Owner`s manual

26
HR7012 REAR SEAT VIDEO HEADREST SYSTEM Owner’s Manual
SYSTEM SETUP SUBMENUS (continued)
DEFAULT AUTO ON/OFF MODEL MM7012
Default AUTO ON/OFF from the Front Panel (Figure 25):
1. Press and hold the MENU/SELECT button on the front panel (Figure 15) of the system for
3 to 5 seconds to show the System Menu.
2. Use the UP/DOWN direction buttons to select DEFAULT AUTO ON/OFF and press the
MENU/SELECT button to enter the sub-menu.
3. Use the UP/DOWN direction buttons to select Default Auto AV, M1 or OFF and press the
MENU/SELECT button to enter selection.
Note:
• Default Auto AV: HR7012S monitor(s) will automatically turn ON when a connected
video source is detected and turned ON. NOTE: This feature will only work if the
system is installed with an external source connected to the A/V IN of the unit.
• Default Auto M1: HR7012S (M2) monitor(s) will automatically turn ON when the
HR7012M (M1) is rst turned ON.
• Default Auto OFF: HR7012S (M2) monitor(s) will not turn ON automatically when
HR7012M (M1) is turned ON or if a connected video source is detected and turned ON.
Default AV AUTO ON/OFF from the Remote Control
1. Select “M1” or “M2” on the Remote Control.
2. Press the SYSTEM MENU button then use the UP/DOWN direction buttons (Figure 11) to
select DEFAULT AV AUTO ON/OFF and press the ENTER button to enter the sub-menu.
3. Use the UP/DOWN direction buttons to select DEFAULT AV AUTO ON/OFF and press the
ENTER button to enter the sub-menu.
Figure 25
SYSTEM
MENU
OSD
LANGUAGE
IRT
ON/OFF
FM
MODULA
TOR
DEFAULT
DVD
ON/OFF
VOLUME CONTROL
PICTURE CONTROL
SYSTEM
MENU
VOLUME CONTROL
PICTURE CONTROL
FM
MODULA
TOR
OSD
LANGUAGE
IRT ON/OFF
DEFAULT AUTO
ON/OFF
EXIT
HR7012S (M1)
HR7012S (M2)
SYSTEM
MENU
OSD
LANGUAGE
IRT
ON/OFF
FM
MODULA
TOR
DEFAULT
DVD
ON/OFF
VOLUME CONTROL
PICTURE CONTROL
SYSTEM
MENU
VOLUME CONTROL
PICTURE CONTROL
FM
MODULA
TOR
OSD
LANGUAGE
IRT ON/OFF
DEFAULT AUTO
ON/OFF
EXIT