LCM-5600NP 5.
EXPLANATION OF GRAPHIC SYMBOLS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL The lightning flash with the arrowhead within a triangle is intended to alert tell the user that parts inside the product are capable of producing an electric shock .
SPECIFICATIONS 1. Type: Color Liquid Crystal Display (LCD) Monitor 2. Display Screen Size: 5.6 inches (114.2 x 83mm) ( W x H ) Element : TFT LCD Format : 480 (W) x 234 (H) dot Total 112,320 dot 3. Back Light: Cold Cathode Fluorescent Lamp 4. Power Source: +12 VDC 5. Power Consumption: 11W 6. Connection Terminals: Video/Audio Input Jacks (RCA) External Power Jack (DC IN 12V) IR Jack 7. Operating Temperature: 32°F - 104°F (0°C - 40°C) 8. Storage Temperature: -4°F - 176°F (-20°C - +80°C) 9.
CONTROLS AND INDICATORS FRONT PANEL 1 2 3 4 5 6 1. Power On LED Indicator 2. Power On/Off Switch 3. Remote Control Sensor 4. Picture Select 5. On Screen Adjustment Up Button 6.
REAR PANEL To Optional IR Transmitter Part Number IRT456 NOTE(B) NOTE(A) 7. Power Input Connector: To IR Tansmitter (Optional) 8. Video Signal Input Connector 9. IR Repeater Connector 10. IR Repeater Transmitter 11. Audio Right Channel Input Connector 12.
Note A : This cable (10) is utilized to connect to Video Cas- sette Players that do not accept the IR Repeater 1/8" (3.5mm) style plug (9). The IR Repeater Transmitter is provided with an adhesive that allows it to adhere to Video Cassette Player remote sensor. Remove the backing covering the adhesive and place the IR Repeater Transmitter directly over the Video Cassette Player remote sensor. Note B : Connector (11) and (12) are Audio input Jacks reserved for optional IR Wireless Transmitter use (IRT456).
GENERAL INSTALLATION INFORMATION 1. Installation will vary from vehicle to vehicle, as headrests in vehicles are not standard. 2. This unit is intended for installation by professional installers. 3. The kit consists of the screen assembly, a mounting housing, key to remove screen from housing, wiring harness, remote control unit and remote control unit batteries. 4.
NOTE: A Remote Control Unit is included which will perform the Functions and adjustments of Operation items 3, 4, and 5 as well as additional features as noted below. REMOTE CONTROL FUNCTIONS: LCD/VCP: ........ Power button for LCD/VCP REPLAY: .......... Press to rewind tape and automatically go to play mode. PICTURE SEL: .On Screen Display (OSD) for color, tint, brightness, contrast. Use ± to adjust REW: ............... Rewinds tape FWD: ............... Fast Forward tape PLAY: ...............
