0.2” Low Profile DVD/TV/Speakerphone - DVD Player & 10.
INTRODUCTION WARNING – To prevent fire or shock hazard, do not expose this unit to moisture. CAUTION: TO REDUCE THE RISK OF CAUT ION ELECTRIC SHOCK, DO NOT REMOVE COVER (OR SERVICEABLE SERVICING BACK). PARTS TO NO INSIDE. QUALIFIED USERREFER SERVICE PERSONNEL. This symbol is intended to alert the user to the presence of uninsured “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
INFORMATION This equipment generates and uses radio frequency energy and if not installed and used property, that is, in strict accordance with the manufacture’s instructions, may cause interference to radio and found to not comply with the limited for a Class B computing device in accordance with the specifications in Subpart J of Part 15 or FCC Rules, which are designed to provide reasonable protection against such interference in a residential installation.
IMPORTANT SAFETY INFORMATION 1. Read Instructions – All the safety and operating instructions should be read before the product is operated. 2. Retain Instructions – The safety and operating instructions should be retained for future reference. 3. Head Warnings – All warnings on the product and in the operating instructions should be adhered to. 4. Follow Instructions – All operating and use instructions should be followed. 5. Cleaning – Unplug this product from the wall outlet before cleaning.
12. Grounding or Polarization – This product may be equipped with a polarized alternating current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug still cannot be inserted, contact your electrician to replace your outlet. Do not defeat the safety purpose of the polarized plug. 13.
technician to restore the product to it’s normal operation. E. F. If the product has been dropped or damaged in any way. When the product exhibits a significant change in performance – this indicates a need or service. 21. Replacement Parts – When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock or other hazards.
IMPORTANT SAFETY INFORMATION 1) Unplug the unit before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. 2) Use only Audiovox approved accessories. 3) Do not install the product where it is likely to be exposed to water. 4) Do not obstruct the slots and openings in the cabinet. They are provided for ventilation and are necessary to ensure reliable operation of the unit and to protect it from overheating.
CONTENTS OF PACKAGE 1. VE700TVPhone 4. F. 1/4” Spacer (4) 2. Hardware bag G. 1/2” Spacer (4) A. 3/4”Mounting screws (4) H. 3/4” Spacer (4) B. 1-1/4” Mounting screws (4) 5. Battery, size AAA (2) C. 1-1/2”Mounting screws (4) 6. Telephone cord D. Foot (4) 7. FM Dipole Antenna E. Hole cap (4) 7. Right angle coaxial adapter 3. Remote Control Unit (for the TV input) 9. FM Antenna Adapter 10. AM Antenna 11. Mounting Template 12.
Under Cabinet Installation 1) Choose an appropriate mounting location underneath a cabinet or shelf. Close proximity to an electrical outlet, a TV antenna or cable connection and a telephone jack will facilitate a neat, easy installation. Do not mount the VE1020 above a range or oven. Be sure that the location chosen will provide adequate access to the electrical connection on the rear of the unit before continuing.
COUNTERTOP / DESKTOP INSTALLATION NOTE: Use caution to avoid damaging the LCD screen and the main unit when converting this unit from an under-counter unit to a countertop unit. Leave the protective plastic on the screen until this procedure is completed. 1) Place the unit (with the screen facing up) on a soft padded surface. 2) Pivot the screen so that it is perpendicular to the front of the unit.
Front Panel Controls 1. Microphone: Used for hands-free speakerphone operation and message function 2. ON/OFF: Power ON/OFF and Standby Condition (Time Display). 3. SET: Confirms selection of TIME, ALARM, ALARM-Tone, TV-Mode or Menu item. Navigation ON/OFF button in DVD play mode. 4. TEL: Selects the Hands-free speakerphone function. 5. SOURCE: Selects the TV, FM, AM, AV1, AV2 and DVD functional modes. 6. Volume Control Button 7.
