User Guide

CAUTION: The rear of the radio must be supported with the strap to
prevent damage to the dashboard from the weight of the
radio or improper operation due to vibration.
INSTALLATION USING KITS
1. If your radio requires the use of an installation kit to mount this radio,
follow the instructions included in the kit to attach the radio to the
mounting plate supplied with the kit.
2. Wire and test the radio as described in step 3 on page 2.
3. Install the radio/mounting plate assembly to the sub-dash according
to the instructions of the installation kit.
4. Attach the support strap to the radio and dashboard as described in
step 6 on page 2.
5. Replace the dashboard trim panel.
MOUNTING
SURFACE
MOUNTING
SLEEVE
BEND TABS
BOTTOM TAB
BEND DOWNWARD 90°
MOUNTING TAB DETAILS
CUTAWAY VIEW OF
MOUNTING SURFACE
SIDE VIEW
TOP TAB BEND
UPWARD 90°
3