2.4GHz HANDSET For use with Audiovox TL1102 Base Station COMBINÉ 2.
CONTENTS IMPORTANT SAFETY INSTRUCTIONS .............................. 2 - 3 BATTERY CAUTIONARY INSTRUCTIONS .............................. 3 IMPORTANT ELECTRICAL CONSIDERATIONS .................. 4 - 6 • Telephone line problems • FCC Part 15 regulation • Customer information • Applicable for coin or pay phone only INSTALLATION ...............................................................
IMPORTANT SAFETY INSTRUCTIONS Please take a few moments to read the following instructions for your safety and to ensure that you get the maximum benefit from your product. When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following : 1) Read and understand all instructions. 2) Follow all warnings and instructions marked on the product.
IMPORTANT SAFETY INSTRUCTIONS d) If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions. Improper adjustment of other controls may result in damage, and will often require extensive work by a qualified technician to restore the product to normal operation. e) If the product has been dropped of the cabinet has been damaged. f) If the product exhibits a distinct change in performance.
IMPORTANT ELECTRICAL CONSIDERATIONS Unplug all electrical appliances when you know an electrical storm is approaching. Lighting an pass through your household wiring and damage any device connected to it. This telephone is no exception. Warning : Please do not attempt to unplug any appliance during an electrical storm.
IMPORTANT ELECTRICAL CONSIDERATIONS An applicable certification jacks Universal Service Order Codes (USOC) for the equipment is provided (i.e., RJ11C) in the packaging with each piece of approved terminal equipment. A plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant telephone cord and modular plug is provided with this product.
IMPORTANT ELECTRICAL CONSIDERATIONS “This product meets the applicable Industry Canada technical specifications.” Before installing this equipment, users should ensure that it is permissible to be connected to the facilities of the local telecommunications company. The equipment must also be installed using an acceptable method of connection.
INSTALLATION Handset Installation and Charging Plug the AC/DC adaptor jack into the back of the charger and then plug the AC/DC adaptor into a compatible wall socket. The rechargeable battery pack must be charged for approximately 10 hours before first use. The battery pack will not have been inserted into the handset so please insert the battery pack into the back of the handset. Place the handset into the cradle and the CHARGE LED should light, indicating the battery pack is being charged.
INSTALLATION Install charger unit in a location where: • Away from electrical appliances, such as computer, TV, microwave ovens, wireless equipment or another cordless phone. • In a HIGH and CENTRAL location with no obstructions & barriers, • Being visible at most of your area. E-8 9038_1_ib_e.
LOCATION OF CONTROLS HANDSET SECTION CHARGER SECTION 1) 2) 3) 4) 5) 6) 7) 8) 9) 10) 11) 12) 13) 14) CHARGE LED 15) ADAPTOR SOCKET RECEIVER DISPLAY OFF HOOK / YES / FLASH KEY INT/REDIAL / PAUSE KEY ON HOOK / NO KEY SCROLL KEYS 5/6 DIAL KEYS / ID#’s SPEAKER KEY MICROPHONE STRAP HOLDER SPEAKER BATTERY DOOR HEADSET JACK 15 14 ACCESSORIES 16) CHARGER ADAPTOR 17) BATTERY PACK 16 17 12 ICON EXPLANATIONS RECEIVED SIGNAL STRENGTH INDICATOR (RSSI) : On when registered and in range, flashes when out of range.
SUBSCRIBING HANDSET TO BASE STATION Please note that subscription of the additional handset to a base station is required before first use. Subscriptions requires the use of a PIN code. The PIN code is 4321. Important : For best result, the handset set up procedure should be performed within 5 feet of the main base. SUBSCRIBING HANDSET TO TL1102 BASE STATIONS This is the case when the user wishes to add a subscription to a base station.
SUBSCRIBING HANDSET TO BASE STATION • After a few second, “H ?” will be shown on LCD. Note : The handset will not automatically link with another Base that it is already subscribed to. The user must select an existing Base station or subscribe to a new one. SELECTING BASE STATION TO BE USED When a handset is subscribed to several different base stations, the user selects which should be used as follows: • Press scroll keys 5/6(6) to select “ADVANCED”, then press to confirm.
TROUBLE SHOOTING GUIDE In the event of your telephone NOT working or difficulty in opening, the following suggestion can be help you of solving the problem. Symptom Suggested Solution Base unit doesn't work (Power "LED" does not light) • Ensure the power adaptor is firmly plugged into power outlet & base unit. • If base LED on unit is still NOT lighted up, make sure the power outlet has power by connecting another appliance to the outlet.
9038_1_ib_e.p65 90 DAY LIMITED WARRANTY AUDIOVOX ELECTRONICS CORPORATION (the Company) warrants to the original retail purchaser of this product that should this product or any part thereof, under normal use and conditions, be proven defective in material or workmanship within 90 days from the date of original purchase, such defect(s) will be repaired or replaced with new or reconditioned product (at the Company’s option) without charge for parts and repair labor.
