Owner`s manual
3
HR7012 REAR SEAT VIDEO HEADREST SYSTEM Owner’s Manual
The HR7012 Rear Seat Video Headrest
System consists of:
1. Two factory matched Headrests with
7-inch Color TFT-LCD Display Screen
(800x480) 16:9 aspect ratio. (See
conguration options on previous page)
2. Two Wireless Infrared (IR) Headphones
equipped with volume control and A/B
switch to select between “M1” and “M2”.
Note: The wireless IR headphones must
be used within a line of sight from the
transmitter as infrared transmission,
like visible light, travels only in an
unrestricted line of sight.
3. Two Infrared (IR) Transmitters for
listening to audio signal through Wireless
IR Headphones.
4. One wireless FM transmitter used to
listen to audio (M1 only) through the
vehicle’s FM radio by tuning to one of 100
frequencies. Try each station frequency
until you achieve a clear audio signal.
Note: Whenever the FM transmitter
is active, regular radio reception may
be poor. Turn the FM transmitter
o to allow normal radio reception
PRODUCT FEATURES
5. Two sets of Audio/Video (AUX)
Signal Input Jacks (yellow, white
and red) used to connect items
such as a DVD player, video game
device, or other audio/video devices.
Two 1/8-inch (3.5mm) Wired Stereo
Headset Jacks that can be used with any
standard stereo headphones.
6. USB Port (HR7012M only) used to connect
a USB memory device (eg. thumb drive)
Content on the USB device can be played
by selecting “DVD” as the video source.
The USB device will automatically start
up upon connection, thereby overriding
the DVD disc. Disconnect the USB device
to play DVD’s and CD’s.
7. Remote Sensor on the Front Panel.
8. One Full Function Remote Control to
operate either headrest by selecting “M1”
or “M2”.”
9. Control Buttons on the Front Panel
POWER, SOURCE, VOLUME UP/DOWN,
STOP, EJECT, MENU/SELECT.
10. OSD (On Screen Display) menus.