MMD7HRPKG Two Specific Vehicle Headrests With 7” LCD Monitors and Built-In DVD Player for Rear Seat Entertainment Operation Manual 128-8281
IMPORTANT Installation of headrest products require careful planning and preparation. Be extremely careful of seats that have airbags built into them. Keep wiring away from any air bag wiring (usually identified by yellow connectors and yellow wire jackets). Damage to air bag wiring can result in personal injury to vehicle occupants. If you have any questions regarding wire routing or installation in a vehicle, please contact Audiovox Technical Support at 1-800-225-6074.
MMD7HRPKG The MMD7HRPKG contains two headrests. The master unit M1 (MMD7HRM) has a built-in DVD player and the satellite unit M2 (MMD7HRS) has a monitor that is used to either watch the DVD movie that is playing in the master unit or a video source plugged into the AUX jack on the front of the unit. The full function remote control can operate either unit by selecting M1 or M2 on the remote. Each monitor has an AUX input and wired headphone jack on the bottom right hand side of the screen.
CONTROLS AND INDICATORS DIAGRAM MMD7HRM M1 Control Function Descriptions for MMD7HRM and MMD7HRS Monitor 1 EJECT 2 MMD7HRM / MMD7HRS Panel Control 1. 2. 3. 4. 5. DVD disc insertion slot EJECT Button – Press this button to eject the disc. Power Indicator LED POWER Button – Press to turn the unit ON/OFF. SCREEN MODE Button– Press this button to select between 9 Wide(16:9), Normal(4:3) aspect ratio or screen off (display OFF). 6. PLAY Button – Press this button to start playback. S 7.
MMD7HRPKG SYSTEM OVERVIEW 1) The MMD7HRPKG SYSTEM is a versatile audio / video system with built-in DVD player (MMD7HRM only) which includes two monitors, that can accept an Audio / Video input and independent AUX input. A separate audio output is provided for connecting an optional FM Modulator to the vehicle's radio. 2) The M1 Monitor (MMD7HRM) is comprised of a 7" TFT LCD monitor with built-in DVD player that allows the user to select from the DVD, and the AUX source.
9) Pivot the screen until a comfortable viewing angle reached. The internal lock limits the screen to a maximum adjustment of 30 degrees from closed position, the headrest itself can be tilted forward to help achieve a comfortable viewing position. Inner Ring Internal Lock Closed Position 10) Insert disc 11) Eject disc Disc Label Insert disc 30 degrees MMD7HRPKG: MMD7HRM Monitor only. Eject disc MMD7HRPKG: MMD7HRM Monitor only.
REMOTE CONTROL OPERATION 1 2 3 4 CR2025 5 Initial Use When purchased the remote control has a battery installed with a Pull Tab to prevent battery discharge. Remove the Pull Tab before attempting to use the remote. 27 26 25 24 23 22 21 6 20 7 8 9 10 11 19 18 17 16 15 12 Battery Replacement 1. Remove the battery holder. 14 2. Insert the battery into the battery holder and insert the battery holder into the remote. Be sure to observe the correct polarity. 13 3.
REMOTE CONTROL FUNCTION DESCRIPTIONS * Function/control is available on the unit and remote control. ** Function/control is not available on this model. NOTE: To control the individual units (MMD7HRM Monitor / MMD7HRS Monitor) press either M1 or M2 before pressing any other button. For example, to turn MMD7HRM Monitor ON, press M1 and then the power button. 1. POWER Button* – Press this button to turn MMD7HRM or MMD7HRS Monitor on / off. 2. MUTE Button – Press this button to mute the audio.
10. ZOOM Button – Press this button to enlarge the picture when playing a DVD disc. Press ZOOM button DVD player perform Once Enlarge the picture 1 times of the original size Twice Enlarge the picture 2 times of the original size 3 times Enlarge the picture 3 times of the original size 4 times Picture is returned to original size 11. IRT ON/OFF Button** – Press this button to turn the selected unit IR Transmitter ON/OFF. 12.
18. AUDIO Button – Press to display and select the AUDIO language in DVD mode. Each time you press the button, the language changes. NOTE: The languages for audio vary from disc to disc. 19. SCAN FORWARD (8) Button – Press to search in a forward direction. Press repeatedly to change the search speed from 2, 4, 8 and 20 times the normal speed. 20. STOP () Button* – Press to stop playback. 21. PAUSE (II) Button – Allows the user to pause the playback. Press the Play button to resume normal playback. 22.
SETTINGS AND ADJUSTMENTS (M1 ONLY) The Setup Menu contains features and options that let you customize your DVD player. For example, you can set a language for the onscreen display or prevent DVD playback for children. Using the Setup Menu 1. Press the SETUP button on the remote. The Setup Menu appears on the screen as shown per diagram. Language OSD Language : English Video Subtitle : Off Rating Audio : English Misc 2.
