VM9725BT Operating Instructions 160 watts peak 40W x 4
VM9725BT Thank you for choosing a Jensen product. We hope you will find the instructions in this owner’s manual clear and easy to follow. If you take a few minutes to look through it, you’ll learn how to use all the features of your new Jensen VM9725BT Mobile Multimedia Receiver for maximum enjoyment. CONTENTS Features .................................................................................................................. 3 Controls and Indicators .................................................
VM9725BT FEATURES Congratulations on your purchase of the Jensen VM9725BT Mobile Multimedia Receiver. It’s a good idea to read all of the instructions before beginning the installation. We recommend having your Jensen VM9725BT installed by a reputable installation shop.
VM9725BT Chassis • • • • • • 2.0 DIN (Import / ISO-DIN Mountable) Fixed Front Panel 6.2” High Definition TFT LCD 1,152,000 Sub Pixels (800 x 3 X 480) Beep Tone Confirmation (ON-OFF Option) Heat Management System - Forced-Air Cooling To Keep The Chip-Sets Operating at Nominal Temperatures General • Built-In Bluetooth® with external microphone, providing Hands-Free operation for safety and convenience and A2DP for streaming music from your smartphone or other Bluetooth® device.
VM9725BT WARNING! Never install this unit where operation and viewing could interfere with safe driving conditions. WARNING! To reduce the risk of a traffic accident (except when using for rear view video camera) never use the video display function while driving the vehicle. This is a violation of federal law. WARNING! Never disassemble or adjust the unit. WARNING! To prevent injury from shock or fire, never expose this unit to moisture or water. WARNING! Never use irregular discs.
VM9725BT CONTROLS AND INDICATORS 13 1 2 EJECT 3 SRC 4 NAV 5 6 7 8 9 10 OPEN 11 12 6 VM9725BT 14
VM9725BT 1. Disc Slot 2. EJECT Button Press to eject a disc. 3. SRC Button Press to switch between the available audio/video sources applied to the unit. 4. NAV Button Press to toggle back and forth between the navigation and currently selected source. 5. Internal Microphone Internal microphone for Bluetooth calls. 6. Reset Button Press to reset system settings to factory default (except password and parental lock settings). 7. Rotary Encoder / Power On/Off ( ) Button Rotate to adjust the volume.
VM9725BT REMOTE CONTROL See Table 1 for remote control functions.
VM9725BT Table 1: Remote Control Functions Button Function Name # DVD VCD TUNER CD/MP3/ USB iPod EQ 1 Accesses equalizer menu. Accesses equalizer menu. Accesses equalizer menu. Accesses equalizer menu. Accesses equalizer menu. POWER (( )) 2 Turns the power on/ off. Turns the power on/ off. Turns the power on/ off. Turns the power on/ off. Turns the power on/off. PHOTO/ 3 SUBTITLE Language selection for subtitle. VIDEO/ ANGLE 4 Plays back disc in different angle for a scene.
VM9725BT Table 1: Remote Control Functions Button Function Name # DVD VCD TUNER CD/MP3/ USB iPod Selects the previous chapter for playback. Selects the previous chapter for playback. Searches for an available radio station by decreasing tuning frequency. Selects the previous track for playback. Pauses playback/ starts playback. 10 Selects the next chapter for playback. Selects the next chapter for playback. Searches an available radio station by increasing the tuning frequency.
VM9725BT Table 1: Remote Control Functions Button Function Name # DVD VCD TUNER CD/MP3/ iPod USB MUTE 16 Toggles on/off audio output. Toggles on/off audio output. Toggles on/ off audio output. Toggles on/off audio output. Toggles on/ off audio output. SCN /* 17 MIX /# 18 Plays all chapters in random order. Plays all tracks in random order. Plays all tracks in random order 1, 2, 3, 4, 5, 6, 7, 8, 9, 0 (Numeric Keypad) 19 Directly accesses chapter.
VM9725BT Table 1: Remote Control Functions Button Function Name # DVD VCD 23 Pauses playback/ starts playback. Pauses playback/ starts playback. SETUP 24 Displays Setup menu. Displays Setup menu. PRESET 25 RPT 26 Repeats playback of current chapter. Repeats playback of current chapter. REPT A-B 27 Setup to repeat playback from time frame A to time frame B. Setup to repeat playback from time frame A to time frame B. GOTO 28 Open direct entry search screen.
VM9725BT Table 1: Remote Control Functions Button Function Name # DVD ZOOM 31 Zooms in/ out on an image. Zooms in/ out on an image. DISP 32 Displays Displays playing information. playing information. VCD TUNER CD/MP3/ USB iPod Displays playing information. Display playing information. Displays playing information. MUSIC/ 33 Changes AUDIO the audio language for disc playback. Selects Music mode. EJECT ( ) 34 Ejects the disc. Ejects the disc. Ejects the disc. Ejects the disc.
VM9725BT OPERATING INSTRUCTIONS Power On / Off Press the Power On/Off ( ) button to turn the unit on. The buttons on the front of the unit light up and the current mode status appears on the LCD. Press and hold the button to Power On/Off ( ) power off the unit. Audible Beep Confirmation An audible beep tone confirms each function selection. The Beep tone can be disabled through the Setup menu. Mute Momentarily press the rotary encoder to activate the MUTE function. Press again to resume normal listening.
VM9725BT Playing Source Selections Front Source Menu Source Menu Page 1 Source Menu Page 2 You can use the touch screen to change the source through the SOURCE MENU. To access the SOURCE MENU, touch the top left corner of the screen or press the SRC button. The SOURCE MENU consists of two pages. Swipe across the screen to go from one page to another.
VM9725BT Rear Source Menu The Rear Source Menu Screen allows you to select an audio/video source for your vehicle’s rear zone. Touch the Disc, SOHC, F-USB (Front USB), R-USB (Rear USB), AUX1or AUX2 icons to select the corresponding source NOTE: If an iPod® is attached to a USB port, “iPOD” appears instead of the text “F-USB” or “R-USB.
VM9725BT External Devices External peripheral devices, including a game console, camcorder, navigation unit, iPod®, Zune, etc. can be connected to this unit via RCA output using an A/V Media Adapter Cable (not included). Cover Not Shown Right Audio Left Audio Ground V ideo 1 2 3 4 3.5mm A/V Cable (not included) Connect the external device to the A/V Media Adapter Cable and then plug the cable into the A/V INPUT connector on the front of the radio. Select “AUX IN” mode to access auxiliary devices.
VM9725BT Equalizer and Balance/Fader Controls The equalizer and balance/fader controls allow you to easily adjust your audio system to meet the acoustical characteristics of your vehicle, which vary depending on the type of vehicle and its measurements. Proper setting of the Fader and Balance boosts the effects of the cabin equalizer. Equalizer Screen Touch the EQ button display the equalizer screen.
VM9725BT Preset EQ Selection Equalizer presets apply a preset sound level to the unit’s audio output signal. Touch the User, Acoustic, Urban, Rave, Latin, Dance, Hip Hop or Rock button to change the setting. NOTE: The equalizer will automatically change to “USER” when individual audio functions are adjusted. To Exit the Equalizer: • Touch the X button on the top right corner of the screen to return to the source screen. • Touch the BAL-FAD button to display the balance/fader screen.
VM9725BT Balance/Fader Screen Touch the BAL-FAD button on the left side of the equalizer screen to display the balance/fader screen. or (Balance) icon: Balances the audio output levels between the left and right side of the vehicle. Touch the or icon to change the setting. or (Fade) icon: Balances the audio output levels between the front and back side of the vehicle. Touch the or icon to change the setting. Sub icon: Reduces or increases the subwoofer sound level.
