ME 412 Media Receiver
Inhalt Sicherheitshinweise 1 Bedienelemente der Konsole 2 Hinweise zur Bedienung über die Tasten 4 USB/SD/MMC MP3 - Wiedergabe5 MP3-Wiedergabe 6 Buchstabeneingabe zur Suche nach MP3-Titeln RDS ( Radio Data System ) 8 Menüfunktionen 10 Elektrische Verbindungen 11 Installationsanleitung 12 Diebstahlsicherung 13 Problembehebung 14 Technische Daten 15 2 7
Sicherheitshinweise Vorsichtsmaßnahmen Verwenden Sie nur eine 12 Volt-Gleichstromversorgung mit negativer Masse. Lösen Sie das Batteriekabel vom negativen Pol der Batterie, während Sie das Gerät installieren und anschließen. Achten Sie bei Austausch der Sicherung darauf, dass die neue Sicherung über die richtige Amperezahl verfügt. Wenn Sie eine Sicherung mit einer höheren Amperezahl verwenden, kann das Gerät nachhaltig beschädigt werden. Bauen Sie das Gerät nicht auseinander.
Bedienelemente der Frontblende Drücken Sie auf eine beliebige Taste auf der Frontblende, um das Gerät einzuschalten. 1. Ein-/Ausschalten - Stummschaltung 2. Fernbedienungssensor 3. Senderspeicher automatisch belegen /Sendersuchlauf Suche nach MP3-Titeln/-Dateien/Buchstaben im Titel 4. Reset-Taste 5. Lautstärkeregler - Drücken Sie auf den Regler, um BAS/TRE/BAL/FAD auszuwählen und drehen Sie den Regler anschließend, um die Lautstärke einzustellen. Menümodus (länger als 2 Sekunden gedrückt halten) 6.
Hinweise zur Bedienung über die Tasten AMS: Auto Memory Store (Automatischer Senderspeicher) Drücken Sie kurz auf diese Taste, um die gespeicherten Sender 1 bis 6 nacheinander für jeweils 5 Sekunden anzuspielen. Wenn Sie die Taste länger als zwei Sekunden gedrückt halten, werden die 6 Sender, die das stärkste Empfangssignal ausgeben, automatisch für die Speichertasten 1 bis 6 gespeichert. Einstellen der Uhrzeit Wenn Sie auf die Taste DISP drücken, wird die Uhrzeit angezeigt.
USB-/SD-/MMC MP3-Wiedergabe 1. Einlegen der SD-/MMC-Karte Legen Sie die SD/MMC-Karte in den Kartensteckplatz ein. Achten Sie darauf, dass die obere Seite nach rechts ausgerichtet ist. Das Gerät startet die Wiedergabe der auf der Karte gespeicherten Titel automatisch. Im Display wird CARD angezeigt. 2. Auswerfen der SD-/MMC-Karte Drücken Sie auf die Taste SRC, um den CARD-Modus zu beenden. Drücken Sie leicht auf die SD/MMC-Karte und nehmen Sie die ausgeworfene Karte heraus. 3.
MP3 / iPod - Wiedergabe Während der USB-/SD-/MMC-MP3-Musikwiedergabe kann der Name des Ordners bzw. der Datei und das ID3-Tag (Titel des Stücks, Name des Albums und Künstler) über das ganze LCD-Display laufen. (Drücken Sie mindestens einmal auf die Taste DISP, um weitere ID3-Informationen anzuzeigen.
Buchstabeneingabe zur Suche nach MP3-Titeln Drücken Sie auf die Taste AMS, um den Modus CHAR SCH zu aktivieren. Wenn Sie den Regler länger als eine halbe Sekunde gedrückt halten, wird die Wiedergabe des Titels gestartet, der mit dem Buchstaben "A" beginnt. Wenn Sie einen Titel wiedergeben möchten, der mit einem anderen Buchstaben beginnt, drehen Sei den Regler, um den gewünschten Buchstaben auszuwählen, und bestätigen Sie die Auswahl, indem Sie auf den Regler drücken.
