ACD-30 DETACHABLEFRONTPANEL ELECTRONICALLY-TUNEDAM/FM/MPXRADIO WITHPROGRAMMABLECDPLAYER ANDQUARTZCLOCK
INDEX How To Use This Manual ................................................................. Page 1 Kit Information .................................................................................. Page 2 Universal and Import Car Installations .............................................. Page 3,4 Chrysler-Dodge-Plymouth Installations ............................................ Page 5 Chevrolet-Oldsmobile-Pontiac-Buick-GMC Cadillac-Saturn Installations ..................................................
KITINFORMATION 1. The years shown in the Kit Listing below are approximate. Always check the application chart at your retail store to find information on your specific make, model and year of vehicle. If a kit is required, read the description on the kit you intend to purchase to make sure it applies to your vehicle. If you have any doubts or questions, call our toll-free "HELP" line. 2. The kits shown below are Audiovox kits.
UNIVERSALINSTALLATIONANDIMPORTCARINSTALLATION UNIVERSALINSTALLATIONANDIMPORTCARINSTALLATION This installation is designed for cars, trucks, vans, and boats that have an existing radio opening that is no larger than the size shown on the template provided (182mm wide x 53mm high). If the opening is smaller than required, you can use a file to enlarge it to match the template, using the slots on the template as a guide.
UNIVERSALINSTALLATIONANDIMPORTCARINSTALLATION A. Place radio in front of dashboard opening so that wiring can be brought through the mounting sleeve. B. Carefully follow the diagrams on pages 8 and 9 to wire the radio, making certain all connections are secure and insulated with wire nuts or electrical tape to insure proper operation of the unit. C. After completing the wiring, re-attach the front panel to the chassis and turn the unit on to confirm operation (ignition switch must be "on").
CHRYSLER-DODGE-PLYMOUTHINSTALLATION CHRYSLER-DODGE-PLYMOUTHINSTALLATION AllU.S.MadeCars,Trucks,andVansBuiltSince1974 Important-This radio cannot be installed in any U.S. made Chrysler, Dodge, or Plymouth without an installation kit. Refer to Kit Listings on page 2 for the required kit. Complete kit installation is explained in the instructions included with the kit. CAUTION: 1. DO NOT CUT OR FILE THE OPENING TO THE OUTER EDGES OF THE TEMPLATE! 2.
Important-This radio cannot be installed in any "GM" vehicle without an installation kit. Refer to Kit Listings on page 2 for the required kit. Complete kit installation is explained in the instructions included with kit. This radio cannot be installed in GM vehicles built before 1982. CAUTION: 1. DO NOT CUT OR FILE THE OPENING TO THE OUTER EDGES OF THE TEMPLATE! 2. FOR PROPER OPERATION OF THE CD PLAYER, THE CHASSIS MUST BE WITHIN 20° OF HORIZONTAL. MAKE SURE THE UNIT IS MOUNTED WITHIN THIS LIMITATION. 1.
FORD-LINCOLN-MERCURYINSTALLATION FORD-LINCOLN-MERCURYINSTALLATION AllU.S.MadeCars,Trucks,andVansBuiltSince1985 Important-Measure the size of your existing radio opening. If it is no larger than the size shown on the template provided, you can install the radio as explained on page 3 and 4. If the opening is larger, you must use a kit. See Kit Listing on page 2. This radio cannot be installed in Ford cars built prior to 1985. CAUTION: 1. DO NOT CUT OR FILE THE OPENING TO THE OUTER EDGES OF THE TEMPLATE! 2.
RADIOWIRING ANTENNA AUTOMATIC ANTENNA CAR FUSEBLOCK PINK IMPORTANT RADIOWIRING REFERTOPAGE9FORSPEAKERWIRING THEPINKWIRECANBEUSED TOREMOTELYACTIVATEAN AUTOMATICANTENNAORAN EXTERNALAMPLIFIER(SEE ANTENNA OR AMPLIFIER MANUAL) EXISTING ANTENNA CABLE "RADIO"OR "ACCESSORY"FUSE ORANGEw/WHITESTRIPE BLACKw/WHITESTRIPE SCREW METALPARTOFDASH (DRILLHOLEIFNECESSARY) CARBATTERY GREENw/WHITESTRIPE IMPORTANT THISWIREMUSTBECONNECTEDASSHOWN ORRADIOWILLNOTOPERATEPROPERLY SEEPAGE9FORSPEAKERWIRING (4PAIRSOFGREYWIRE
SPEAKER WIRING SPEAKER WIRING - 4 SPEAKER SYSTEMS REFERTOPAGE8 FORRADIOWIRING WARNING! NEVERGROUNDNEGATIVESPEAKERLEADSTOCHASSISGROUND. FAILURETOWIREEXACTLYASSHOWNBELOWWILLCAUSEELECTRICALDAMAGETOTHERADIO.