VM9725BT System Reset To correct a system halt or other illegal operation, use [RESET] Button the tip of a pen to press the reset button located over the rotary encoder. After a system reset, the unit restores all factory default settings. NOTE: If the unit is reset while a DVD is playing, the DVD resumes play once the reset is complete. Image/Display Settings Video Output Modes Table 3 shows the video output mode for each playing source.
VM9725BT STEERING WHEEL CONTROLS (SWC) (if equipped) The VM9725BT is compatible with the PAC (Pacific Accessory Corporation) SWI-PS and Metra ASWC steering wheel control adapters. A 3.5mm female connector (labeled “SWC Interface”) on the back of the head unit allows connectivity to the adapters. Please refer to the instructions included with the adapters for detailed installation information. SWC Functions The following controls are available for most vehicles: 1. Volume Up 2. Volume Down 3. Mute 4.
VM9725BT SETTINGS MENU When using the VM9725BT for the first time, it is recommended that you customize the system settings to suit your preferences. You may also change the settings at any time. To access system settings: 1. Touch the Settings button on the Source Menu screen to enter the SETTINGS MENU. The General Sub-menu appears highlighted in blue. 2. Touch a sub-menu name icon (Video, General, Time, etc.) to select a submenu.
VM9725BT NOTE: If the rear-view video camera is connected and the unit is on, Camera mode is selected upon shifting into REVERSE gear. If the monitor is in display mode, the monitor automatically switches to CAMERA mode upon reverse driving. When the reverse driving stops, the monitor returns to its original input mode. General Sub-menu Settings Setting Options Function User Interface Color Aqua This setting allows the user to select five pre-defined LED colors for the front panel illumination.
VM9725BT Beep Background 2II No beep sounds. 2Q When turned on, an audible beep tone confirms each function selection. Animation Star Allows the user to select a screen background. The Wallpaper will not appear on the Main Source Menu, Camera source or EQ settings page. Starry Sky Black Animation Fireworks Animation Wave User Defined Calibration Start Press to access the touch screen calibration function. Demo On Display various user interface TFT display pages.
VM9725BT Time Sub-Menu Settings Setting Options Date mm/dd/ yyyy Clock Mode 12Hr Clock displays 12 hour time using AM and PM. 24Hr Clock displays 24 hour time up to 23:59. (HH:MM) Clock appears in the top right corner of the screen during certain operations. NOTE: The AM/PM indication will change as you continue to adjust the hour past 12.
VM9725BT Language Sub-menu Settings If a DVD supports more than one subtitle or audio language, all the languages are available for selection during playback. If the selected language is not supported by the DVD, then the default language is used. Setting Options Function OSD English On Screen Display appears in English. French On Screen Display appears in French. Portuguese On Screen Display appears in Portuguese. Spanish On Screen Display appears in Spanish.
VM9725BT Bluetooth Sub-Menu Settings Setting Options Function Bluetooth On Enable Bluetooth function. Off Disable Bluetooth function. On Connect the last active mobile phone by touching the Pair icon when disconnected. Off Automatically connect when your paired phone is in range On The unit automatically answers all incoming calls. Off Manually answer calls by touching the call icon. Internal Selects internal microphone for Bluetooth calls.
VM9725BT DVD Rating Sub-menu Settings The DVD system has a built-in parental lock feature to prevent unauthorized persons from viewing restricted disc content. By default, the rating system is unlocked. Once set up, the parental lock is released only by entering the correct password. Once the password is entered, rating is available for setup.
VM9725BT Volume Sub-menu Settings Setting Options Function DVD 0 - 12 Increase or reduce the relative DVD volume. USB 0 - 12 Increase or reduce the relative USB volume. SD 0 - 12 Increase or reduce the relative SD volume Radio 0 - 12 Increase or reduce the relative radio volume. Bluetooth 0 - 12 Increase or reduce the relative Bluetooth volume. AV-IN1 0 - 12 Increase or reduce the relative AV-IN1 volume. AV-IN2 0 - 12 Increase or reduce the relative AV-IN2 volume.
VM9725BT TUNER OPERATION Tuner TFT Display Screen 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. RADIO icon: Touch to view the SOURCE MENU and select a new playback source. Current radio band indicator. Stereo broadcasting indicator. Local/Distance Indicator: Strong local signal broadcasting indicator. Equalizer setting indicator: Displays the current equalizer preset setting. EQ icon: Touch for quick access to Equalizer level settings screen.
VM9725BT Options Screen Touch the Options icon to display the Options Screen. RDS ON/OFF: Radio Data System (RDS) enables traffic reports to be received and provides many facilities, including enabling the radio station name to be displayed on the radio display. CT ON/OFF: (Clock Time, RDS feature) When enabled the radio system clock is synchronized with broadcasters time signal setting the clock automatically.
VM9725BT Switching to Radio Tuner Source • Touch the top left corner of the screen (the RADIO box) to view the SOURCE MENU. Touch “Radio”. • Press the SRC button on the front panel to switch to the AM/FM or RADIO source. Selecting FM/AM Band Touch the BAND icon on the screen to change between the following bands: FM1, FM2, FM3, AM1, and AM2. Tuning to a Station Seek Tuning To seek the next higher station, touch the To seek the next lower station, touch the icon. icon.
VM9725BT Using Preset Stations Six numbered preset buttons store and recall stations for each band. All six stored stations (P1-P6) for the current band appear on the screen. Storing a Station 1. Select a band (if needed), then select a station. 2. Touch the on-screen Mem icon to access the Preset Screen. 3. Touch the preset number in which you would like to store the current station (or touch X to cancel and close the menu). The station frequency is displayed at the top of the menu.
VM9725BT Auto Store (AS) Auto Store is most useful when travelling in an area where you are not familiar with the local stations. The Auto-Store Tuning feature will automatically scan and enter up to eighteen FM strong stations into the preset memory locations for the FM1, FM2 and FM3 bands or twelve strong AM stations into the preset memory locations for the AM1 and AM2 bands. Each band stores up to six preset stations. To select six strong stations and store them in the current band: 1.
VM9725BT Search for Station by Program Type Program type (PTY) allows users to find similar programming by genre. 1. From the Tuner TFT Display, touch the Options icon to display the Options Screen. 2. Touch the PTY List icon to display the Program Type Screen. 3. Touch a program type, then touch the Search icon. The unit searches for the respective stations and stops when a station is found. Note: Touch the or icon to scroll up or down the page.
VM9725BT DVD/VCD VIDEO OPERATION NOTE: When properly installed, DVD video cannot be displayed on the main TFT screen unless the parking brake is applied. If you attempt to play a DVD while the vehicle is moving, the TFT screen displays: DVD/VCD TFT Display WARNING !!! It is illegal to view video while driving or operating a motor vehicle. Set the parking brake to view video. To access the on-screen controls, touch the bottom 1/3 of the screen while a DVD is playing. Touch to view a second page of controls.
VM9725BT Menu Page 1 1. Elapsed Time Indicator: Displays the total playing time and elapsed of the current movie playing. 2. icon: Touch to select a chapter/track directly using the on-screen display direct entry menu display. 3. icon: Touch to stop DVD playback. 4. icon: Touch to move to previous chapter. 5. (Pause / Play ) icon: Touch the icon to pause playback. Touch the icon to begin playback. icon: Touch to advance to the next chapter on the DVD. 6. 7.
VM9725BT Controlling Playback Inserting a Disc Upon inserting a DVD disc, DVD mode is entered and disc play begins. NOTE: If Parental Lock (Rating) is activated and the disc inserted is not authorized, the 4-digit code must be entered and/or the disc must be authorized (see “Rating Sub-menu Features”). You cannot insert a disc if there is already a disc in the unit or if the power is off. NOTE: DVD-R and DVD-RW will not play unless the recording session is finalized and the DVD is closed.
