TM Model: KLV39120CE 12” Kitchen LCD TV / DVD Combo OWNER’S MANUAL R 1 Need More Help? Please visit online help at http://www.1800customersupport.
SAFETY PRECAUTIONS The lightning flash with an arrowhead symbol, within the equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The following marks and symbols are located on back of the unit.
SAFETY PRECAUTIONS FCC Information This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with a dry cloth. 7. Do not block any of the ventilation openings. Install in accordance with the manufacturer's instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9.
TABLE OF CONTENTS Safety Precautions .............................1-2 Important Safety Instructions Table of Contents Repeat Playback ............................................. 19 ................. 3 DVD Programmable Memory ........................... 20 ................................. 4 DVD Programmable Memory ........................ 20 Disc Formats ........................................ 5 Viewing JPEG FILes ....................................... 20 Accessories .........................
DISC FORMATS The unit can play DVDs [8cm/12cm disc] Compatible Audio CDs [8cm/12cm disc] Region Management Information Region Management Information: This unit is designed and manufactured to respond to the Region Management Information that is encoded on DVDs. If the region number printed on the DVD does not correspond to the region number of this unit, this unit cannot play that disc. The region number of this unit is 1.
ACCESSORIES Please Check and Identify the Included Accessories. Remote control ............................................................................................................................. x 1 AAA 1.5V battery .......................................................................................................................... x 2 Mounting template ......................................................................................................................... x 1 1.
CONTROL REFERENCE GUIDE Remote Control FUNCTION Button Use to select DVD, TV or RADIO mode. 2) PICTURE Button Selects from preset screen display settings to match the type of show you are watching. 3) MEMORY Button Sets title/chapter in a favorite order. Enter the number of a selected station. • [dot] Button Press to enter digital sub-channels (i.e. 11.3, 12.7). Button 4) EXIT/RETURN Press to exit the TV menu and return directly to normal viewing.
CONTROL REFERENCE GUIDE Remote Control 13) STANDBY/ON Button Turns on the unit and puts it in standby mode. 14) Number (0-9) Buttons 15) LAST CH Button Press to switch repeatedly between the last two channels displayed. 16) TV MENU Button Press to display the on-screen TV menu. 17) CURSOR ( , , , ) Buttons Use to highlight selections on a screen and make adjustments to certain settings. CH+ / CH- buttons Use to change TV channels. ENTER Button Confirm selections on a menu screen.
CONTROL REFERENCE GUIDE Unit 1 2 3 4 5 6 7 8 9 10 1112 13 14 15 16 17 1) 2) 3) 4) 5) 6) 7) 8) 9) 10) DVD/TV/RADIO Button Use to select DVD, TV or RADIO mode. 11) TIMER Button Use to set the cooking timer. 12) PREV/ NEXT/ ADJUST Buttons PREV Button to go back to previous chapters/ Press tracks. NEXT Button Press to advance to chapters / tracks. ADJUST Buttons Makes adjustments to certain settings. Use to search for a station automatically or select presetted stations.
MOUNTING INSTRUCTIONS TOOLS NEEDED: 1) Electric drill with 1/4” bit; 2) Phillips-head (cross style) screwdriver. STEP 1 If your cabinet does NOT have an overhang: a) Place the Mounting Template in the desired location inside or underneath the cabinet (whichever has less obstructions, and will be easier for you to reach to drill holes), flush with the front edge of the cabinet and tape it down. Go to STEP 2.
MOUNTING INSTRUCTIONS (Continued from previous page) c) Insert the four selected screws through each hole from the inside of the cabinet going down (see Figure 5). e) Partially tighten each screw, but do not fully tighten the screws until all of them have been started (see Figure 6).
CONNECTIONS Connecting the TV Antenna Connect a TV antenna or CATV cable or Satellite system to the TV antenna terminal. TV antenna 2 To the TV ANT IN terminal 1 Connecting the Unit to a TV or other Video Equipment Use the Video cable (not supplied). Connect the VIDEO OUT on the rear of the unit to the VIDEO IN on your TV or other video equipment.
