Owner's Manual

TROUBLESHOOTING

PROBLEM

IR sensor inoperative

— Verify that the battery in the remote is fresh.

— Verify that the remote sensor eye is not obstructed.

Disc won't play

— Check the type of disc you put into disc tray. This monitor accepts only DVDs,

audio CDs and MP3s.

— Both the unit and the disc are coded by region. If the regional codes don’t match,

the disc can’t be played.

No sound or distorted sound

— Make sure external DVD is connected properly. Make sure all cables are securely

inserted into the appropriate jacks.

— If you are using the IR headphones, make sure you turn on the IRT power, and

make sure the IR headphones are set to the correct channel (A or B), and that the

corresponding headrest IR transmitter is set to the correct channel.

Play starts, but then stops immediately

— The disc is dirty. Clean it.

— Condensation has formed. Allow external player to dry out.

SOLUTION

— Disc loaded backwards, turn disc over.

OSD Displays “Incorrect Disc Format”