VM9725BT Sectional Repeat Function (A-B) Use the A-B function to define a specific area of a disc to repeat. • Touch A-B on the second page of DVD on-screen controls to set the start point (A) of the repeated section. • Touch A-B again once you reach the desired end point (B) of the repeated section. The selected portion of the DVD will now repeat continuously. • Touch A-B a third time to cancel the A-B section setting and stop repeat play.
VM9725BT Multi-Language Discs (DVD Only) Changing Audio Language If you are watching a disc recorded in multiple languages, touch Audio on the second page of DVD on-screen controls to choose a language. Each time the icon is touched the language will change. Changing Subtitle Language If you are watching a disc recorded in multiple languages with subtitles, touch Subtitle on the second page of DVD on-screen controls to choose the language in which you would like the subtitles to appear.
VM9725BT General Disc Information Table 4: Disc Properties Symbol 12cm Disc Properties Max Play Time Single side single layer (DVD-5) Single side double layer (DVD-9) Double side single layer (DVD-10) Double side double layer (DVD-18) (MPEG 2 Method) 133 minutes 242 minutes 266 minutes 484 minutes Single side single layer (VCD) (MPEG 1 Method) 74 minutes Single side single layer 74 minutes Table 5: Disc Symbols Symbol Meaning Number of voice languages recorded.
VM9725BT DVD/CD AUDIO OPERATION Instructions for TFT control and Insert/Eject are the same for DVD and CD operation. Please see the DVD/Disc Video Operation section for information about these topics. Media Requirements The VM9725BT will play music or other audio files from the following disc media: • CD-DA • CD-R/RW • DVD • DVD+R/RW • DVD-R/RW Upon inserting a disc, the disc and track title (if available), along with the track number and playing time appear on the screen.
VM9725BT 1. Disc icon: Touch to view the SOURCE MENU and select a new playback source. 2. Track Indicator: Displays the current track number playing and total number of tracks on disc. 3. EQ : Touch for quick access to the Equalizer level settings menu. 4. Clock: Displays the time as entered by the user in the settings menu. (Repeat) icon: Touch to alter repeat mode as follows: Repeat Single > 5. Repeat Folder > Repeat All > Repeat Off 6.
VM9725BT Playlist Screen The Playlist screen allows you to directly search for music on your disc. • Touch a track title (if available) or track number to begin playback of that track. • Touch the or icon to scroll up or down the page. • Touch the Search icon to access the Disc Search Screen. Disc Search Screen Enter the desired track the on-screen number pad. If you wish to delete an entry number touch the red X on the keypad. Press ok to play to the selected track.
VM9725BT Controlling Playback Inserting a Disc Upon inserting a CD, disc play begins. You cannot insert a disc if there is already a disc in the unit or if the power is off. Ejecting a Disc Press the EJECT ( ) button on the front of the unit to eject the disc. The unit automatically reverts to Tuner mode. You may eject a disc with the unit powered off. The unit will remain off after the disc is ejected.
VM9725BT MP3/WMA OPERATION Instructions for TFT control and Insert/Eject are the same for DVD and MP3 operation. Please see the DVD/Disc Video Operation section for information about these topics. Media and File Requirements This player allows you to play back MP3 and WMA files recorded onto CD-R/RWs, DVD+R/RWs, and DVD-R/RWs. For CD-RW discs, please make sure it is formatted using the full method and not the quick method to prevent illegal disc operation.
VM9725BT For example, a medium with the following folder/file hierarchy is subject to Folder Search, File Search or Folder Select, as shown below. The VM9725BT player will only recognize three folder levels and does not display folders containing only other folders. In the example above, the unit will display folders 3, 4, 6, and 8, but not 2 and 7 since they do not contain any tracks directly. Folder 5 is not recognized at all since it is at the fourth level.
VM9725BT MP3/WMA TFT Display The on-screen indicators and touch key areas for MP3/WMA playback are outlined below. 1. Disc icon: Touch to view the SOURCE MENU and select a new playback source. 2. Track Indicator: Displays the current track number playing and total number of tracks on disc. 3. EQ : Touch for quick access to the Equalizer level settings menu. 4. Clock: Displays the time as entered by the user in the settings menu. 5.
VM9725BT Playlist Screen The Playlist screen allows you to directly search for music, video or photo files stored on your MP3 disc/USB device. • Touch a folder to view the contents of the directory or touch a track title/file name to begin playback of that file. • Touch the or icon to scroll up or down the page. • Touch the Search icon to access the Disc Search Screen. Disc Search Screen Enter the desired track the on-screen number pad. If you wish to delete an entry number touch the red X on the keypad.
VM9725BT Search Playlist by File Type 1. Touch the MUSIC icon. 2. Touch “MUSIC,” “PHOTO” or “VIDEO”. The list of files that appear will be filtered by the type of file selected. Controlling Playback Inserting a Disc Upon inserting a MP3/WMA disc, disc play begins. You cannot insert a disc if there is already a disc in the unit or if the power is off. Ejecting a Disc Press the EJECT ( ) button on the front of the unit to eject the disc. The unit automatically reverts to Tuner mode.
VM9725BT Pausing/Resuming Playback Touch the icon to pause playback. Touch the icon to resume playback. Moving Through Tracks Touch the Next ( ) icon to advance to the next track on the MP3 disc/USB device. Touch the Previous ( ) button to move to the previous track on the MP3 disc/USB device. Repeat Playback Touch the (Repeat) icon to alter repeat mode as follows: Repeat Single > Repeat Folder > Repeat All > Repeat Off NOTE: CD-R and CD-RW will not play unless the recording session is finalized.
VM9725BT iPod®/iPhone® OPERATION NOTE: Be sure your iPod® has the latest Apple firmware installed to avoid connectivity issues. Accessing iPod® Mode This unit is Made for iPod® and iPhone®. You can control your iPod® via touch screen to access Playlist, Artist, Albums, Songs, etc.
VM9725BT Indicators/Controls The on-screen indicators and touch key areas for iPod® playback are outlined below. 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 54 iPod icon: Touch to view the SOURCE MENU and select a new playback source. 1/25 indicator: File number and total number of files on the disc. EQ icon: Touch for quick access to Equalizer level settings. Clock: Displays the time as entered by the user in the settings menu. Pandora icon: Touch to play Pandora Radio.
VM9725BT Search Menu The Search Menu allows you to search for playlists, artists, albums, songs, genres, composer, podcast or audio book. 1. 2. 3. 4. 5. 6. 7. 8. iPod icon: Touch to view the SOURCE MENU and select a new playback source. 1/25 indicator: Indicates the file number playing and total number of files in the category. EQ icon: Touch for quick access to Equalizer level settings. Clock. Displays the time as entered by the user in the settings menu.
VM9725BT Direct Track Entry To select a track directly: 1. Touch the Search icon on the Search Menu to display the direct entry menu. 2. Enter the desired track the on-screen key pad. If you wish to delete an entry number touch the red X on the keypad. Press ok to play to the selected track. To exit the screen without changing the station, touch the iPod icon in the upper right corner.
VM9725BT PANDORA RADIO OPERATION Pandora Radio is available via your iPhone® (data usage will occur) or iPod® touch (Wi-Fi). NOTE: For basic iPod®/ iPhone® connectivity, you can use the white 30-pin to USB iPod cable that came with your Apple device . For iPod® video or photo playback, you must purchase the jLink-USB cable. NOTE: The Pandora app must be installed on your iPhone®/iPod® touch.
