HIGH PERFORMANCE SUBWOOFERS MODELS AVW110, AVW111, AVW121 and AVW122 OWNERS MANUAL Released 2-25-03
Congratulations on your purchase of the Rampage High Performance Subwoofer. The Rampage Subwoofers are designed to provide you with high quality Bass reproduction required to make your car audio system perform to its full potential.
each other in parallel, a 1-Ohm monaural output would result (See Fig. 2). On the other hand, if your amplifier is rated for 4-Ohm operation in bridged or one-channel operation, series-connect the woofer voice coils (See Fig. 3). If the amplifier is rated for 8 Ohms, interconnect the voice coils of the woofer in series as shown to obtain an 8-Ohm monaural output (See Fig. 4).
INSTALLATION RECOMMENDATIONS To realize the utmost in sound reproduction from your subwoofer(s), follow these installation recommendations: Use a quality large gauge wire to connect your subwoofer to the amplifier Use a subwoofer crossover to remove unwanted higher frequencies Position the enclosure in the rear of the vehicle with the subwoofer facing rearward to improve bass response and avoid cancellation of audio frequencies ENCLOSURE CONSTRUCTION RECOMMENDATIONS To enhance subwoofer performance, the fo
Parameters AVW111 Fo (Hz) 36.44 35.84 30.33 32.42 Revc (Ohms) 2.7 1.6 1.6 2.7 Levc at 1kHz (mH) 1.44 0.97 1.19 1.48 Qms 4.27 5.72 4.27 4.07 Qes 0.54 0.46 0.32 0.57 Qts 0.48 0.43 0.29 0.50 Vas (Ltrs) 31.98 61.23 39.06 68.84 Spl @ 1W/1M (dB) 86.44 89.67 87.19 87.
Recommended Enclosure Volumes AVW111 AVW121 AVW110 AVW122 Minimum sealed (Cu. Ft) 0.35 0.5 0.35 0.75 Maximum sealed (Cu. Ft) 0.75 1.0 0.75 1.25 Vented (Cu. Ft) 1.5 2 1.25 2.25 Vented to (Hz) 34 34 34 32 Port Diameter (“) 3 4 3 4 Port Length (“) 8.5 11.5 7.5 12 Number of Ports 1 1 1 1 Port Area (Sq/In) 7 12 7 12 Port Length (") 8.5 11.5 7.