INSTALLATION MANUAL P-105 AM/FM/MPX RADIO WITH COMPACT DISC PLAYER, CD CHANGER CONTROLS AND QUARTZ CLOCK
INSTALLATION INSTRUCTIONS This unit is designed for installation in GM and Chrysler cars, trucks, and vans with a 1-1/2 DIN radio opening. In some cases, a special installation kit will be required to mount the radio to the dashboard. These kits are available at electronics supply stores and car stereo specialty shops. Always check the kit application before purchasing to make sure the kit works with your vehicle.
WIRING COLOR CODES FUNCTION COLOR + 12 V Acc/Ignition Red + 12 V Battery/Memory Yellow Ground Black Dimmer Orange LF + Speaker White LF - Speaker White/Black LR + Speaker Green LR - Speaker Green/Black RF + Speaker Gray RF - Speaker Gray/Black RR + Speaker Violet RR - Speaker Violet/Black TYPICAL GM APPLICATION (See Figure 1.) Radio Preparation: NOTE: For GM car installations, use the GM Hardware Kit, Part Number 150-1343, which is furnished with the radio. 1.
-4- P-105 WIRING HARNESS (SUPPLIED, ITEM #1) GM WIRING HARNESS ADAPTER (PURCHASE SEPARATELY) VEHICLE SIDE RADIO HARNESS VEHICLE DASH SHORT QUICKIE BOLT ITEM #2 (supplied) SPLICE WIRES SHORT QUICKIE BOLT ITEM # 2 FLANGE NUT (2 PLACES) ITEM #4 (2 PLACES) LONG QUICKIE BOLT ITEM #3 ANTENNA SOCKET BRACKET (2 PLACES) ITEM #6 FACTORY BRACKET RCA CABLES 14 PIN PWR/SPKR CONNECTOR VEHICLE OUTER DASH TRIM REAR BUSHING FACTORY RADIO OR CD CHANGER CONNECTOR REAR VIEW FLANGE NUT ITEM #4 EXISTING MOUNT
TYPICAL CHRYSLER APPLICATION (See Figure 2.) Radio Preparation: NOTE: For Chrysler car installations, use the Chrysler Hardware Kit, Part Number 150-1344, which is furnished with the radio. 1. Select two of the four mounting tabs provided and match the radio mounting style of the vehicle as shown in Figures 3, 4 and 5. NOTE: The tab number is stamped on the bottom of the tab. 2. Attach the mounting tabs to the radio chassis with the four small Phillips-head screws provided ( Item # 9). 3.
-6- CHRYSLER APPLICATION MOUNTING TABS AND HARDWARE (See Figures 3, 4 and 5) VEHICLE SIDE RADIO HARNESS CHRYSLER WIRING HARNESS ADAPTER (PURCHASED SEPARATELY) P-105 WIRING HARNESS VEHICLE DASH ANTENNA SOCKET EXISTING MOUNTING HARDWARE OR 10mm SCREWS P-105 RADIO SPLICE WIRES VEHICLE SIDE GROUNDING STRAP FLANGE NUT ITEM #4 (supplied) ANTENNA CABLE RCA CABLES 14 PIN PWR/SPKR CONNECTOR VEHICLE OUTER DASH TRIM LONG QUICKIE BOLT ITEM #3 CD CHANGER CONNECTOR REAR VIEW TYPICAL INSTALLATION FOR CHRY
TAB #2 TAB #1 Figure 3 TAB #2 TAB #4 Figure 4 TAB #3 TAB #2 Figure 5 -7-
© 2001 Audiovox Electronics Corp.
