User`s manual

CHARGING THE BATTERY
1
13
Battery Insertion Method
BATTERY INSERTION AND DETACHMENT
1
12
As shown in picture ①, insert the battery to fit into the
groove at the bottom of the handset.
Then press in the direction of ② until it snaps.
Battery Detachment Method
2
Push the handset separation tab ① with one hand and
pull in the direction of ② to separate.
•The battery is not charged when you purchase the product. Use the battery
only after it is fully charged.
•Charge your battery when the battery low-voltage alarm sounds.
1
Power Connection
Connect the charger to a standard
120V AC outlet.
L E D’s will blink orange when the
power is connected.
•Red indicates charging.
•Green indicates charging is complete.
2
Charging the Battery Only
To charge the battery only, insert
the battery pack into the charger.
LED will indicate charging status.
3
Charging the Battery with the
H a n d s e t
To charge the battery with the
handset, insert the handset into the
c h a r g e r .
•The battery must be correctly placed in the battery compartment. If the battery is
incorrectly inserted, the handset will not turn on or the battery may slip out.
•Battery is not charged when you purchase the product.
•Fully charge the battery before use.
•Charging the battery with the handset on is less efficient than charging it with the
handset off.
①
①
②
②
MCI3300-02/10 00.8.22 5:32 PM 페이지11