VM9725BT 12. Station List icon: Press this icon to access the Station List Screen. 13. Elapsed Time indicator: Displays the elapsed and total playing time of the current track playing. 14. Playback Information Display: Displays station, track, artist, album, and elapsed time information. Bookmark Submenu • Touch the Bookmark this Track icon to bookmark a track. • Touch the Bookmark this Artist icon to bookmark an artist. • Touch the Cancel icon to return to the Pandora Radio screen.
VM9725BT To Launch/Stop Pandora Radio 1. Launch the Pandora app on your iPhone. The Pandora icon appears on the Main Menu Screen. 2. Touch the Pandora icon. The Pandora Screen appears. 3. Touch the icon to begin playback or the icon to pause playback. 4. Touch the iPod icon to exit Pandora and go to the iPod Search Menu.
VM9725BT Pandora Error Messages Message Displayed Cause Corrective Action BookMark Track Error Software Error The track could not be bookmarked, please try again in a moment. BookMark Artist Error Software Error The song could not be bookmarked, please try again in a moment. Thumbs Up / Down Error “Error Track Rating” Software Error Song feedback could not be sent, please try again in a moment. No Active Station Error Software Error This account has no stations in it. Please visit Pandora.
VM9725BT BLUETOOTH OPERATION Bluetooth® was launched by a special interest group (SIG) comprised of Ericsson Inc., Intel Corp., Nokia Corp., Toshiba and IBM in 1998, and it is currently developed by nearly 2,000 companies worldwide. The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Audiovox Corporation is under license. Other trademarks and trade names are those of their respective owners.
VM9725BT Bluetooth User Interface The on-screen indicators and touch key areas for Bluetooth® functions are outlined below. 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 62 BT icon: Touch to view the SOURCE MENU and select a new playback source. HTC Desire Z indicator: Name of the connected device. Clock: Displays the time as entered by the user in the settings menu. Missed Call icon: Touch to access the missed calls list. Received Call icon: Touch to access the received calls list.
VM9725BT Hands Free Profile (HFP) To use a mobile phone with this unit, it is necessary to first establish a connection using Bluetooth® wireless technology. The connection is normally established using Hands Free Profile (HFP), which gives you full control of functions available on the mobile phone source. However, depending on your mobile phone, the connection may be made using Head Set Profile (HSP), making some functions unavailable. This is a limitation of your mobile phone, not theVM9725BT.
VM9725BT 8. A prompt to pair or bond should appear on your mobile phone. Accept the request and initiate the process. NOTE: Some mobile phones require a “pass key” or pairing code to connect. If your phone requires a pass key or pairing code, you will need to enter this number. The default pairing code for many mobile phones is “0000”. The default code for the unit is “1234”. 9. A prompt to enter a PIN number or passkey for the unit should appear. The default passkey for the unit is “1234”. 10.
VM9725BT Answering an Incoming Call To answer an incoming call touch the icon. For best reception, speak loudly and icon. clearly into the microphone. To end the conversation, touch the Rejecting an Incoming Call Press the Transfer to Phone icon to reject an incoming call. The call will revert to your mobile phone and be left for voice mail.
VM9725BT Call Transfer While talking, to transfer audio from the unit back to the mobile phone, touch the Transfer to Phone icon and the following screen will appear: Pressing the Transfer to Phone icon again will return the audio from the mobile phone to the unit. Missed Calls The missed calls list retrieves the list of missed numbers from your mobile phone if your mobile phone allows the function. The last missed number is the first number on the list.
VM9725BT Received Calls The received calls list retrieves the list of numbers from your mobile phone if your mobile phone allows the function. The last received number is the first number on the list. To make a call from the received calls list, touch the call’s name and it will be dialed. Dialed Calls The dialed calls list retrieves the list of dialed numbers from your mobile phone if your mobile phone allows the function. The last dialed number is the first number on the list.
VM9725BT Phone Book The phone book is a copy of the contact list on your mobile phone which contains a listing of your important names and phone numbers. Touch the or icon to scroll up or down the contact list page. To make a call from the phone book, touch the contact’s name. Touch the on the next screen and it will be dialed.
VM9725BT Bluetooth Music Function Bluetooth® provides an Advanced Audio Distribution Profile (A2DP) profile for streaming music from a mobile phone or a portable multimedia player (PMP), sometimes referred to as a MP3 player. The unit allows you to play back audio files from your mobile phone or a PMP using a Bluetooth® connection. NOTE: Please quit A2DP mode before attempting to make a phone call, as unexpected results may occur depending on your mobile phone model.
VM9725BT SiriusXM® RADIO OPERATION Everything worth listening to is on SiriusXM®, getting over 130 channels, including the most commercial-free music, plus the best sports, news, talk and entertainment. A Vehicle Tuner (sold separately) and subscription are required. For more information, visit www.siriusxm.com. Sirius, XM and all related marks and logos are trademarks of Sirius XM Radio Inc. and its subsidiaries. All other marks and logos are the property of their respective owners. All rights reserved.
VM9725BT SiriusXM® User Interface The on-screen indicators and touch key areas for SiriusXM® functions are outlined below. Menu Page 1 Menu Page 2 Menu Page 1 1. SXM icon: Touch to view the SOURCE MENU and select a new playback source. 2. Band indicator - Displays SiriusXM® radio band currently selected. 3. Equalizer setting indicator: Displays the current equalizer preset setting. : Touch for quick access to the Equalizer level settings menu. 4. EQ 5.
VM9725BT Menu Page 2 13. Back icon: Touch to go to Menu Page 1. 14. CHG PW icon: Touch to go to the change password screen. 15. Mem icon: Touch to display screen used to enter current channel into preset memory. 16. Scan icon: Touch to scan to the next available channel. The tuner will pause for approximately five seconds at that channel. Touch scan again to listen to that channel. If scan is not touched, the tuner will automatically seek the next channel. 17.
VM9725BT Using Preset Stations Ten numbered preset buttons store and recall channels for each band. All ten stored channels for the current band appear on the screen. Storing a Channel 1. Select a band (if needed), then select a channel. 2. On the SiriusXM® menu page 2, touch the Mem icon to access the Preset Screen. 3. Touch the preset number (P1 through P10) in which you would like to store the current channel (or touch the X icon to cancel and close the menu).
VM9725BT Searching for a Channel Search by Channel To search by channel: 1. On the SirusXM® menu page 1, touch the Category/Channel icon (if needed) to select Channel. 2. Touch List to display the Channel Screen: 3. Touch a channel to tune to that channel. Search by Category Categories group music by type such as jazz, rock, classical, etc. To search by category: 1. On the SirusXM® menu page 1, touch the Category/Channel icon (if needed) to select Category. 2.
VM9725BT SXM Mature Channel Lock SiriusXM® attaches a label to channels with adult content. The radio recognizes these channels as “Mature”. The Mature Channel Lock option allows you to lock out channels with “Mature” labels. These channels will still appear in the channel listing (with a lock symbol), but will not be tunable unless the parental lockout password is correctly entered. Lock Mature Channels To lock mature channels: 1. On the SirusXM® menu page 2, touch the Lock icon.
VM9725BT Temporarily Unlock a Mature Channel When the global “Mature Lock” is enabled, a mature channel can be temporarily unlocked ONLY until the key is cycled. Once the radio is powered on again, the channel will be locked again. This mode is useful for listening to mature/adult content on a temporary basis, allowing you to listen on a channel-by-channel basis without having to disable the global “Mature Lock” of all mature channels. To temporarily unlock a mature channel: 1. Tune to a mature channel.
VM9725BT Unlock All Mature Channels To unlock all mature channels: 1. On the SirusXM® menu page 2, touch the Lock icon. The following screen appears: 2. Enter your 4-digit password and then press the ok icon. The following screen appears: 3. Touch the Unlock ALL icon. The mature channels are now unlocked.