CONNECTIONS Plugging in the Unit Plug the AC power cord into the wall outlet a) Before plugging in the power cord, make sure the voltage of the unit matches your local voltage. b) Plug the power cord directly into the nearest wall outlet, and wrap the remaining cord around the cord storage knob at the rear of the unit. CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT OF WALL OUTLET, THEN FULLY INSERT.
UNIT OPERATION Turning the Unit On While the power cord is connected and the unit is on standby, power will be consumed and only the clock display will flash. • Press the ON/OFF button to turn the unit on and the DVD indicator lights up. After a short period of time, “DVD” will appear on the front display and the DVD logo (start-up picture) will appear on the screen. • Press the DVD/TV/RADIO button (the FUNCTION button on the remote control) to TV mode and the TV indicator lights up.
SETTING THE CLOCK To adjust the clock, the unit must be in standby mode. To enter standby mode, make sure that the unit is plugged in, but not turned on. • Check that the rated voltage of the unit matches your local voltage. 1. When the AC power cord is plugged in, the clock display will blink. / buttons to set the current 3. Press the hours then press the SET CLOCK button once to confirm. Then, the MINUTE blinks. 2. Press the SET CLOCK button until the HOUR blinks. 4.
PLAYING A DISC This owner’s manual explains the basic instructions of this unit. Some DVDs are produced in a manner that allows specific or limited operation during playback. Such as, the unit may not respond to all operating commands. This is not a defect in the unit. Refer to the instruction notes of discs. “ ” may appear on the screen during operation. A “ permitted by the unit or disc. ” means that the desired operation is not Playing a Disc 1. Press the ON/OFF button to turn on the unit. 2.
PLAYING A DISC Angle Selection Some DVDs contain scenes which have been shot from a number of different angles. For these discs, the same scene can be viewed from each of these different angles. 1. While you are playing a DVD with different angles recorded, press the ANGLE button to view the number of current angles available. 2. Press the ANGLE button repeatedly to change the scene to the next angle in those recorded. • About two seconds later, playback continues from the new angle selected.
PLAYING A DISC Display Function While the disc is playing, press the DISPLAY button on the remote control repeatedly to display information on operation status. Time: The elapsed time from the beginning of the title which is currently playing. Title/Chapter: The number of the title/chapter currently playing and total titles/chapter on disc. Audio: The type of the audio currently selected is displayed. Subtitle: The subtitle number and language currently selected is displayed.
SPECIAL FUNCTION Setting Favorite Bookmarks During Playback While a disc is playing, you can mark the desired scene. 1. Press the GOTO button until Bookmark1 appears. 2. Press the ENTER button to mark the desired scene and the time of this point will be shown in Bookmark1. 3. Press the ENTER button to play the favorite bookmark. To Set Other Bookmarks 1. Press the GOTO button until Bookmark1 appears, then use the or button on the remote to select Bookmark2/Bookmark3. 2. Press the ENTER button.
DVD PROGRAMMABLE MEMORY DVD Programmed Playback You can combine your favorite titles/chapters and play them in the order you determine. 1. Press the MEMORY button on the remote control. 2. Use the or button to select the title you want, then press the ENTER button on the remote control to confirm. 3. Use the or button to select the chapter you want, then press the ENTER button on the remote control. 4.
PLAY MODES FOR CD OR JPEG DISC When playing CD/JPEG discs, you can modify the Play Modes through the Toolkit which appears on the right in the window. Press the or button on the remote control to navigate between the left/right windows and the or button on the remote control to select files/tracks or play mode items. Then press the ENTER button. CD Track/JPEG File Programmed Playback 1. Use the and buttons on the remote to select "Edit mode" then press the ENTER button. 2.
CUSTOMIZING THE FUNCTION SETTINGS Language OSD Language 1. Press the SETUP button in stop mode. button to select OSD Language. 2. Press the 3. Press the button. Use the or button to make adjustments, then press the ENTER button. The screen will change to your selected language immediately. 4. Press the EXIT button to return to the normal screen. Subtitle 1. Press the SETUP button in stop mode. 2. Press the button. Use the or button to select Subtitle. 3. Press the button.
