User Guide

CONFIGURATION- con’t.

CONFIGURATION OF TUNER SEEK SENSIVITY SETTING

The scan sensitivity feature is designed to give flexibility during the tuner

seek function. The tuner can be configured such that during seek, it will

stop on strong stations, ignoring weaker signals. The tuner can also be

configured to stop at all weak signals.

To configure the seek sensitivity setting, hold down the AUDIO ADJUST

button for longer than 3 seconds. The unit will then enter the general

configuration menu. While in the general configuration menu, press

preset 4 and then preset 2. The unit is now in the tuner configuration

menu. Press the manual “tune down/track down” button until you see

“SC--**” on the display (where ** can equal 00-15). The numbers are set

such that at the setting “SC-00”, the unit is more sensitive to weaker

signals. This means that the seek function will stop at most or all weak

signals. At “SC-15”, the seek function will stop only at the strong

stations. Use the manual “tune up/track forward” button to adjust the

seek sensitivity of the tuner to a setting that will suit the application. To

exit the tuner configuration menu, press AUDIO ADJUST or let the menu

timeout, within about 5 seconds. For reference the factory setting is 08.

CONFIGURATION OF THE MECHANICAL CASSETTE MODULE

Hold down the AUDIO ADJUST button for longer than 3 seconds. The

unit will enter the general configuration menu. Press manual “tune

down/track down” button until you see “IN--**”. For logic cassette, scroll

through the menu options until “IN--**” (where ** can equal NA, LT, CD,

or CG) is displayed. For proper mechanical cassette operation, this

setting should be set to “IN-NA”. If this button setting is not “IN-NA”,

press the manual “tune up/track forward” button until this appears on the

display. To exit configuration, press the AUDIO ADJUST or let the menu

timeout, within about 5 seconds.