VM9725BT Change Lock Password The Change Lock Password option allows you to change the password from the default or current custom password to another password. NOTE: The default password is 0, 0, 0, 0. To change a password: 1. Touch the CHGPW icon. The following screen appears: 2. Enter your 4-digit password and press the ok icon. 3. Enter the new 4-didit password and press the ok icon. The new password is set.
VM9725BT SiriusXM® Radio Advisory Messages SiriusXM® user advisory messages are listed below: Advisory Displayed Cause Check Tuner Check the SiriusXM® tuner connection on the back of the unit to ensure that it’s correctly connected. Check Antenna Ensure the SiriusXM® antenna cable is connected to the SiriusXM® tuner correctly. Check the SiriusXM® antenna wire for breaks or sharp bends. Replace the antenna if necessary. If the message remains, the antenna may have been damaged.
VM9725BT REAR CAMERA OPERATION This unit is “camera ready.” Before accessing any camera features, you must install a rear video camera. When the camera is not installed and the function is accessed by the gear selector being placed in reverse or by the unit’s menu, the message “VIDEO NOT DETECTED” will appear, indicating the function is not available. When the camera is installed, the rear view image of what is behind the vehicle will appear when the vehicle is placed in reverse gear.
VM9725BT TROUBLESHOOTING Table 6: Troubleshooting Problem Cause Corrective Action Radio Fuse blown Install a new fuse with the correct rating Car battery fuse blown Install a new fuse with the correct rating Illegal operation Press the RESET button located over the rotary encoder on the front panel Improper audio output connection Check wiring and correct Volume set too low Increase volume level Improper “MUTE” connection Review wiring diagram and check “MUTE” connection Speakers damaged Rep
VM9725BT Problem Cause Corrective Action Incorrect connection to parking brake wire Check wiring and correct Parking brake is not engaged Stop vehicle in safe place and apply parking brake Flashing image or interference appears on screen DVD is not compatible with current TV system settings Change setup to accommodate disc Improper video signal connections Check wiring and correct Prolonged image or improper height/ width ratio display Improper aspect ratio setup Use correct aspect ratio setti
VM9725BT Problem Cause Corrective Action Disc does not play back Disc is warped or scratched Use disc in good condition Disc is dirty or wet Clean disc with soft cloth Laser pickup is dirty Clean laser pickup with cleaning disc Incompatible disc is used Use compatible disc Disc rating exceeds Parental Lock rating limit Change Parental Lock settings to lower restriction Disc region code is not compatible with unit Use disc with proper region code Disc is inserted upside down Insert disc with
VM9725BT Disc Error Messages Message Displayed Cause Loading Disc is being read No Disc Disc is dirty Clean disc with soft cloth Disc is upside down Insert disc with label side up Disc not present in loading compartment Insert disc Disc is dirty Clean disc with soft cloth Disc is upside down Insert disc with label side up Bad Disc Corrective Action Unknown disc Disc format is not Use compatible disc compatible with this unit Region Error DVD is not compatible with region code of unit Us
VM9725BT Care and Maintenance 1. 2. 3. 4. 5. 6. 7. 8. Use only a clean silicone cloth and neutral detergent to clean the front panel or monitor. A rough cloth and non-neutral detergent (such as alcohol) may result in scratching or discoloration. Do not get water or cleaning fluids on the unit. If the temperature inside the player gets too hot, a protective circuit automatically stops play of the disc. If this occurs, allow the unit to cool before operating the player again.
VM9725BT SPECIFICATIONS DVD/CD Player Compatible Disc Media: DVD + R / RW (Single and Dual Layer) and CD-R / RW Compatible Media Formats: CD-DA, MP3, WMA, VCD, SVCD, Xvid, AVI, MPEG 1/2 Signal to Noise Ratio: >95dBA Dynamic Range: >95dB Frequency Response: 20Hz to 20 kHz, -3dB Channel Separation: > 60dB @ 1 kHz D/A Converter: High performance 24-bit / 192 kHz sample rate, Multi-Bit SigmaDelta Modulator Video Format: NTSC, PAL (auto-detection) Output: 1Vp-p (75-ohm) Input: 1Vp-p (75-ohm) FM Tuner Tuning Ra
VM9725BT General Auxiliary Input impedance: 10k Power Supply: 11 to 16VDC, negative ground Power Antenna (Blue): 500mA max, current limited protection Amplifier Remote (Blue/White): 500mA max, current limited protection Operating Temperature: -20C ~ 65C Fuse: 15-amp, mini ATO type DIN chassis dimensions: 7” X 7” X 4” (178mm x 178mm x 100mm) CEA Power Ratings Power Output: 13 Watts RMS x 4 channels into 4-Ohms @ < 1% THD+N Signal to Noise Ratio: 70dBA below reference (Reference: 1 Watt, 4-Ohms) Frequency Re
Audiovox Electronics Corporation Hauppauge, NY 11788 Technical Assistance: 1-800-323-4815 www.mobile.jensen.
Installation Guide VM9725BT What’s in the Box Tools and Supplies 90 %7 +HDG 8QLW /HIW DQG 5LJKW 'RXEOH ',1 0RXQWLQJ %UDFNHWV 'RXEOH ',1 +DOI 6OHHYH ,QVWDOO %UDFNHW 7ZR &XVWRP &RVPHWLF 7ULP 5LQJV 3DUNLQJ %UDNH :LUH +DUGZDUH %DJ 6SHDNHU 2XWSXW +DUQHVV 3RZHU ,QSXW +DUQHVV $FFHVVRU\ +DUQHVV ,QVWDOODWLRQ *XLGH ([WHUQDO 0LFURSKRQH You will need these tools and supplies to install your VM9725BT: • Torx type, flat-head and Philips screwdrivers • Wire cutters and strippers • Tools to remove existi
Optional Equipment • Rear Camera Disconnecting the Battery • To prevent a short circuit, be sure to turn off the ignition and remove the negative (-) battery cable prior to installation. NOTE: If the VM9725BT is to be installed in a car equipped with an on-board drive or navigation computer, do not disconnect the battery cable. If the cable is disconnected, the computer memory may be lost. Under these conditions, use extra caution during installation to avoid causing a short circuit.
Installation Using Half-Sleeve 1. Install half-sleeve in the dashboard. a. Install adapter if necessary (optional). b. Install half-sleeve into adapter or dashboard (use only the supplied screws). Do not force the sleeve into the opening or cause it to bend or bow. WARNING! Only connect the unit to a 12-volt power supply with proper grounding. c. Locate the series of bend-tabs along the top, bottom and sides of the mounting sleeve.
Wiring Diagram *4=- /:--6 A-447? CAUTION! IMPORTANT: Incorrect wiring connections can damage the unit. Follow the wiring instructions carefully, or have the installation handled by an experienced technician. Need Help? For technical assistance, call the Jensen customer support line at 1-800-323-4815.
VM9725BT Navigation Operating Instructions 160 watts peak 40W x 4
VM9725BT This page intentionally left blank.
VM9725BT WARNINGS AND PRECAUTIONS WARNING! Please read and follow the following safety precautions. Failure to follow the instructions below may increase your risk of collision and personal injury. The Attention - Please Drive Safely! Screen is displayed each time the iGo primo software is turned ON as a reminder to make use of the system’s navigational aids in a safe manner. Before using the software, read this entire manual.
VM9725BT iGo primo software provides turn-by-turn visual and voice assistance to direct you to your selected destination. The software quickly calculates step-by-step directions to any destination available on the included navigation map. The iGo primo software uses Global Positioning System (GPS) satellites, and a digital roadway map database to calculate and display travel directions.