RDS ( Radio Data System ) Die Verfügbarkeit des RDS-Dienstes kann regional variieren. Berücksichtigen Sie, dass der nachfolgend beschriebene Dienst nicht verwendet werden kann, wenn er in Ihrer Region nicht verfügbar ist. Grundlegende RDS-Funktionen Alternative Frequenzen (AF = Alternative Frequencies): Wenn das Empfangssignal des Radiosenders schwach ist, sucht das Gerät automatisch nach einem Sender mit derselben PI (Programm-ID) und einem stärkeren Empfangssignal, wenn die AFFunktion aktiviert ist.
Verkehrsdurchsagekennung Einige UKW-Sender mit RDS-Unterstützung stellen in regelmäßigen Abständen Verkehrsdurchsagen bereit. Verkehrsfunkkennung (TP-ID = Traffic Program Identification): Übertragung von Verkehrsdurchsagen Verkehrsdurchsagekennung (TA-ID = Traffic Announcement Identification): Radiodurchsagen zur Verkehrslage TA-Modus: Wenn der TA-Modus aktiviert ist, blinkt die TA-Anzeige im Display. Wenn eine Verkehrsdurchsage empfangen wird, wird die TA-Anzeige eingeblendet.
Menüfunktionen Halten Sie den Regler länger als zwei Sekunden lang gedrückt, um das Menü aufzurufen. Indem Sie dann auf den Regler drücken, werden nacheinander folgende Modi aktiviert: EQ-Modus - BEEP ON/OFF - LOUD ON/OFF-Modus - TA VOL - TA SEEK/TA ALARM – RETUNE-Modus – SUW-Modus - VOL LAST/ADJ EQ-Modus Drehen Sie den Regler, um den gewünschten EQ-Effekt auszuwählen: NORMAL - ROCK - POP - CLASSIC - FLAT BEEP-Modus Drehen Sie den Regler, um den Signalton ein- oder auszuschalten.
RETUNE-Modus RETUNE-Modus: Drehen Sie den Regler, um den Modus RETUNE-S oder RETUNE-L auszuwählen. RETUNE-S oder RETUNE-L geben das Einstellungsintervall für den TA SEEK-Modus an. RETUNE-S: Kurzes Intervall (45 Sekunden). RETUNE-L: Langes Intervall (180 Sekunden). Anmerkung: Der RETUNE-Modus kann nur verwendet werden, wenn der TA SEEK-Modus aktiviert ist.
Elektrische Verbindungen Schaltbild 13
Montageanleitung Montageschritte Nehmen Sie zunächst die Verkabelung vor und stellen Sie sicher, dass alle Anschlüsse richtig sind. Öffnung im Armaturenbrett Das Gerät kann in jedes Armaturenbrett eingebaut werden, das über die unten dargestellte Öffnung verfügt. Das Armaturenbrett sollte für die Montage des Geräts mindestens eine Dicke von 4,75 bis 5,56 mm aufweisen. Montage 1.Setzen Sie den Montagerahmen ins Armaturenbrett ein und biegen Sie die Montagelaschen mit einem Schraubenzieher um.
Herausnehmen des Geräts 1. Nehmen die Abdeckung ab. 2. Lösen Sie die 3 Montageschrauben oben und unten. 3. Nehmen Sie das Gerät heraus. 4. Trennen Sie alle Kabelverbindungen zwischen dem Gerät und dem Fahrzeug. Problembehandlung Wenn Sie eine Fehlfunktion des Geräts vermuten, schalten Sie es umgehend aus. Verwenden Sie das Gerät nicht, wenn offensichtlich eine Fehlfunktion vorliegt, zum Beispiel, wenn das Gerät keinen Ton ausgibt, bei Austreten von Rauch oder außergewöhnlichen Gerüchen.
Technische Daten Allgemein Spannungsversorgung: Maximale Ausgangsleistung: Kontinuierliche Ausgangsleistung: Empfohlene Lautsprecherimpedanz: Sicherung: ESP (Electronic Shock Protection) (MP3) Gewicht: Abmessungen (Breite x Höhe x Tiefe) FM (UKW)-Stereo-Radio Frequenzbereich: Modus) Nutzbare Empfindlichkeit: Frequenzgang: Kanaltrennung: Spiegelfrequenzanteil: Zwischenfrequenzanteil: Rauschabstand: AM (MW)-Radio Frequenzbereich: Nutzbare Empfindlichkeit (S/N = 20 dB): 12 V Gleichstrom (11 V bis 16 V) Tests