• • • • • • • Multi-function Remote Control Built-in Hands Free Speaker Phone Cable Ready 125 Channel TV Tuner Internal Stereo Speakers Under Cabinet / Table Top Mounting A/V Input AM/FM Radio Tuner -1-
INTRODUCTION WARNING – To prevent fire or shock hazard, do not expose this unit to moisture. CAUTION: TO REDUCE THE RISK OF CAUT ION ELECTRIC SHOCK, DO NOT REMOVE COVER (OR SERVICEABLE SERVICING BACK). PARTS TO NO INSIDE. QUALIFIED USERREFER SERVICE PERSONNEL. This symbol is intended to alert the user to the presence of uninsured “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
INFORMATION This equipment generates and uses radio frequency energy and if not installed and used property, that is, in strict accordance with the manufacture’s instructions, may cause interference to radio and found to not comply with the limited for a Class B computing device in accordance with the specifications in Subpart J of Part 15 or FCC Rules, which are designed to provide reasonable protection against such interference in a residential installation.
IMPORTANT SAFETY INFORMATION 1. Read Instructions – All the safety and operating instructions should be read before the product is operated. 2. Retain Instructions – The safety and operating instructions should be retained for future reference. 3. Head Warnings – All warnings on the product and in the operating instructions should be adhered to. 4. Follow Instructions – All operating and use instructions should be followed. 5. Cleaning – Unplug this product from the wall outlet before cleaning.
other sources, refer to the operating instructions. 12. Grounding or Polarization – This product may be equipped with a polarized alternating current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug still cannot be inserted, contact your electrician to replace your outlet.
those controls that are covered by the operating instructions, as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to it’s normal operation. E. If the product has been dropped or damaged in any way. F. When the product exhibits a significant change in performance – this indicates a need or service. 21.
IMPORTANT SAFETY INFORMATION 1) Unplug the unit before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. 2) Use only Audiovox approved accessories. 3) Do not install the product where it is likely to be exposed to water. 4) Do not obstruct the slots and openings in the cabinet. They are provided for ventilation and are necessary to ensure reliable operation of the unit and to protect it from overheating.
CONTENTS OF PACKAGE PW R TEL TV M UTE VO L C H EN T CH SEEK VO L A /V F M /A M 1 2 3 4 5 6 ADD 7 8 9 0 ERA SE 1. VE700TVPhone 4. F. 1/4” Spacer (4) 2. Hardware bag G. 1/2” Spacer (4) A. 3/4” Mounting screws (4) H. 3/4” Spacer (4) B. 1-1/4” Mounting screws (4) 5. Battery C. 1-1/2”Mounting screws (4) 6. Telephone Jack D. Foot (4) 7. FM Dipole Antenna E. Hole cap (4) 8. Angle Coaxial 3. Remote Control Unit 9. FM Antenna Jack 10. AM Antenna 11. Mounting Hole Template 12.
UNDER CABINET INSTALLATION 1) Choose an appropriate mounting location underneath a cabinet or shelf. Close proximity to an electrical outlet, a TV antenna or cable connection and a telephone jack will facilitate a neat, easy installation. Do not mount the VE700 above a range or oven. Be sure that the location chosen will provide adequate access to the electrical connection on the rear of the unit before continuing.
adhesive wire-mounting clip provided. COUNTERTOP/DESKTOP INSTALLATION NOTE: Use caution to avoid damaging the LCD screen and the main unit when converting this unit from an under-counter unit to a countertop unit. Leave the protective plastic on the screen until this procedure is completed. 1) Place the unit (with the screen facing up) on a soft padded surface. 2) Pivot the screen so that it is perpendicular to the front of the unit.
FRONT PANEL CONTROLS 1) MICROPHONE – For hands-free speakerphone operation. 2) ON/OFF BUTTON – Power ON/OFF and Standby Condition. (Time Display). 3) P1- User – Selected Preset Channel “1” in the Radio or TV mode. 4) P2 - User – Selected Preset Channel “2” in the Radio or TV mode. 5) P3 - User – Selected Preset Channel “3” in the Radio or TV mode. 6) Volume Control Button 7) TEL – Selects the Hands-Free PSTN Speaker Phone function.