15. Disc slot: For inserting DVD’s or Audio CD’s 16. Channel Control Button (UP, DOWN, LEFT, RIGHT): Navigation button in DVD play mode. 17. ENTER: Enters the desired function during the DVD Mode. Rear Panel Controls Delete item 1, renumber 2 - 8 1) AUDIO LOW-LEVEL LINE OUT – Connect to low-level input of stereo system or low-level input of computer speakers. 2) STEREO OUTPUT TERMINAL – Connect to external speakers.
LCD Control Functions 1. MENU Button – When pressed, the LCD control MENU is displayed. 2. SEL Button – Highlights the menu item to be changed using the UP/DOWN buttons. 3. UP Button – Scrolls upward through menu items, also adjusts selected item in upward (increase) direction. 4. DOWN Button – Scrolls downward through menu items; also adjusts selected item; in downward (decrease) direction.
Operation Initial Setup: This unit defaults to cable TV mode. When the unit is first powered on, it will detect the cable system and auto-program the TV tuner to the available stations. Please wait while the unit auto-programs before attempting to operate the unit. During this time the unit will not respond to any button at all. The unit will respond normally once the cable mode and channel search mode is concluded.
SETTING THE TIME NOTE: TheVE1020 must be turned off (except when SETTING THE PRESETS). 1) Press the SET button and the minutes will flash. 2) Use the CH UP/DOWN buttons to set the minutes. 3) Press the SEEK buttons to toggle between the hour and minutes. 4) Use the CH UP/DOWN buttons to set the hour(Check AM/PM indicator). 5) Press the ON/OFF button to return to the time display. SETTING and ACTIVATING the ALARM NOTE: the VE1020 must be turned ″OFF″ when performing the following procedure.
Remote Control (1) EJECT (2) DVD (3) TV (4) SETUP (5) SEEK DN, SEEKUP (6) MENU (7) FR( ) (8) STOP( █ ) (9) PREV ( ) (10) Digit 0-9 Select (11) TITLE (12) DISPLAY (13) SUB TITLE (14) AUDIO (15) SCREEN (16) ANGLE (AP) (17) ON/OFF (18) A/V (19) AM/FM (20) TEL (21) CH+, CH(22) ENTER (23) MUTE (24) FF ( ) (25) SF ( ) (26) NEXT ( ) (27) PLAY/PAUSE ( (28) VOL +/(29) SEARCH (30) REPEAT (31) A-B Repeat (32) ZOOM (33) ERASE (34) STEP (ADD) - 16 - )
Remote Control Functions DVD MENU (1) EJECT: Press this button to Eject and Load the disc tray. (2) DVD: Press this button to select DVD mode of operation. (4) SETUP: Displays setup menu for initial user settings. (5) SEEK DN/UP (21) CH+/-: For selecting item on menu. (6) MENU: For displaying the menu contained in the disc. (PBC ON/OFF Function - VCD) (7) FR ( ): Fast reverse (2X, 4X, 8X, and 20X).
Remote Control Functions TV MENU (3) TV: Press this button to select TV mode of operation. (5) SEEK DN/UP: Use these buttons to advance to the next higher or lower station. (10) 0~9: Use these buttons to make a direct channel selection (15) SCREEN: Press this button to change Display Mode. (16) AP (Auto Program): Press this button for 0.5sec to program and save all the stations on memory. (21) CH+/-: Use these buttons to advance to the next higher or lower channel.
Modes of Operation SETTING THE CABLE TV MODE 1) With the unit turned off, press the SET button three times to enter the cable configuration mode. 2) CABL appears on the display. Note: If AIR appears, use the Seek Up/Seek Dn to select CABL. 3) Press the CH up/down button to select the cable mode (STD/IRC/HRC). (NOTE: If you are not sure what cable system you have, contact your local cable supplier).
Using the Remote Control Functions Inserting and Ejecting the Disc 1. Set the unit to DVD mode (press source button until --------- appears on the display. 2. Insert the disc with the label facing up. 3. The disc will begin playing automatically. If it is a DVD it will go to the menu. Press PLAY to begin watching the movie. * Discs playable through DVD player – DVD, CD, and CD-RW with MP3. Playback and Stop 1. To temporarily stop playback, press the STOP button once (STOP1 will appear on the screen).