CUSTOMIZING THE FUNCTION SETTINGS Notes: • The displayable picture size is preset on the DVD. Therefore, the playback picture of some DVDs may not conform to the picture size you select. • When you play DVDs recorded in the 4:3 picture size only, the playback picture always appears in the 4:3 picture size regardless of the TV Shape setting. • Select 16:9 to conform the LCD screen on the unit. Always be sure that your TV Shape conforms to the actual TV in use if you connect the unit to a TV. View Mode 1. 2.
USING THE TV Connect a TV antenna or CATV cable or Satellite system to the TV antenna terminal before searching TV channels Searching for TV channels automatically (Only appears to the first time Power ON) 1. Connect the TV antenna. 2. Connect the AC power cord. 3. Press the ON/OFF button to turn on the unit. 4. Press the DVD/TV/RADIO button (the FUNCTION button on the remote) to select TV mode. 5. Press the ENTER button to proceed with auto scan.
TV SETUP Picture Setting 1. Press the TV MENU button. 2. Use the or button to select the options (Picture Mode / Contrast / Brightness / Sharpness / Tint / Color). 3. Use the or button to make adjustment. The screen will change to your selected mode immediately. Press the TV MENU button to return to the previous menu. Picture Mode Standard Contrast 50 4. Repeat steps 2 and 3 to adjust other options. Brightness Sharpness 50 50 5.
TV SETUP TV Timer Setting 1. Press the TV MENU button. 2. Use the or button to select TIMER SETTING. 3. Use the or button to select the options (OSD Duration / Time Zone / Day Saving Time). 4. Use the or button to make adjustment. Press the TV MENU button to return to the previous menu. 5. Repeat steps 2 to 4 to adjust other options. OSD Duration 30 Sec Time Zone Day Saving Time Pacific Off Clock ----/--/-- --:-- 6.
TV SETUP TV Channel Setting 1. Press the TV MENU button. 2. Use the or button to select TV CHANNEL SETTING. 3. Use the or button to select the options (Antenna / Auto Scan / Auto Scan Add CH / Channel Skip / Channel No. / Channel Label). 4. Use the or button to make adjustment. The screen will change to your selected mode immediately. Press the TV MENU button to return to the previous menu. 5. Repeat steps 2 to 4 to adjust other options. 6.
LISTENING TO THE RADIO Tuning in to a Station Manually 1. Press the DVD/TV/RADIO button (the FUNCTION button on the remote) until the radio frequency appears on the front panel display. 2. Press the / BAND (AM/FM) button to select AM or FM. 3. Press the TUNING buttons on the remote to tune in to a desired station. • When MUTE is pressed, the sound is mute and the “L O” indicator always blinks on the LCD display until MUTE is pressed again or VOL is pressed.
TROUBLESHOOTING GUIDE SYMPTOM CAUSE (AND REMEDY) No power. • Ensure the AC power cord is connected. • The unit is not turned on. The remote does not function. • • • • DVD No sound or only a very low-level sound is heard. Remove any obstacles between the remote and the unit. Use the remote near the unit. Point the remote at the remote sensor on the unit. Replace all batteries in the remote with new ones. • Make sure that you've selected DVD mode. • The system is in pause mode.
MAINTENANCE Cleaning the Disc A defective or soiled disc inserted into the unit can cause sound to drop out during playback. Handle the disc by holding its inner and outer edges. • Do NOT touch the surface of the unlabeled side of the disc. • Do NOT stick paper or tape on the surface. • Do NOT expose the disc to direct sunlight or excessive heat. • Clean the disc before playback. Wipe the disc from the center outward with a cleaning cloth.
LIMITED WARRANTY VENTURER ELECTRONICS (“VENTURER”) makes the following limited warranty. This limited warranty extend to the original consumer purchaser and is limited to non-commercial use of the product. Ninety (90) Day Parts & Labor Warranty VENTURER products purchased in the United States are warranted to be free from defects in materials or workmanship for a period of ninety (90) days from the date of their original retail purchase.
