MCI-3300.(03 00.8.22 5:04 PM 페이지1 Dual Mode Digital CDMA Telephone MCI-3300 Owner’ s Manual 555 Wireless Blvd., Hauppauge, NY 11788 631-233-3300 ● http://www.audiovox.com REV.
MCI3300-02/10 00.8.
MCI3300-02/10 00.8.
MCI3300-02/10 00.8.22 5:32 PM 페이지5 1 PRECAUTIONS Chapter 1 Fully charge battery before use. Before Using Your Phone Do not use in high-temperature or high-humidity environments. Do not expose the handset to rain or spilled beverages. Please read this chapter before using this product.
MCI3300-02/10 00.8.22 5:32 PM 페이지7 PACKAGE CONTENTS 1 HANDSET FUNCTIONS Thank you for your purchasing Audiovox CDMA cellular phone. Please check the product contents by comparing them with the following pictures. Handset ● Folder Cover ● Ear-microphone Jack Key lock is enabled when the folder cover is closed (however, key lock is disabled when receiving a call). ● Volume Button Used to adjust earpiece volume, key tone volume and handsfree volume.
MCI3300-02/10 00.8.22 5:32 PM 페이지9 HANDSET FUNCTIONS 1 SCREEN DISPLAY AND FUNCTIONS Function Buttons This button is used to access the menu. This button is used to make or receive a call Press this button to terminate a call or exit the current menu. Press and hold to turn the phone on or off. This button is used to clear digits and /or texts from the display or exit the current menu. Signal Strength The strength of the current signal is displayed by the number of bars (0-5).
MCI3300-02/10 00.8.22 5:32 PM 페이지11 1 BATTERY INSERTION AND DETACHMENT CHARGING THE BATTERY Battery Insertion Method •The battery is not charged when you purchase the product. Use the battery only after it is fully charged. •Charge your battery when the battery low-voltage alarm sounds. 1 As shown in picture ①, insert the battery to fit into the groove at the bottom of the handset. Then press in the direction of ② until it snaps.
MCI3300-02/10 00.8.22 5:32 PM 페이지13 CHARGING THE BATTERY 4 TIPS ON EFFECTIVE BATTERY USE Charging Completion Charging is completed when the green-colored light stays on. •The handset may remain in the charger after the green light is turned on. •Charge the battery when the battery low-voltage alarm sounds from the handset and the“Very Low Battery!”message appears on the screen. •When the“Low Battery Warning! Phone is Turning OFF!” message appears on the screen the handset will turn off automatically.
MCI3300-02/10 00.8.22 5:32 PM 페이지15 2 BASIC OPERATION How to Turn the Handset On 1 Hold down until for 2 seconds. MCI WORLDCOM XXX-XXX-XXXX Chapter 2 Basic Operation MCI WORLDCOM Jan 20, Wed 4:03pm This chapter describes the basic operation of the handset. Basic Operation How to Adjust Volume Ringer/Vibration/Light selection Ringer Type Selection •If the phone is in Auto Lock mode the“Lockcode?”message will appear on the screen. You must enter the 4-digit lock code to use the phone.
MCI3300-02/10 00.8.22 5:32 PM 페이지17 BASIC OPERATION How to Make a Call 1 Area Code Press How to Answer a Call 1 213555-5262 Start the conversation after the call is connected. Phone rings and the green and red LED on the folder cover flash. Incoming Call •To change receiver type (Ringer/Vibration/Ringer + Vibration/Lamp), please refer to p 22. Initial setting is “Ringer” . . •If the line is busy, terminate the call, wait for a moment, then try again.
MCI3300-02/10 00.8.22 5:32 PM 페이지19 BASIC OPERATION HOW TO ADJUST VOLUME Recalling Last Number Dialed Using the Volume Button This feature is used to dial the number just called. 1 2 Press and the phone number you just dialed or the number most recently saved will dial automatically. If you are using ear-microphone, press the ear-microphone button for more than 2 second.
MCI3300-02/10 00.8.22 5:32 PM 페이지21 RINGER /VIBRATION/LIGHT SELECTION This feature is used to select ringer, vibration or Lamp. 1 Press ② This feature is used to select ringer type. ①. Receive Type Ringer [ 2 3 22 ] 1 Press ② ②. Ringer Select Bell 1 [ [END] Use the scroll buttons to select the receiver type you want. 2 Use the scroll buttons to select ringer type.
