Model Number MM170R 17.
S-VIDEO IR transmitter + Video input (yellow) 12V - VGA FUSE 2A BATTERY Wiring Diagram FEATURES: High Resolution 17.1" Active Matrix 16:9 Display Resolution: 1440 x 900 Source Of Signal: CVBS, SVIDEO VGA Power Supply:DC0.8V~13.8V Power Consumption:15W Video System: NTSC/PAL Dimensions: 17 x 10 x .79inch (431.8 X 254 X200.6mm) On Screen Display (OSD) Functions: Press the MENU button on the Remote Control. Brightness, Saturation, Contrast, Hue and Reset will appear. 1.
. Press "w " to enter the desired submenu. Press "v " or "w " to access each of the adjustments. Press to adjust, then press "w " again to exit. Then press SETUP to exit main menu. Return Brig htness Contrast Saturatio n Hue 53 50 50 50 USER MENU Sele ct - + Move Using the remote control press the arrow button on the right to increase the adjustment or the arrow button on the left to decrease the adjustment. The brightness, contrast, saturation and hue can be adjusted from -50 to +50.
Troubleshooting Symptom Unit does not turn on No picture Cause 1.Check if the power cable is properly connected. 2.Use remote control to turn the unit on. Check if the battery in the remote control is installed correctly. 3. Make sure the battery is not discharged. 1. Check if the source video is operational. 2. Check the input source setting. 3. Check that the Vertical Scanning Frequency of the VGA input is OK. Picture appears 1. Check if the source video is operational. 2.