REAR PANEL CONNECTIONS 1) AC LINE CORD – Connects to AC input power outlet 2) AUDIO LOW-LEVEL LINE OUT – Connect to low-level input of stereo system or low-level input of computer speakers 3) AM ANTENNA - Allows the VE700 to be connected to an external antenna for the reception of AM broadcast signals. 4) Audio/Video (A/V) Input Connector –Support stereo audio and A/V input from an external source.
BATTERY INSTALLATION 1) Turn the Remote Control face down. Place a fingernail, or coin in the open slot, slide battery holder out. 2) Install the CR2025 battery into its proper slot. 3) Slide the cover back until it clicks.
REMOTE CONTROL FUNCTIONS 1. POWER ON/OFF (PWR) Press this button to turn the TV on. Press the button again to turn the TV off. 2. ENTER AUTO PROGRAM. Press this button for half second to save all the stations on memory. (TV Channel) 3. CHANNEL UP/DOWN Use these buttons to advance to the next higher or lower channel. 4. NUMERICAL BUTTONS (1~9, 0) Use these buttons to make a direct channel selection. 5. VOLUME UP/DOWN BUTTONS (VOL) Use these buttons to increase or decrease the volume. 6.
Press this button to remove all sound (Indicators blinks on display window). REMOTE CONTROL FUNCTIONS (Cont) 9. SEEK BUTTONS (SEEK) Use these buttons to advance to the next higher or lower station. 10. FM/AM Each time this button is pressed, the VE700 will alternate between AM and FM. 11. ADD (ERASE) Saving or erasing the current station (TV channel).
OPERATION Initial Setup: This unit defaults to cable TV mode. When the unit is first powered on, it will detect the cable system and auto-program the TV tuner to the available stations. Please wait while the unit auto-programs before attempting to operate the unit. During this time the unit will not respond to any button at all. The unit will respond normally once the cable mode and channel search mode is concluded.
SETTING and ACTIVATING ALARM NOTE: The VE700 must be turned “OFF” when performing the following procedure. 1) Press the SET button (1) twice to and VE700 is in alarm mode indicated by six flashing LED’s. A preset time will be displayed with the minutes portion blinking. (Alarm ACTVATED mode, Alarm indicator “ AL” on). NOTE: If a series of dashes appear (--: --, Alarm DEACTIVATED mode) press the FM/AM button once to switch to the Alarm ACTVAVTED mode.
SETTING THE AIR TV MODE 1) Press the SET button three times to enter the cable configuration mode 2) Press the SEEK button to select the AIR mode AIR appears on the display (switched from broadcast TV (VHF or UHF) to cable TV). 3) When the desired mode is reached, press the PWR button or T/F button to confirm. SETTING THE PRESETS (FOR AM AND FM RADIO OR TV MODES) 1) Tune the desired channel 2) Press the SET button and the display flashes.
TECHNICAL SPECIFICATIONS GENERAL Power Supply AC100-240V ~50/60Hz 40watts Operating Temperature 0°~40°C Operating Humidity 10% ~ 75% Body Size 352 X 259 X 47 Weight 1.8 Kg DISPLAY Illumination CCFL Edge Lit Tube Backlighting Life Expectancy 10,000Hrs Resolution 1440(W) X 234(H) Screen TFT LCD 7” Wide (Diagonal) TV Channels VHF/UHF (2-69), 125 CABLE TV TV System NTSC MISC Radio Frequency Range Audio output AM 530KHz – 1710KHz FM 87.5MHz – 107.9MHz 1.
TROUBLES SHOOTING Problem Poor Reception Solution • Verify Tuner setting matches Antenna/Cable broadcast system. Remote control will not function • Verify that the sensor on the VE700 is not obstructed. • Verify that the infrared LED on the transmitter is not obstructed. • Check the condition of the remote control batteries. Black and White Reception • Verify Tuner setting matches Antenna/Cable broadcast system. Try other system types with the TV/CATV BUTTON of the remote control.
- 21 -