MCI3300-02/10 00.8.22 5:33 PM 페이지23 ADJUSTING RINGER VOLUME 2 AUTO ANSWERING The call is connected automatically after ringing a set number of times. This Feature is Used to Adjust Ringer Volume or 1 Press ② ③. Ringer Volume To move between the menu items, use the scroll buttons [ / ] or the volume buttons. 2 Adjust the volume by pressing the volume buttons or the scroll buttons, then press to store the setting. [ ] 1 Press ② ④.
MCI3300-02/10 00.8.22 5:33 PM 페이지25 FLIP ANSWER MEMO 2 This feature allows you to choose whether you want to receive a call by opening the folder. This is particularly useful if you want to see the Caller ID before answering calls. 1 Press ② ⑤. Flip Answer? Yes [ 2 ] [END] Use the scroll button to select the desired setting. •Yes : Allows you to receive calls by opening the folder. •No : Does not allow you to receive calls by opening the folder.
MCI3300-02/10 00.8.22 5:33 PM 페이지27 3 HOW TO STORE A PHONE NUMBER Up to 100 phone numbers can be stored in the memory and retrieved by using a variety of ways. Location Number (2-digit) Phone Number Chapter 3 1 Memory Functions or Location Name Enter the phone number you wish to store and press . •The first available location is automatically displayed.
MCI3300-02/10 00.8.22 5:33 PM 페이지29 HOW TO STORE A PHONE NUMBER Entering Letters and Numbers One-Touch Dialing This feature allows you to make a call with phone numbers stored in the memory location 0 to 9 without having to press the [SEND] key. Press the numeric keypad to select the letter.
MCI3300-02/10 00.8.22 5:33 PM 페이지31 HOW TO MAKE A CALL USING A STORED PHONE NUMBER HOW TO MAKE A CALL USING A STORED PHONE NUMBER List of Last Calls Recalling by Memory Location Number 3 Memory Location 1 Press ① ①. •Ten last calls can be seen. 1) Call To : Displays date and time of the outgoing calls. 2) Called By : Displays date and time of received calls. 3) Missed : Displays date and time of missed calls. ※ The number displayed at the bottom is the caller ID in 2) and 3).
MCI3300-02/10 00.8.22 5:33 PM 페이지33 HOW TO MAKE A CALL USING A STORED PHONE NUMBER HOW TO MAKE A CALL USING A STORED PHONE NUMBER Recalling by Phone Number Recalling by Name Phone Number 1 Press ① Name ③. 3 Enter the phone number (or part of the number) you wish to find. Press . Use the scroll buttons to find the phone number you desire. •[ ] goes to the next number and, [ ] goes to the previous number. •The first available location containing the entered numbers is displayed.
MCI3300-02/10 00.8.22 5:33 PM 페이지35 SCHEDULE MANAGEMENT Setting the Schedule 1 Press ② Up to 10 schedules can be set. Checking and Deleting Schedule ②. 1999.6 Su Mo tu We Th Fr 1 2 3 4 5 6 7 8 9 10 1 11 2 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 •The calendar is displayed. Move to the date you desire then, press [ ]. •The date selected is displayed inverted .
MCI3300-02/10 00.8.22 5:33 PM 페이지37 ALARM CALL ELECTRONIC CALCULATOR Editing the Alarm Call Calculator 1 Press ③. Alarm Call Set Off [ 2 ] Use the scroll buttons to select the desired setting, then press . Enter the desired time, then press Once Daily •Enter the desired date and time in the order, mm/dd/year and hr:min. 4 - Set Time 00:00 •Enter the desired time in the order, hr:min. -CALCULATOR- Using the calculator. •Definitions +:[ ], — : [ ], X : [ ], /:[ ], = : [ ], .
MCI3300-02/10 00.8.22 5:33 PM 페이지39 USING THE MENU 1 Press and use the numeric keypad to choose the desired menu item. •Use the scroll buttons [ / ] or the volume buttons to move between the menu items. Chapter 4 Convenient Functions 2 Using the Menu 4 To go back to the previous menu, press . . Menu Structure How to Adjust the Screen Verifying Call Time Alert Function Security Information Features Used While Call is Connected •If there are sub menu items, The sub menu is displayed on the screen.
MCI3300-02/10 00.8.22 5:33 PM 페이지41 MENU STRUCTURE 1st Step 1. Display 2nd Step 3rd Step 1: Time Show Yes/ No 2: Back Light Off 4th Step 6: Phone Info 1: Phone Number 2: Phone Version 7: System 1: Force Call 2: Prefer System 1/2/4/6/8/10 4: LED Use Yes/No Ringer / Vib+Ringer Ring Home Sys only ■■■□□□□ 1: Receive Type 0: Security /Vibration / Lamp 2: Select Ring Melody 1 / 2 / 3 / 4 / 5 / 6 / 7 3. Timer 1: Auto Lock 2: Set Lock No.
