" 0 0 . 0 ..
~:.~ LCD (LIQUID CRYSTAL DISPLAY) MONITOR The operation of the LCD monitor is a very simplc operation. There are two brightness buttons on the unit for increasing brightness (+) and decreasing brightness (-). These buttons MIl adjust brightness for the type ofvideo source being used, and also adjust for the vicMng angle. See Figure I. The color and the tint of the monitor are factory preset, but if the monitor is ever in need of adjustment there are color and tint controls on rear of monitor.
LCDSELECTORSTATION Each monitor will have its O\\"Dselector station. The station consists of a S-lX>sition rotaJY S\\itch. 1/8" stereo headphone jack. and a volume control. The rotary SYfitchhas five different selections to choose from (Off, Radio, Video I, Video 2, Video 3). In the "00- position there is no IX>wei to the unit In the -Radio" position there is audio to the headphone system, but the LCD monitor mIl be off. In the three different "Video- IX>sitionsyou will select bern.
~ TUNER BOX (TBX-l000) OPTIONAL The tuner box is a very easy system to operate. To use the tuner box you must first use the LCD selector station and dial to Video 1,2, or 3 whichever is the correct selection. You can operate the tuner either by using the Tuner Control Station (Fig. 4), or by using the the supplied,Unified Remot~ Control (Fig. S). Below is a description of the Tuner Control Station and Remote Control.