LANGUAGE SETUP Language OSD Language Video Subtitle Language for On-Screen Display Rating Audio OSD MENU: The OSD MENU setup allows you to select the language for the on-screen display. The user can either select English, French, Spanish, German or Italian for the OSD language. Misc SUBTITLE SETUP English French Spanish German Italian Language OSD Language Video Subtitle Rating Audio English French Select "SUBTITLE" using pq button, then press u button to enter the Submenu.
TV Type The TV TYPE setup allows you to select the system to fit to the color system of the TV to be connected. NTSC - Select this type for NTSC TV PAL - Select this type for PAL TV Multi - Select this type for multi-system TV RATING SETUP Rating This item allows you to limit the content of movie playback from G to Adult. The lower the value, the more strict the control. G Language Parental : 6.
Language Load Factory Load Factory allows you to reset all options to factory settings. * This function will not affect the Rating control settings. Load Factory Load Factory Video Screen Saver Yes No Rating Misc Screen Saver ON -Screen saver will appear OFF -Screen saver will not appear Language Video Note: The DVD player will enable the Screen Saver mode if the unit is inactive for approximately 3 minutes. Rating Load Factory Screen Saver Off On Misc Playing DVDs 1.
Playing MP3 Discs MP3 is a format for storing digital audio. An audio CD-quality song can be compressed into the MP3 format with very little loss of quality, while taking up much less space. CD-R discs that have been encoded in MP3 format can be played on your DVD player. The DVD player plays the songs in the order they were burned on to the disc. When playback is started the elapsed time of the track that is playing will be displayed.
Flat Mode: play the entire disc 1/12 This mode is always on (default). During the Flat Mode all the data folders with MP3, JPEG & movies will be played in sequence. If the Flat Mode function is off, it will only play the selected folder; other folders are disabled. / TRACK01 TRACK02 Flat Mode Repeat : Off Mode Normal : TRACK03 TRACK04 TRACK05 Music Playing TRACK06 Repeat: play repetitively 1/12 Repeat function has 4 options: Off, Single, Folder, All.
Edit Mode Program View Add to Program 1/12 / TRACK01 Notice: Edit Mode/Program View/Add to program functions are all related and can not be implemented during play mode or any other program function. Edit Mode TRACK02 Program View TRACK03 Add to Program TRACK04 TRACK05 Music Playing TRACK06 Album:------------ Method: Make sure disc playback is off. Move cursor to Edit Mode function and press OK. After Edit Mode is selected, open the folder and select the songs which will be compiled.
DVD Basics To get the optimum use out of the DVD section, make sure you read this section completely. Regional Coding Both the DVD player and DVDs are coded by region. These regional codes must match in order for the disc to play. If the codes don’t match, the disc won’t play. This unit’s code is region 1. Other regional codes cannot be played in this unit. The unit will display “WRONG REGION”. Types of Discs your DVD will play •DVD* disc - DVD discs which contain video.
Audio / Video Inputs and Outputs Audio Output The Audio output will provide the Audio signal from the MMD7HRM unit. This output can be connected to your car Audio input or a wired FM Modulator (Audiovox FMM100A) Source Feature MMD7HRM Sources: DVD & AUX DVD - Select DVD to view the internal DVD player. AUX - Select AUX to view the source that is connected to the AUX input* on the front of the unit. MMD7HRS Sources: AV1 & AUX AV1 - Select AV1 to view the DVD player from the MMD7HRM monitor.
TROUBLESHOOTING SOLUTION PROBLEM IR sensor inoperative Verify that the batteries in the remote are fresh. Verify that the remote sensor eye is not obstructed. Verify that Master Monitor or Satellite Monitor has been selected correctly. Disc won't play Check the type of disc you put into disc tray. This DVD only plays DVDs, audio CDs and MP3s. Both the unit and the disc are coded by region. If the regional codes don’t match, the disc can’t be played.
CAUTION 1. 2. 3. 4. Keep the monitor clean and dry. Always seek qualified personnel to perform repairs. Never attempt your own repairs. Do not drop the monitor or expose to strong impacts. Do not expose to direct sunlight for extended periods of time. MONITOR SPECIFICATIONS 1. Type : TFT Active Matrix LCD 2. Resolution : 1440 (W) x 234 (H) 3. Pixels : 336,960 4. Back Light : Edge Light Tube 5. Power Source : +12 VDC 6. Power Consumption : 26W 7.
12 MONTH LIMITED WARRANTY Applies to Movies To Go Mobile Video Products AUDIOVOX ELECTRONICS CORP. (the Company) warrants to the original retail purchaser of this product that should this product or any part thereof, under normal use and conditions, be proven defective in material or workmanship within 12 months from the date of original purchase, such defect(s) will be repaired or replaced with reconditioned product (at the Company's option) without charge for parts and repair labor.
For Customer Service Visit Our Website At WWW.audiovox.com Product Information, Photos, FAQ’s Owner’s Manuals © 2007 Audiovox Electronics Corp.
