P-48 HIGH POWER DETACHABLE FACE ELECTRONICALLY-TUNED AM/FM/MPX RADIO WITH AUTO-REVERSE CASSETTE PLAYER, CD CHANGER CONTROLS AND QUARTZ CLOCK OWNER'S MA NUAL
INDEX Page Operating Instructions..................................................................... 1 - 6 Notes on Use of Front Panel .......................................................... 7 Setting the Clock ............................................................................. 7 Specifications .................................................................................. 8 Care and Maintenance .................................................................... 9 Warranty ...............
OPERATING INSTRUCTIONS 1 ON-OFF POWER BUTTON Press this button to turn the unit on or off. 2 VOLUME/LEVEL CONTROL To increase the volume level, press the side of the control. The volume will increase and the level will be shown on the display panel from a minimum of 0 to a maximum of 15. To increase the volume quickly, keep the button pressed. To decrease the volume level, press the side of the control. Keep the button pressed to decrease the volume quickly.
5 TREBLE CONTROL To adjust the treble level, first select the Treble mode by pressing 3 the Select button so the TRE indication appears on the display panel. Within 5 seconds of choosing the Treble mode, press the or side of the Level control to adjust the treble response as desired. The level will be shown on the display panel from a minimum of -10 to a maximum of 10 (0 indicates flat response).
Tuning ( ) button to tune downward. Pressing either button for longer than 0.5 seconds will cause the radio to tune rapidly in the selected direction until the next station is encountered. AUTOMATIC SEEK TUNING (SEEK) During radio operation, this function is used to search for stations automatically. By pressing the button, the radio will seek the next station and stop at that frequency. The Seek function can be stopped by pressing the button again or activating any other tuning function.
cm PROGRAM SELECTOR 4. Repeat the above procedure for the remaining 5 pre-sets on To manually reverse tape direction and play the other side that band and for the other 4 bands on the unit. (program) of the cassette, lightly push both the Fast-Forward and LIQUID CRYSTAL DISPLAY PANEL and at the same time. The change of The Liquid Crystal Display (LCD) panel displays the frequency, Rewind buttons direction will be shown by the arrows on the display panel. time, and activated functions.
panel. Pressing the Time/Frequency Selector button when the so that the left side of the panel is released. Grasp the released radio frequency, tape or CD changer indication is shown will side and pull it off of the chassis. To re-attach the panel, position change the display to show the time.
magazine was already in the changer, play will resume from the track on the disc previously in play. & DISC SELECT (CD+ & CD-) These buttons are used to select the desired disc play. To advance to a higher number disc, press the CD+ button . To return to a lower number disc, press the CD- button . The number of the disc in play will be shown on the display panel. TRACK SELECT, CUE/REVIEW ( / ) This button is used to quickly select the beginning of a particular track.
NOTES ON USE OF FRONT PANEL 1. Make sure the front panel is right-side-up when attaching it to the chassis as it cannot be attached when up-side down. 2. Do not press very hard on the front panel when attaching it to the chassis. No more than light to moderate pressure should be needed. 3. When attaching the front panel, make sure the right side is correctly engaged before pressing the left side to lock it into position. 4.
SPECIFICATIONS: Size: 7" W x 2" H x 6-1/8" D 178mm x 50mm x 155mm Operating Voltage: 12 volts DC, negative ground Output Power: 100 watts maximum (25 watts x 4 channels) Output Wiring: Floating-ground type designed for 4 speaker use. The amplifiers in this unit are NOT designed for use with 2 speakers Output Impedance: Compatible with 4-8 ohm speakers Tuning Range: AM: 530 - 1,710 KHz. (10 KHz. step) FM: 87.5 - 107.9 MHz. (200 KHz. step) Sensitivity: AM: 20 uv FM: 1.
CARE AND MAINTENANCE The radio portion of your new sound system does not require any maintenance. We recommend you keep this manual for future reference of the many features found in this unit. As with any cassette player, the cassette section of this sound system does require a minimum of maintenance to keep it in good working condition. The following simple care and maintenance suggestions should be followed to prevent malfunctions of the cassette system. CASSETTE CARE: 1.
MONTH LIMITED WARRANTY Applies to automotive radios, radio/tape players, radio/CD players, CD changers, power amplifiers, equalizers and accessories.