VM9725BT SAFETY INFORMATION User Agreement When the unit is first turned on, you will see the following message, warning you to operate your navigation system appropriately: You must agree to the above notice before using the navigation software. Tap to proceed to the Navigation Menu.
VM9725BT Driver Safety Rules The following safety rules must be followed to prevent accidents that can result in injury or death to yourself or others: The driver should operate the device only when the vehicle is stopped. Only a vehicle passenger should operate the device while the vehicle is moving. When driving, the need to view the display is minimal. Voice prompts will guide you to your destinations. It is your responsibility to comply with all traffic laws.
VM9725BT WARNINGS AND PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Vehicle Position . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Map Information and Database . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 SAFETY INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 User Agreement . .
VM9725BT MODIFYING THE ROUTE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .93 Selecting a New Destination When Already Having a Route . . . . . . . . . . . . .93 Setting a New Starting Position for the Route . . . . . . . . . . . . . . . . . . . . . . . . . .94 Editing the List of Destinations (Edit Route) . . . . . . . . . . . . . . . . . . . . . . . . . . . .96 Pausing the Active Route . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
VM9725BT QUICK START GUIDE Follow these six easy steps and you are on your way. NOTE: Before operating your iGo Primo software, please carefully read and follow the instructions provided in the “Warnings and Precautions” section of this manual. Step 1 - Access the navigation function: You can access the navigation function by pressing the front panel NAV button. Step 2 - Start Up: After the iGo primo software starts, you will see the reminder warning to use your iGo primo software safely and lawfully.
VM9725BT Step 4 - Select a Destination: You have many ways to select a destination. Select by touching screen: to select your destination by entering an address or selecting • Tap a place of interest, a location on the map or one of your Favorite destinations. You can also look up your recent destinations from the Smart History, enter a coordinate or use the location saved in a photo. to display the route parameters and the route in its full • Tap length on the map.
VM9725BT Step 6 - Arriving at Your Destination When you are near your destination, the destination is indicated by a checkered flag symbol . Refer to the rest of this manual to become more familiar with the many options available on your iGo primo software.
VM9725BT INTRODUCTION We hope that you enjoy using your new navigation system. This manual is designed to help you get the most out of your system. This navigation system leads you straight to your destination. You can navigate and plan your route with an easy-to-use and intuitive interface, plan your trip to suit your personal preferences and interests, and find and save (bookmark) interesting destinations before you begin your trip.
VM9725BT About GPS and GNSS The unit uses a vehicle Global Positioning System (GPS)-based navigation device which uses digital map data to guide you from your selected location A to location B, using location information obtained from a Global Navigation Satellite System (GNSS).
VM9725BT Acquiring a Satellite Signal The initial GPS location lock is best established when your vehicle is parked. If the device is in motion, the signal can take longer to initially connect. Once the initial coordinates are established, the software will follow you as you move and navigate. Drive your vehicle to an open area where the GPS signal can be clearly received and park the vehicle. If the device is in motion, the signal can take longer to initially connect.
VM9725BT GETTING STARTED iGO primo is optimized for in-car use. There is no need to use a stylus. You can use it easily by tapping the screen buttons and the map with your fingertips. Accessing the Navigation Software Press the MENU button and touch the Navigation icon to access navigation mode. Adjusting the Navigation Voice Volume While the Navigation is on and a route has been programmed, the Navigation will speak commands.
VM9725BT INITIAL SETUP When using the navigation software for the first time, an initial setup process starts automatically. Do as follows: 1. Select the written language of the application interface. Later you can change it in Regional settings. 2. Read the End User License Agreement. Tap to continue. to continue. 3. The Configuration Wizard starts. Tap 4. Select the language and speaker used for voice guidance messages. Later you can change it in Sound and Warnings settings.
VM9725BT 5. If needed, modify the time format and unit settings. Later you can change them in Regional settings. 6. If needed, modify the default route planning options. Later you can change them in Route settings. 7. The initial setup is now complete. The Configuration Wizard can be restarted later from the Settings menu. After the initial setup, the Navigation Menu appears and you can start using iGO primo.
VM9725BT NAVIGATION MENU You can reach all parts of iGO primo from the Navigation Menu. You have the following options: • Tap to select your destination by entering an address or selecting a place of interest, a location on the map or one of your Favorite destinations. You can also look up your recent destinations from the Smart History, enter a coordinate or use the location saved in a photo. • Tap to display the route parameters and the route in its full length on the map.
VM9725BT BUTTONS AND OTHER CONTROLS ON THE SCREEN When you are using iGO primo, you usually tap buttons on the touch screen. You only need to confirm selections or changes if the application needs to restart, it needs to perform a major reconfiguration, or you are about to lose some of your data or settings. Otherwise, iGO primo saves your selections and applies the new settings without confirmation as soon as you use the controls.
VM9725BT List When you need to select from several options, they appear in a list. Grab the list anywhere and slide your finger up or down. Depending on the speed of the sliding, the list will scroll fast or slow, only a bit or until the end. Alternatively, move between pages with the and buttons and tap the value that you want. Radio button When there are only Tap one of the a few choices, radio buttons to select a buttons may be new value. used instead of lists. Only one value can be selected.
VM9725BT Using Keyboards You only need to enter letters or numbers when you cannot avoid it. You can type with your fingertips on the full-screen keyboards and you can switch between various keyboard layouts, for example English, Greek or numerical. Task Switching to another keyboard layout, for example from an English keyboard to a Greek keyboard. Correcting your entry on the keyboard. Instruction button and Tap the select the new keyboard layout from the list. to remove the unneeded Tap character(s).
VM9725BT Beyond Single Screen Tap You usually need to tap the screen only once. However, some useful features can be accessed with combined touch screen tapping. Those are the following: Action Details Tapping and holding the Tap and keep pressing the following buttons to reach screen. extra functions: on list and menu • Tap and hold screens: the Map screen appears. • Tap and hold any of the , , , , , and buttons on the Map screen: you can rotate, tilt or scale the map continuously.
VM9725BT MAP SCREEN The Map screen is the most frequently used screen of iGO primo. Navigating On the Map A small live map is displayed on the startup screen, the Navigation Menu, as a part of the button. To enlarge this small map and open the Map screen, tap . This map shows the current position (the Vehimarker, a red arrow by default), the recommended route (an orange line), and the surrounding map area. When there is no GPS position, the Vehimarker is transparent. It shows your last known position.
VM9725BT When GPS position is available, the Vehimarker is displayed in full color, now showing your current position. There are screen buttons and data fields on the screen to help you navigate. During navigation, the screen shows route information. By default, only one data field is displayed in the bottom right corner. Tap this field to see all route data fields. Tap any of the data fields to suppress others and display only the selected one.
VM9725BT Default data fields when cruising without a destination (tap and hold any of the fields to change its value): Field Description Shows your current speed given by the GPS receiver. Shows the speed limit of the current road if the map contains it. Shows the current time corrected with time zone offset. The accurate time comes from the GPS satellites, and the time zone information comes from the map or it can be set manually in Regional settings.
VM9725BT Position Markers Vehimarker and Lock-on-Road When your GPS position is available, iGO primo marks your current position with the Vehimarker. By default, this marker is a red arrow, but you can change this icon in Settings. The exact location of the Vehimarker depends on the vehicle type used for route calculation. The vehicle type can be selected in Route settings. • If you choose pedestrian: The Vehimarker is at your exact GPS position. The direction of the icon shows your current heading.
VM9725BT Objects On the Map Streets and Roads iGO primo shows the streets in a way that is similar to how the paper road maps show them. Their width and colors correspond to their importance: you can easily tell a freeway from a small street. Turn Preview and Next Street When navigating a route, the top section of the Map screen shows information about the next route event (maneuver) and the next street or the next city/town. There is a field in the top left corner that displays the next maneuver.