MCI3300-02/10 00.8.22 5:33 PM 페이지43 HOW TO ADJUST THE SCREEN 4 HOW TO ADJUST THE SCREEN Current Date and Time Display Backlight Function This feature allows you to adjust the time the backlight stays on, enabling easy access to the handset in a dark place. 1 Press ① ①. Show time? Yes [ 2 Use the scroll buttons to select the desired value. •Yes : Displays the current time. •No : Does not display the current time. ] 1 Press ① ②.
MCI3300-02/10 00.8.22 5:34 PM 페이지45 HOW TO ADJUST THE SCREEN HOW TO ADJUST THE SCREEN LCD Contrast Adjustment LED Use Selection 1 Press ① ③. LED Contrast 1 Press ① ④. LED Use? Yes ■■■□□□□ [ 2 Use the scroll buttons to select the desired level. ] [ [END] 2 Press . 3 46 ] [END] Use the scroll buttons to select the desired value.
MCI3300-02/10 00.8.22 5:34 PM 페이지47 VERIFYING CALL TIMERS Verification of All Calls 1 Press ③ Time Alert An alert beeps every minute letting the user know how much time has elapsed during a call. ①. •Lists all outgoing calls. •Can not be reset or clear at Memory Erase 4 ALERT FUNCTION XXX XXX XX XX Calls Hours Minutes Seconds 1 Press ④ ①. Time Alert? No [ Verification of the Last Call 1 Press ③ 2 ②. •Displays the duration of the most recent call.
MCI3300-02/10 00.8.22 5:34 PM 페이지49 ALERT FUNCTION 4 SECURITY INFORMATION Area Alert Automatic Lock An alert beeps and a message is displayed when the phone goes into a new service area, goes into a service area provided by an another system provider or goes out of a service area. This feature is used to protect the phone from unauthorized users. However, calls can be received and emergency calls can be made. Lock Code 1 Press ④ 1 ②. ] Lockcode? ---[END] 2 3 There are three kind of messages.
MCI3300-02/10 00.8.22 5:34 PM 페이지51 SECURITY INFORMATION Lock Code Change Greeting Change This feature allows you to change the 4-digit lock code to unlock the phone. Lock Code 1 Press 4 SECURITY INFORMATION This feature allows you to change the greeting message displayed on the screen. Up to 16 characters can be entered. Lock Code New Lock Code 1 . Press . Lockcode? Lockcode? ---- 2 Enter the 4-digit lock code. •The initial lock code at the time of purchase is“0000” .
MCI3300-02/10 00.8.22 5:34 PM 페이지53 SECURITY INFORMATION Call Restriction Call Restriction This feature restricts the use of the handset in three ways. Restricting incoming calls Lock Code 1 Press This feature restricts incoming calls. 1 . Press ① for“Incoming” . Incoming? Allow Lockcode? [ ---- 2 2 Enter the 4-digit lock code. •The initial lock code at the time of purchase i“0 s 000” . 1: 2: 3: 4: Auto Lock Set Lock No.
MCI3300-02/10 00.8.22 5:34 PM 페이지55 SECURITY INFORMATION SECURITY INFORMATION Call Restriction (Can’t) Clearing Memory This feature allows you to delete the call history, call time, and phone numbers stored in the memory. Restricting Stored Phone Numbers Lock Code This feature restricts calls stored in the memory. 1 Press ③ for“Use Memory” . Use Memory? Allow [ 2 ] [END] 1 Press 2 Enter the 4-digit lock code. Press . . •The initial lock code at the time of purchase i“0 s 000” .
MCI3300-02/10 00.8.22 5:34 PM 페이지57 SECURITY INFORMATION SECURITY INFORMATION Clearing Memory Clearing Memory Clearing Last Calls Clearing Roam Time This feature deletes the call history. 1 Press ② for“Clr Dialed” . 2 Use the scroll buttons to select the desired setting. •Yes : Deletes the call history. •No : Does not delete the call history. 3 Press 4 This feature allows you to delete total roaming time. Clr Dial No.? No [ ] 1 Press ④ for“Clr Roam Tm” .
MCI3300-02/10 00.8.22 5:34 PM 페이지59 SECURITY INFORMATION SECURITY INFORMATION Reset Phone Voice Privacy Mode Selection 4 This feature allows you to reset phone to factory default setting. Lock Code 1 Press 2 Enter the 4-digit lock code. Lock Code . •The initial lock code at the time of purchase is“0000” . 1 Press 2 Enter the 4-digit lock code. •The initial lock code at the time of purchase is“0000” . Lockcode? ----- 3 Press ⑥ for“Reset Phone” . .