SPEAKER WIRING - 2 SPEAKER SYSTEMS WARNING! NEVERGROUNDNEGATIVESPEAKERLEADSTOCHASSISGROUND. FAILURETOWIREEXACTLYASSHOWNBELOWWILLCAUSEELECTRICALDAMAGETOTHERADIO.
OPERATINGINSTRUCTIONS OPERATINGINSTRUCTIONS 3 12 6c nbr n b cs 45 b u c q c p 1 ON-OFF SWITCH/VOLUME CONTROL Rotate this knob clockwise to turn the radio on. Continue rotation until the desired volume level is obtained. Rotate the knob fully counterclockwise to turn the unit off. 2 LEFT / RIGHT BALANCE CONTROL (PUSH) Push this knob inward and rotate it to the left or right to obtain the desired balance between left and right speakers. A detent click can be felt at the center of rotation.
7 MANUAL UP/DOWN TUNING ( / ) Pressing either side of the button for longer than 0.5 seconds will activate the Automatic Seek Tuning function in the selected direction (as indicated by “ U P” or “ d O” on the display panel). The radio will seek the next available station and stop on that frequency. 8 PRE-SET SCAN TUNING (PS) AUTO-STORE TUNING (AS) During radio operation, press this button to scan the 6 stations pre-set into the memories of the band in use.
OPERATINGINSTRUCTIONS bn AUTO-RADIOTUNING(ART) By pressing this button and activating this function (indicated by “ART” on the display panel), the radio will automatically tune to a strong listenable station if the station it is tuned to becomes too weak and noisy for clear reception. This feature is most useful when traveling in fringe reception areas. bo LIQUID CRYSTAL DISPLAY PANEL The Liquid Crystal Display (LCD) panel displays the frequency, time and activated functions.
co DISC EJECT ( cm cp DISC STANDBY SELECTOR (ST-BY) During disc play, press this button to temporarily stop play of the disc (the play arrow “ “ on the display panel will disappear). Press the button again to resume play of the disc from the point at which it was stopped. PROGRAMMEMORYSELECTION Up to 6 tracks can be programmed to be played in your selected order on this unit. The following procedure is used to program the order of track play: 1. Insert the disc into the unit to begin disc play. 2.
OPERATINGINSTRUCTIONS NOTES ON USE OF FRONT PANEL 1. Make sure the front panel is right-side-up when attaching the panel to the chassis as it cannot be attached when upside-down. 2. Do not press very hard on the panel to engage the mechanism when attaching the panel. No more than light to moderate pressure should be needed. 3. When detaching the panel, be sure to pull it off from the right side, and not straight toward you.
SPECIFICATIONS 7" W x 2" H x 6-1/4" D 179 mm x 51 mm x 159 mm Operating Voltage: 12 volts DC, negative ground Output Power: 50 watts maximum (25 watts per channel) Output Wiring: Floating-ground type designed for 4 speaker use. May also be used with 2 speakers. RCA low-level outputs. Output Impedance: Compatible with 4-8 ohm speakers. Low-Level Output: 500 mv. Tuning Range: AM: 530-1,720 KHz. (10 KHz. step) 531-1,620 KHz. ( 9 KHz. step) FM: 87.5-107.9 MHz. (200 KHz. step) 87.5-108.0 MHz.
TROUBLESHOOTING TROUBLESHOOTING PROBLEM PROBABLE CAUSE CHECK FOLLOWING Incorrect power connection Orange/White stripe wire to +12V ACC.
The radio section of your new sound system does not require any maintenance. We recommend you keep this manual for reference on the many features found in this unit as well as how to set the clock. The compact disc player section also requires no routine maintenance, but proper understanding of its use and handling will help you obtain maximum enjoyment of its capabilities. The following points should be observed: When cleaning the interior of the vehicle, do not get water or cleaning fluids on the unit.
12 MONTH LIMITED WARRANTY Applies to In-dash radios, radio/tape player and radio/CD player combinations, and CD Changers.
