DOWN PREV 128-6197 UP ON/OFF NEXT Manual User’s MP3 PLAYER Model : MP1164
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesirable operation. Warning: Change or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Introduction The Audiovox MP3 is a personal, compact, non-mechanical player designed for clear, skip-free digital audio playback. Download MP3 files from your PC hard drive into the player via USB Port, cable included. Its On-board flash memory and optional 128 Megabyte Smart Media Card, lets you enjoy CD quality music, for up to 6 hours. The single “AA” Alkaline battery lasts approximately ten hours.
2. Accessories Included • • • • Earphones USB Cable Carry case with belt clip MP3 Manager Software 3. Connecting Player to your PC 1) Connect one end (mini plug) of data transfer cable to the connector slot located on the left side of Player. 2) Insert the opposite end of USB cable into the USB port of your PC. Note : Please be sure to smoothly remove cable from Player by pushing on side buttons of connector. Otherwise, it may cause a malfunction. 4.
Installing Software on your PC 1. System Requirements 1) Windows 98/ME/2000 2) CD ROM Drive 3) Pentium 100MHz or faster 4) 32MB of RAM or Greater 5) Minimum 10MB Hard Disc Space 6) 1 available USB Port, V1.1 7) Sound Card Note: Some computer systems using VIA chip main board, may not support USB port properly. Please read the user manual of your computer. 2. Installing USB DriverProcedure After connecting the MP3 Player to your computer, install the MP3 Player software (USB driver) from the CD-ROM.
3. When the Add New Hardware Wizard dialog box appears, insert the MP3 Player software CD in the CD-ROM drive, then click “Next >”. 4. Select the “Search for the best driver for you device” option (for Windows 98) or the “Search for a suitable drive for my device” option (for Windows 2000), then click “Next >”.
5. Select the CD-ROM drive, then click “Next >”. 6. Follow the instructions on the screen. For Windows 2000 users: When the following dialog box appears, click “Yes” to continue. Note: If you click “No” and stop installation, your MP3 Player will appear under Human Interface Devices with a question (!) mark in the Device Manager menu. You must reinstall MP3 Player driver.
7. Windows system has found the driver, then click “Next >” to install MP3 Player driver. 8. When a dialog box similar to the one shown below appears, click “Finish”. Note: If necessary, restart your computer.
3. Installing MP3 MANAGER Downloading Software 1) Turn on your computer 2) Insert Install CD disc into CD ROM, run CD ROM Drive with “setup exe.” by double clicking on “My Computer” followed by clicking on the CD ROM drive. 3) Follow the instructions on the screen. 4) Click “Next >” 5) Click “Next >” if destination is correct.
6) Click “Next >” 7) Select “Yes, launch the program file” then click “Finish”. NOTE: You may have to reboot your computer before launching the MP3 manager. 8) When Installation is complete, the “MP3 Manager” icon will be on your desktop.
THE DOWNLOADER PROGRAM Using the MP3 Manager The MP3 Manager is used to manage the files on your MP-1164. Use this program to transfer files back and forth between your PC and your MP-1164, change the order of songs on your MP-1164, and format the onboard and/or SMC memory.
If an error message appears stating “MP3 Player Not Detected on USB Port” please check the following: 1) The unit is properly connected to the USB Port through the supplied accessory cable. 2) The unit is powered on (press the Play button ( ) on the MP-1164.“ 3) The MP-1164 is in normal mode (not Shuffle or Intro). MP3 MANAGER Explorer Window: This window indicates the directory where your MP3 files are stored.
Changing the order of files on the MP-1164: 1) Select the file you wish to re-order from the built-in memory or SMC window. 2) Click, hold, and drag the file to its new position. Let go of the mouse button. 3) Your selected file should now be in its new position. 4) This may also be done by selecting the song and clicking on the uplist and downlist icons. Deleting Files: 1) Select the file you wish to delete from either File List Window. 2) Click the Trash icon on toolbar to delete it.
Refomatting the MP-1164 : Due to normal usage, some portions of space are lost in the Built-in and SMC memory of your MP-1164. Use the format icon (deletes ALL data on the MP-1164) from time to time as a maintenance measure to reclaim all free space on your unit. Note: 1) When “Formatting”, all contents within Built-in Memory and SMC card will be erased. 2) It is recommended to use”L-Format Memory” and ”L-Format Card” under Action Tab for first time to use this player or each time a new battery is replaced.
Volume Control (—)/ Menu Setting Down button (4) Volume Control (+) / Menu Setting Up button (5) Perforation LCD Readout Card Slot Cover Lock Smart Media Card Cover Earphone Jack Mode Button (4) M DOWN PREV Skip Down / Prev Menu Button (2) UP ON/OFF HOLD PC Interface Hold Switch Smart Media Card Latch NEXT Power On/Off Play/Pause/Stop Button (1) Skip Up / Next Menu Button (3) Battery Cover Lock Battery Cover Player Operation 1.
Skip Up, Skip Down: Press button (2) or (3) to skip tracks forward or backward. Fast Search: During Play, press and hold button (2) or (3) to search within current track. Mode : Press button (4) once to display one of the following menus Pressing button (2) or (3) can change the menu display : 1. MODE SET 2. BASS SET 3. TRBL SET 4. LCD SET 5. MEM VIEW 6. SMC VIEW 7. BAT VIEW You may customize your setting in each menu (except #5, #6 & 7 by pressing (4) and (5). See menu options below. 1.
HOLD switch When HOLD switch is ON, all button functions will be deactivated. “KEY HOLD” and “Good Bye” will show on the display, then the unit will automatically power down. The MP-1164 cannot be powered on when the Hold switch is on. To insert Smart Media Card (SMC) Unlock the SMC cover, remove the SMC Cover located on the top side of Player by applying slightly thumb pressure while sliding it outward. Insert SMC into slot according to the indicated direction. Reattach the SMC cover and lock it.
