Model: LCD4WM 3.5” Window Mounted LCD Monitor User Manual Features 3.
Warnings The product is intended to assist in safe driving and to allow the driver to have a broader rear view while the vehicle is in reverse. You, as the driver, are solely responsible for the safe operation of your vehicle and the safety of your passengers according to local traffic regulations. Do not use any features of this system to the extent it distracts you from safe driving. Your first priority while driving should always be the safe operation of your vehicle.
Product Description This advanced high resolution monitor will show a clear picture from a reversing camera or any other video source. The modern thin design with built in speakers are more is more advanced than competitive products. The LCD is perfect for use on your car, truck, or van. This wired Monitor is designed for use with an Advent camera but is compatible with most video sources and other cameras and can be connected using a standard RCA connector.
Adjusting Settings All adjustments are made in the MENU. After three seconds of inactivity the menu will be hidden. Four titles will show on screen: MENU - Pressing the menu button will scroll through the submenu items such as VOLUME, BRIGHTNESS, AUTO BRIGHTNESS, CONTRAST, HUE, SATURATION, MIRROR, RESET, LANGUAGE, GUIDELINE (G1, G2, G3, OFF), GUIDELINE ADJUSTMENT. UP - In the opening menu, the UP button increases the speaker volume.
Troubleshooting Symptom No power to the monitor Solution 1. Check that reverse power is attached to orange wire. 2. Check that accessory power is attached to red wire 3. Check that black is attached to vehicle body (ground) 4. Check fuse and if blown ONLY replace is fuse of same amperage. 1. Check that camera is functioning correctly 2. Check that orange wire is attached to reverse power. 3. Check that backup camera is attached to input CAM1.
