User`s manual

How to Answer a Call
BASIC OPERATION
2
1 9
BASIC OPERATION
1
Enter the phone number.
1 8
How to Make a Call
213-
555-5262
Area
Code
P h o n e
N u m b e r
󰦂 󰦂
To delete a wrong number, press [CLR] to
back up. To delete all entered digits, press
[END] or hold down [CLR].
2
Press 󰝕 󰝖.
•If the line is busy, terminate the call, wait
for a moment, then try again.
•T he“Call Failed”message will appear on
the screen if the call cannot be connected.
Calling...
213-555-5262
MCI WORLDCOM
Jan 20, Wed
4:03pm
3
Start the conversation after the call
is connected.
4
To end the call, close the phone or
press 󰝕 󰝖. If you are using the
ear-microphone, press the ear-
microphone button shortly.
•To dial the number you have just called, press [ ] .
If you are using the ear-microphone, press the ear-microphone button for more than
2 second.
•If is displayed, you are in an out-of-service area and cannot make a call.
1
Phone rings and the green and red
LED on the folder cover flash.
Incoming
Call
•To change receiver type
(Ringer/Vibration/Ringer + Vibration/Lamp),
please refer to p 22. Initial setting is“R i n g e r ”.
2
Open the folder or if the folder is
already open, press any key. except
[ ]key. If you are using ear-
microphone, press the ear-microphone
button for more than 2 seconds.
If you press button once in short, the
bell sound will stop, twice in short, the
function will be some on End
00:00:01
3
Start the conversation.
•Closing the folder while using the ear-microphone
does NOT end the call.
4
To end the call, close the folder or
press 󰝕 󰝖.
•If Auto Answering Feature is enabled, the call will be answered after the preset number
of rings. (refer to p 25)
00:00:01
213-
555-5262
MCI3300-02/10 00.8.22 5:32 PM 페이지17