Owner`s manual

19
HR7012 REAR SEAT VIDEO HEADREST SYSTEM Owner’s Manual
PICTURE CONTROL
PICTURE CONTROL from the Front Panel (M1 and M2) (Figure 18):
1. Press and hold the MENU/SELECT button on the front panel of the system (Figure 15) for
3 to 5 seconds to show the System Menu. (Figure 13)
2. Use the UP/DOWN direction buttons to select Picture Control and press the
Menu/Select button to enter the sub-menu.
3. Use the UP or DOWN direction buttons to select one of the four setting
in the Sub-Menu (Brightness, Contrast, Color,Tint and Reset). Using the
LEFT/RIGHT direction buttons, adjust the level of the picture setting chosen.
NOTE: Levels are set from “0” to “16” for Brightness, Contrast and Color. The levels for Tint
is set from “-16” to “+16” . No Tint Control in PAL Mode.
4. After level setting(s) are made, the Picture Control sub-menu will automatically disappear
from main screen within 5 or 6 seconds, or press the Menu/Select button again to return
to the System Menu.
PICTURE CONTROL from the Remote Control:
1. Select “M1” or “M2” and press the PIX button to select Picture Control.
2. Use the UP/DOWN direction buttons to select one of the four setting
in the Sub-Menu (Brightness, Contrast, Color, Tint and Reset). Using the
LEFT/RIGHT direction buttons, adjust the level of the picture setting chosen.
NOTE: Levels are set from “0” to “16” for Brightness, Contrast and Color. The levels for Tint
is set from “-16” to “+16”. No Tint Control in PAL Mode.
3. After level setting(s) are made, the Picture Control sub-menu will automatically disappear
from main screen within 5 or 6 seconds, or press the PIX button again.
4. Select reset to return the picture setting control back to factory defaults.
(HR7012S)
(HR7012M)
Figure 18
SYSTEM SETUP SUBMENUS (continued)
Note: Picture control settings for DVD
mode are separate from the other A/V
sources. After adjusting the DVD picture
controls, the user can make separate
settings for the other A/V sources.