User's Manual

1) Connect the Power Harness to the mating connector on the Video Monitor.

2) Connect the Power Harness to the electrical system through an In-Line

5-Ampere fuse by tapping into an accessory hot line. Also connect the Black

wire to a good chassis ground.

3) Connect the AV input cable to the AV Source output equipment ( VCD, Game, DVD Player etc)

4) Connect the AV output cable to other AV Source input equipment.

5) Verify all functions of the system before final mounting of the finished assembly.

vehicle's

WIRING DIAGRAM

Dome Light Harness

Red/Black

(Lamp On)

Black/Red

(Lamp Common)

Violet/Brown

(Lamp Auto)

Black: Ground

Power Harness

Red: +12VDC Accessory Ckt.

(Install 5A inline Fuse)

Line Out-R (Red)

Line Out-L (White)

Line Out-V (Yellow)

Line In-R (Red)

Line In-V (Yellow)

Line In-L (White)

AV Output Cable

AV Input Cable