 5-2 Manual Selectio