VM9725BT Most of these icons are very intuitive. The following table lists some of the frequently shown route events. The same symbols are used in both fields: Icon Description Turn left. Turn right. Turn back. Bear right. Turn sharp left. Keep left. Continue straight in the intersection. Go left on the traffic circle, 3rd exit (next maneuver). Enter traffic circle (second next maneuver). Enter freeway. Exit freeway. Board ferry.
VM9725BT Leave ferry. Approaching a waypoint. Approaching the destination. Lane Information and Signposts When navigating on multilane roads, it is important to take the appropriate lane in order to follow the recommended route. If lane information is available in the map data, iGO primo displays the lanes and their directions using small arrows at the bottom of the map. Highlighted arrows represent the lanes you need to take. Where additional information is available, signposts substitute arrows.
VM9725BT Junction View If you are approaching a freeway exit or a complex intersection and the needed information exists, the map is replaced with a 3D view of the junction. The lanes you need to take are displayed with arrows. Signposts can also be present if information is available.
VM9725BT Elements of the Active Route iGO primo shows the route in the following way: Symbol Name Description Current GPS position and Start point Your current position displayed on the map. • In pedestrian mode it is the exact GPS position. • If a vehicle is selected for route calculation and roads are near, the symbol is snapped onto the nearest road. Normally if GPS position is available, the route starts from the current position.
VM9725BT Manipulating the Map Tap the map anywhere to browse it during navigation. The map stops following the current position (the Vehimarker, a red arrow by default, is not locked in a fix position on the screen any more) and control buttons appear to help you modify the map view.
VM9725BT Action Button(s) Description Moving the map with drag & drop. No buttons You can move the map in any direction: tap and hold the map, and move your finger towards the direction you want to move the map. Zooming in and out Tilting up and down Rotating left and right Changes how much of the map is displayed on the screen. iGO primo uses high-quality vector maps that let you examine the map at various zoom levels, always with optimized content.
VM9725BT Compass in 2D map view mode Compass in 3D map view mode , , The direction of the compass shows North. Tap the button to switch to North-up view, and then tap again to rotate the map in the previous direction. The direction of the compass shows North. Tap the button to switch to North-up view, and then tap again to rotate the map in the previous direction. Location information Tap this button to open a new screen with information about the selected map point, the Cursor.
VM9725BT Quick Menu The Quick menu is a selection of controls and functions that are frequently needed during navigation. It can be opened directly from the Map screen by tapping . The menu will close after a few seconds of inactivity or if you tap . The menu will also close if you initiate simple controls like muting the device. In other cases tapping a button will open a new screen with options. Most of these functions are shortcuts. They are accessible from the menu system.
VM9725BT There are more functions available than the number of buttons in the menu. In Settings, you can choose the function of each button. The following options are available: Button Description Shortcut for: Master Volume slider This slider adjusts the sound volume of the device. All sounds of the application are affected. More / Settings / Sound and Warnings / Volume / Master slider This switch mutes all sounds of the device. Tap again to reenable sounds.
VM9725BT This button opens a special n/a screen with information about the current position and a button to search for nearby emergency or roadside assistance. For details, see the next chapter. This button cancels the route and stops navigation. The button is replaced with the next one if waypoints are given. My Route / Cancel Route This button skips the next waypoint from the route. n/a This button opens a 2D map scaled and positioned to show the entire route.
VM9725BT With this function you can My Route / More / Load replace the active route with a Route previously saved route. 38 With this function you can search for Places of Interest in various different ways. Find / Find Places This button opens the Map screen and starts simulating the active route. My Route / More / Simulate Navigation This button opens the GPS Information screen with satellite position and signal strength information. Tap the top of the Map screen when there is no GPS reception.
VM9725BT Checking the Details of the Current Position (Where Am I?) Opened from the Quick menu, this screen contains information about the current position (or about the last known position if GPS reception is not available) and a button to search for useful Places nearby. Information On This Screen: • and : Latitude and Longitude (coordinate of the current position in WGS84 format). • : Altitude (elevation information coming from the GPS receiver - often inaccurate). • : House number on the left.
VM9725BT You can also perform some actions on this screen: Tap to save the current position as a Favorite destination. You can also search for assistance near your current position.
VM9725BT NAVIGATING You can set up your route in different ways: • If you need a route for immediate navigation, you can select the destination and start navigating to it right away (normal navigation). • You can also plan a route independently of your current GPS position or even without GPS reception (to achieve this, you need to turn off the GPS receiver and set a new starting point in My Route / Edit Route by tapping the flag icon at the current position). You can plan routes with multiple destinations.
VM9725BT Entering an Address (United States) To enter an address as the destination, do as follows: 1. If you are on the Map screen, tap Navigation menu. to return to the , 2. In the Navigation menu, tap the following buttons: 3. By default, iGO primo proposes the country and state where you are. If needed, , enter the first few letters of the destination country or tap state on the keyboard, and select one from the list.
VM9725BT • If the desired name does not show up, the names that match the string appear in a list after entering a couple of characters (to open the list of results before it appears automatically, tap town from the list. ). Select the city/ 5. Enter the street name: . a. Tap b. Start entering the street name on the keyboard. c. Find the street you need: • The most likely street name is always shown in the input field. To accept it, tap .
VM9725BT 6. Enter the house number: . a. Tap b. Enter the house number on the keyboard. (To enter letters, tap ). to finish entering the address. (If the entered house c. Tap number cannot be found, the midpoint of the street is selected as the destination.) 7. A full screen map appears with the selected point in the middle. If necessary, tap the map somewhere else to modify the destination. The Cursor ( appears at the new location.
VM9725BT 8. After a short summary of the route parameters, the map appears showing the entire route. The route is automatically calculated. Tap your journey. to modify route parameters, or tap and start Tip! If you know that you will use this destination frequently, before tapping Favorites first: tap to confirm the destination, put it on the list of your then , give a name for the new to save the location. The map with the destination Favorite, and tap returns automatically.
VM9725BT Entering an Address (Canada) To enter an address as the destination, do as follows: 1. If you are on the Map screen, tap to return to the Navigation menu. , . 2. In the Navigation menu, tap the following buttons: 3. By default, iGO primo proposes the country, state and city where you are. If , enter the first few letters of the destination needed, tap country or state on the keyboard, and select one from the list.
VM9725BT • If the desired name does not show up, the names that match the string appear in a list after entering a couple of characters (to open the list of results before it appears automatically, tap town from the list. ). Select the city/ 5. Enter the street name: a. Tap . b. Start entering the street name on the keyboard. c. Find the street you need: • The most likely street name is always shown in the input field. To accept it, tap .
VM9725BT 6. Enter the house number: . a. Tap b. Enter the house number on the keyboard. (To enter letters, tap ). to finish entering the address. (If the entered house c. Tap number cannot be found, the midpoint of the street is selected as the destination.) 7. A full screen map appears with the selected point in the middle. If necessary, tap the map somewhere else to modify the destination. The Cursor ( appears at the new location.
VM9725BT 8. After a short summary of the route parameters, the map appears showing the entire route. The route is automatically calculated. Tap your journey.
VM9725BT Entering an Address Starting with the Street Name (in the United States only) You can leave the city/town name empty and start the search with the street name. This way you can search in all streets of a state. Do as follows: to return to the If you are on the Map screen, tap Navigation menu. 2. In the Navigation menu, tap the following buttons: , . 3. By default, iGo primo proposes the country and state where you are.
VM9725BT • If the desired name does not show up, the names that match the string appear in a list after entering a couple of characters (to open the list of results before it appears automatically, tap from the list. ). Select the street 5. Enter the house number: a. Tap . b. Enter the house number on the keyboard. (To enter letters, tap ). to finish entering the address. (If the entered house c. Tap number cannot be found, the midpoint of the street is selected as the destination.) 6.
