Vehicle Alarm System Installation Manual
8
ÿþýüûúþ ýü ü þúÿ ú úþþ ÿú üþ þ ÿý ýüüþú
þÿ þ ÿ þ
þÿ ÿ
þ þ ÿ
ÿ
ÿ
ÿ ÿ ÿ ÿ
þ ÿ ÿ
ÿ þ ÿ ÿ ÿ
ÿ
þ þ ÿ ÿ ÿ
ÿ
ÿ þ ÿ ÿ ÿÿÿ
ÿÿÿ
þ ÿ ÿ
ÿþ
þ ÿ ÿ ÿ ÿ
ÿ
ÿ ÿ
ÿ ÿ ÿ ÿ
ÿþ þÿ
ÿ
ÿÿÿ
ÿþ
þÿ ÿÿÿÿ
ÿ ÿ ÿ ÿ ÿ
þ ÿ ÿ ÿ ÿÿ ÿ
ÿþ
þÿ ÿÿÿÿ
ÿþ
þÿ ÿÿÿÿ
COMPLETING THE INSTALLATION:
After you have confirmed the operation of the PRO 9842, and tested any and all optional features of the
system:
1. Mount the control module up and behind the dash securing it in place with cable ties or screws. Be
certain that the chosen mounting location will not inhibit any of the controls of the vehicle.
2. Securely harness and tie all wiring up and away from all hot and moving parts that they may come in
contact with under the dash board or in the engine compartment areas.
CAUTION: Particularly avoid the area around the steering shaft and column, as wires can wrap around
these mechanisms and impair the safe operation of the vehicle.
3. Check the vehicle's wipers, lights, horn, etc... to insure proper operation.
4. Replace all panels that were removed during installation, and retest the system.
5. Explain the operation of the system and its various features to the end user if available, and place the
Owner's Manual on the dashboard for them to find and review.