LCM972TS 7” Rearzone Touch Screen Monitor for: VME 9122 TS VME 9512 TS VME 9312 TS 12
Precaution 14 Accessories 15 Main Features 15 Discription for keys 16 Diagramm for connections 17 Basis operations 18 Parameters adjust 21 Warranty Card 46 13
Precaution Warning: 1. Only connect the unit to a 12-volt power supply with negative grounding Warning: 2. Before installation, please make sure proper connections are conducted. Otherwise, the unit will be damaged by short circut. Warning: 3.Never install this unit where the operation & condition for safety driving is restrained Warning 4.Never use the video display function in the front when driving to prevent the violation of laws & regulations and also to reduce the risk of traffic accident.
ACCESSORIES MAIN FEATURES Subject to technical changes • 7 inch true color TFT LCD display • Touch screen function • Auto Dimmer • English OSD • NORMAL / FULL / WIDE display mode • Image mirror function • Auto detect for NTSC / PAL • BUS communication and transport control, connectable at VME 9122 TS, VME 9512 TS, VME 9312 TS • 1 composite video / stereo audio signal input (RCA) • 1 composite video / stereo audio signal input (Mini) • Stereo headphone output • Slim size and almighty installation methods
Description for Keys Reset key Induction window for surroundings rays Receiving window for remote control Power/Mute key Source selection/Menu key Volume down/down direction key Volume up/up direction key Output jack for earphone stereo Input jack for external audio and video signal Subject to technical changes 1. 2. 3. 4. 5. 6. 7. 8. 9.
Subject to technical changes Diagramm for connections 17
BASIC OPERATIONS Power on / off • Under standby mode, pressing the [POWER/MUTE] key briefly to turn the unit on. • Under work mode, pressing and holding the [POWER/MUTE] key to turn the unit off. Source switch • To switch mode between play mode and menu mode, press the [SOURCE/ MENU] key briefly. • To switch play mode between two AV input (AV1 and AV2), press and hold the [SOURCE/MENU] key. Mute • Under work mode, pressing the [POWER/MUTE] key briefly to close the audio output.
PARAMETERS ADJUST You can adjust the parameters according to the environment and your interest to get the best display effect. Enter Main Menu • To enter menu mode, press the [SOURCE/MENU] key or touch the top area of the display. The main menu will be displayed as follows: Enter Main Menu • Under main menu mode, pressing and holding the [SOURCE/MENU] key or touching the exit option or stopping operation for some seconds to exit main menu mode.
PARAMETERS ADJUST Parameter items are displayed after entering a sub-menu. You can adjust the values by touching, (Need touch screen function to support.) or using the keys on the panel as well. The steps will be followings when you do the operation by pressing the keys on the panel: Pressing the [ ] [ ] key to select one item; Pressing the [SOURCE/MENU] key to confirm; Pressing the [ ] [ ] key to adjust the value.
PARAMETERS ADJUST FUNCTION The following menu will be displayed after entering the 'FUNCTION' option: (1)BLUE SCREEN The background is blue screen when this option is set to ON . The background is black screen when this option is set to OFF . (2)DISPLAY MODE Adjustable value of display Mode: Normal / Full / Wide. You can select different display modes according to different playing sources to get the best effect. (3)Mirror Image Adjustable value of Mirror Image: Normal / Left/Right / Up/Down / L/R U/D.
LCM 972 connected at the VME 9122 TS, VME 9512 TS and VME 9312 TS The LCM 972 TS is able to control most of the headunits touch screens buttons if the BUS connection cable is connected with the moniceiver (MZ-TFT) BUS output. Then you have the opportunity to control i.e. fully the rearzone by using the TS Monitor of the LCM 972 TS.
