User Guide

CD4. Re-Install faceplate taking care not to pinch wiring from the CD
Module chassis. Press the faceplate on the lower bottom center to seat
the 18-pin connector before tightening escutcheon screws. Replace
endcaps.
INSTALLATION OF THE CASSETTE MODULE (NGMMC2)
MC1. For installation of the Nextgen Cassette Module, follow steps 1-3
on page 4. Insert the Cassette Module in the Nextgen chassis until
it clicks into place.
MC2. Connect the 14-pin connector from the Cassette Module to the
Nextgen chassis on the bottom left corner 14-pin socket.
12