Installation manual
6
2.
For antenna
mounting
locations at the front or middle
of
the roof,
the cable can be routed
down
along the
door
jam and into the
car.
In
some
cars,
the cable may be brought into the vehicle through the
grommet
in the door jam which carries the power
window
and power
lock wires.
If
the cable does
not
fit
easily through this grommet,
do
not
try
to
force
it
through. Instead, route the cable under the weather
seal
near the lowest part
of
the trunk
to
reduce possible water
leaks.
3.
Use
pre-existing wiring channels created by the vehicle manufacturer
whenever possible.
The antenna contains a powerful magnet that will secure
it
to
a metal
roof
under normal driving conditions.
No
additional tools should be
needed
to
mount
the antenna.
Step 1
Remove the car stereo head
unit
from your dash board.
Important: Depending on
how
your head
unit
was
installed you may
have
to
remove part or all
of
your dashboard
to
remove the
head
unit
before the head unit
can
be pulled out.
You
may
also have
to
remove screws
to
complete this step.
Step2
Connect the cable into the
PIA.
Plug the other end
of
the cable into the
head
unit
adapter.
Read
your cable installation manual for proper
installation
to
your specific head unit.