MCI3300-02/10 00.8.22 5:35 PM 페이지61 FEATURES USED WHILE CALL IS CONNECTED Caller Number Sending Call in progress Used to silence Audible Tones In Standby And Mute Conversation. 1 Press ① when requested for your number. Self Number Check Press ④ or Press the call is in progress. •To cancel •To move between the menu items, use the scroll buttons [ / ] or the volume buttons.
MCI3300-02/10 00.8.22 5:35 PM 페이지63 FEATURES USED WHILE CALL IS CONNECTED Phone Number Link Dialing Inserting a Hyphen This feature is useful for Voice Mail provided by banks or paging. Enter the pause(P) character after a combination of numbers and the numbers. Numbers entered after the pause character will only be sent if the [SEND] key is pressed again. 1 Enter the phone number. Phone Number This feature allows you to insert hyphens in the phone number. 1 Enter the phone number.
MCI3300-02/10 00.8.22 5:35 PM 페이지65 PHONE INFORMATION 4 SYSTEM SELECTION FEATURE Self Number Check Force Call This feature allows you to check your phone number. This feature allows you to make a call in the analog mode only. The phone returns to the normal mode when the call is ended or 10 minutes after setting this feature. 1 Press ⑥ 1 ①. CDMA Press ⑦ ①.
MCI3300-02/10 00.8.22 5:35 PM 페이지67 5 SHORT MESSAGE SERVICE(SMS) This feature allows you to check text or voice messages. Message Reception Chapter 5 Supplementary Functions Text Message Upon reception of a text message, the message shown on the right is displayed on the screen with icon.
MCI3300-02/10 00.8.22 5:35 PM 페이지69 SHORT MESSAGE SERVICE(SMS) Checking Received Messages 1 Press Text Message 1 Press NEW MESSAGES 12 VOICE 3 TEXT [VOICE*] [TEXT#] 1 Use the scroll buttons + to select the message that you want to check. •The message scrolls up automatically. •Use the scroll buttons [ / ] or the volume buttons to scroll up or down the whole message. •To delete a message, press [ ], then choose between YES/NO. N 01: LET’S MEET 02: I LOVE H.
MCI3300-02/10 00.8.22 5:35 PM 페이지71 CHECKING BIORHYTHM 5 CHECKING BIORHYTHM This feature allows you to check the biorhythm for today or a specific day by using your birthday. Vital period Dangerous Day 1 2 Press ⑤ ①. 1: Today 2: Other Day 3: Birthday Press ③ for“Birthday” . •Enter the year/month/day, then press [ 3 ]. To check today’ s biorhythm press 1. To check the biorhythm of a specific day, press 2.
MCI3300-02/10 00.8.22 5:35 PM 페이지73 STOPWATCH WORLD TIME DISPLAY Stopwatch World Time Display 1 Press ⑤ 1 ②. - Stopwatch - Use the volume buttons stopwatch. to start the •Volume Up key [ ] : Start/Stop/Split Control. •Volume Down key [ ] : Reset. •The time is displayed at a resolution of 1/10th of a second. ⑤ ③. •The time of 36 cities in the world can be displayed. 0:00:00:0 □□□□□□□□□□ 2 Press 5 2 Use the scroll buttons to select the desired city, then press .
MCI3300-02/10 00.8.22 5:35 PM 페이지75 MEMO Etiquette Feature Appendix This feature is useful for places such as library or cinema. To enable 1 Press the Mute button. Etiquette Mode MCI WORLDCOM JAN 20, WED 4:03pm (Standby state) 00:00:09 -MuteXXX-XXX-XXXX (Call in progress) To disable 1 Press the Mute button. •The phone returns to the state before entering the etiquette mode. •Etiquette button can be used both in standby state or while a call is in progress. 1. Standby state.
MCI3300-02/10 00.8.22 5:35 PM 페이지77 OPTIONAL DEVICES Appendix Hands-Free Kit for Vehicles Hands-free kit allows you to use the phone while you are driving. Contents of the hands-free car-kit Appendix ◀ Mounting Stand ◀ Mounting Stand Base(including screws) Optional Devices ◀ Hands-free Box Summary Table of Functions ◀ Hands-free Box Base (including screws) ◀ Power Cable ▲ Hands-free Microphone •For more information, refer to the hands-free kit user manual.
MCI3300-02/10 00.8.
MCI3300-02/10 00.8.