Using the Remote Control Functions Searching for a Specific Scene/song by using Playback Speed 1. Search by fast forward ( ) and reverse ( 2. Search by slow forward ( ). ). 3. 3. Search by watching one frame at a time. Press the PLAY/PAUSE button ( ) and then the STEP button. * For normal speed playback, press the PLAY or ENTER button. Repetitive Playback –To Repeat a Specific Section 1. Pressing the REPEAT button once, the current chapter or track will be replayed repetitively (CHAPTER REPEAT ON).
ZOOM 1. Pressing the ZOOM button would allow the picture to be enlarged by X1, X2, or X3. 2. Navigation buttons (Seek Dn/Seek Up/Ch Up/Ch Dn) allow the enlarged picture to be shifted. 3. To resume normal settings, press the ZOOM button again until ZOOM is OFF). Viewing Different Angles 1. Angle indicator appears on the upper part of the DVD player display. When the Angle indicator appears, Press the 9 preset button twice to view the screen from various angles.
Using The Setup Menu The setup menu allows the user to select the play mode settings. Follow the basic steps below for each setup menu selection. To use the SETUP menu: 1. Press the SETUP button to display the main menu. The following Menu will appear 2. Press ENTER, the following screen will appear 3. Use the ▲or▼ buttons to highlight the desired menu item. 4. Press the ENTER button to display the sub-menu. 5. Each sub-menu item provides a number of option items to its right.
6. Press the ENTER button to select the option item, then press the ◄ buttons to return to the sub-menu. 7. Press the ▲ or ▼ Buttons to highlight the next sub-menu item for setup and repeat steps 4 and 5. 8. Press the SETUP button to exit the SETUP mode, LANGUAGE Menu OSD Menu English: Use to select DVD Setup Menu Language (ENGLISH - Default). SUBITILE Off: Select a language for subtitles (Disc dependent). ENGLISH (DEFAULT), FRENCH, SPANISH, CHINESE, JAPANESE OFF: No subtitles are displayed.
222)))G - Will play G rated movies 333)))PG - Will play PG rated movies 444)))PG-13 - Will play PG-13 rated movies 555)))PG-R - Will play PG-R rated movies 666)))R - Will play R rated movies 777)))NC-17 - Will play NC-17 rated movies 888)))Adult - Will play Unrated rated movies PASSWORD: The user will be prompted to enter the Previous Password. FIRST TIME SETUP: enter the Default password = 3308.
Definition of terms DEFINITON OF TERMS Title TITLE Definition The largest playback unit of images or music recorded in DVD. Each title has a title number that simplifies the song selecting process. CHAPTER A smaller playback unit than title image or music recorded on a DVD. Several chapters compose a Title. SUBTITLES Captioning on the bottom part of the screen which shows translated dialogues. Up to 32 national languages can be supported when producing a Title. Subtitles are disc dependent.
Troubleshooting Check List Problem Solution Power does not turn on • Check if the power cord is securely plugged into the wall • Check if the batteries of the remote control unit are not depleted. Disc fails to play • Check if the disc is inserted properly into tray. • Check if the disc has viewing restriction selected. • Check if the disc is of the proper region code. • Not all discs are playable in the DVD. • Check with the beginning part of the manual on whether the disc is playable.
Technical Specification GENERAL: Power supply: AC 100 – 240V, 50/ 60hZ, 40 watts Operating Temperature: 0~40C° (32 – 100F) Operating Humidity: 10% ~ 75 % Unit Size: 13-3/4” W x 10.2” D x 1.85” H – (Screen closed) 352 X 259 X 47(mm) Weight: 5.4 lbs (2.7 kg) DISPLAY: LCD Illumination: CCFL Edge Lit Tube Backlighting life Expectancy: 10,000Hrs. Resolution: 800(RGB) X 480(H) Screen: TFT LCD 10.2” Wide DISC AVAILABLE: DVD: Linear Velocity – 3.49m/mec Maximum Playback Time – 135minutes CD: Linear Velocity – 1.
- 29 -