VM9725BT 7. After a short summary of the route parameters, the map appears showing the entire route. The route is automatically calculated. Tap journey.
VM9725BT Entering the Midpoint of a Street as the Destination You can navigate to the midpoint of a street if the house number is not available: 1. If you are on the Map screen, tap to return to the Navigation menu. 2. In the Navigation menu, tap the following buttons: 3. Select the country, state and city as described earlier. 4. Enter the street name: , . . a. Tap b. Start entering the street name on the keyboard. c.
VM9725BT 5. Instead of entering the house number, tap street is selected as the destination. . The midpoint of the 6. A full screen map appears with the selected point in the middle. If necessary, tap the map somewhere else to modify the destination. The Cursor ( appears at the new location. Tap ) to confirm the destination, to select a different destination. or tap 7. After a short summary of the route parameters, the map appears showing the entire route. The route is automatically calculated.
VM9725BT Selecting an Intersection as the Destination To enter an address as the destination, do as follows: 1. If you are on the Map screen, tap to return to the Navigation menu. 2. In the Navigation menu, tap the following buttons: 3. Select the country, state and city as described earlier. 4. Enter the street name: , . a. Tap . b. Start entering the street name on the keyboard. c. Find the street you need: • The most likely street name is always shown in the input field. .
VM9725BT 5. Enter the intersecting street name: . Tap • If only a few intersecting streets exist, their list appears immediately. • In case of a longer street, the keyboard screen appears. Start entering the name of the intersecting street on the keyboard. As soon as the street names that match the entered string can be shown on one screen, their list appears automatically. Select from the list. 6. A full screen map appears with the selected point in the middle.
VM9725BT 7. After a short summary of the route parameters, the map appears showing the entire route. The route is automatically calculated. Tap your journey.
VM9725BT Selecting a City/Town Center as the Destination The city/town center is not the geometric center of the city but an arbitrary point the map creators have chosen. In towns and villages, it is usually the most important intersection; in larger cities, it is one of the important intersections. to return to the If you are on the Map screen, tap Navigation menu. 2. In the Navigation menu, tap the following buttons: 3. Select the country and state as described earlier. 4.
VM9725BT 5. Instead of entering the street name, tap . This way the center of the displayed city/town becomes the destination of the route. 6. A full screen map appears with the selected point in the middle. If necessary, tap the map somewhere else to modify the destination. The Cursor ( appears at the new location. Tap ) to confirm the destination, to select a different destination. or tap 7. After a short summary of the route parameters, the map appears showing the entire route.
VM9725BT Entering an Address with a ZIP Code 1. All of the above address searching possibilities can be performed with entering the ZIP code instead of the city name. Find below an example with a full address: to return to the If you are on the Map screen, tap Navigation menu. 2. In the Navigation menu, tap the following buttons: 3. Select the country and state as described earlier. 4. Enter a new city/town using its ZIP code: 1. a. Tap , . to open the numeric keypad. b. Tap c.
VM9725BT 5. Enter the street name: . a. Tap b. Start entering the street name on the keyboard. c. Find the street you need: • The most likely street name is always shown in the input field. . To accept it, tap • If the desired name does not show up, the names that match the string appear in a list after entering a couple of characters (to open the list of results before it appears automatically, tap from the list. ). Select the street 6. Enter the house number: . a. Tap b.
VM9725BT 7. A full screen map appears with the selected point in the middle. If necessary, tap the map somewhere else to modify the destination. The Cursor ( appears at the new location. Tap ) to confirm the destination, to select a different destination. or tap 8. After a short summary of the route parameters, the map appears showing the entire route. The route is automatically calculated. Tap your journey.
VM9725BT Tips on Entering Addresses Quickly When you are entering the name of a city/town or a street: • Only those letters are offered on the keyboard that appear in possible search results. All other characters are grayed out. • As you are typing, the most likely result is always displayed in the input field. If the guess is correct, tap to select it. • After entering a couple of letters, tap the specified letters.
VM9725BT Selecting the Destination from the Places of Interest You can select your destination from the Places of Interest included with iGo primo. Using the same screen, you can find a Place in different ways: • with the Quick search feature, you can quickly find a nearby Place by its name • with the Preset search feature, you can find frequently searched types of Places with only a few screen taps • you can search for a Place by its category • you can search for a Place by its name.
VM9725BT 4. (Optional) The Places in the list are ordered by the length of the necessary detour (when navigating a route) or by their distance from the current position (when no destination is given). . If you need to reorder the list, tap 5. Browse the list if necessary and tap one of the list items. A full screen map appears with the selected point in the middle. The name and address of the Place is displayed at the top of the screen. to see the details of the selected Place. Tap 6.
VM9725BT Searching for a Place of Interest Using Preset Categories The Preset search feature lets you quickly find the most frequently selected types of Places. 1. If you are on the Map screen, tap to return to the Navigation menu. , . 2. In the Navigation menu, tap the following buttons: 3. The preset search categories appear: • If an active route exists, gas stations are searched along the route. • If there is no active route (destination is not selected), they are searched around the current position.
VM9725BT 4. Tap any of the quick search buttons to get an instant list of Places. 5. (Optional) The Places in the list are ordered by their distance from the current or last known position, from the destination or by the length of the necessary detour. If you need to reorder the list, tap . 6. Browse the list if necessary and tap one of the list items. A full screen map appears with the selected point in the middle. The name and address of the Place is displayed at the top of the screen.
VM9725BT 9. After a short summary of the route parameters, the map appears showing the entire route. The route is automatically calculated. Tap your journey.
VM9725BT Searching for a Place of Interest by Category You can search for Places of Interest by their categories and subcategories. 1. If you are on the Map screen, tap to return to the Navigation menu. 2. In the Navigation menu, tap the following buttons: , . 3. Tap . 4. Select the area around which the Place should be searched for: • Tap to search around the current position or if it is not available, around the last know position. (The result list will be ordered by the distance from this position.
VM9725BT 5. (Optional) If you have selected in. , select the city/town to search 6. Select one of the main Place categories (e.g. Accommodation) or tap route. to list all Places around the selected location or along the 7. Select one of the Place subcategories (e.g. Hotel or Motel) or tap to list all Places in the selected main category around the selected location or along the route.
VM9725BT 8. Sometimes the list of brands in the selected Place subcategory appears. Select to list all Places in the selected subcategory one brand or tap around the selected location or along the route. 9. Finally, the results appear in a list. 10. (Optional) The Places in the list are ordered by their distance from the current or last known position, from the selected city/town, from the destination or by the length of the necessary detour. . If you need to reorder the list, tap 11.
VM9725BT 14. After a short summary of the route parameters, the map appears showing the entire route. The route is automatically calculated. Tap your journey.
VM9725BT Searching for a Place of Interest by Name You can search for Places of Interest by their names. You can search around different locations or along your route in the whole Place database or in one Place category or subcategory only. to return to the If you are on the Map screen, tap Navigation menu. 2. In the Navigation menu, tap the following buttons: 1. , . . 3. Tap 4.
VM9725BT 5. (Optional) If you have selected in. , select the city/town to search 6. Tap to search in all Places, or select one of the main Place categories (e.g. Accommodation) to search in. 7. Tap to search in the selected Place category or select one of the Place subcategories (e.g. Hotel or Motel) to search in.
VM9725BT 8. Tap if you have not done it before. 9. Using the keyboard, start entering the name of the Place. 10. After entering a few letters, tap to open the list of Places with names containing the entered character sequence. 11. (Optional) The Places in the list are ordered by their distance from the current or last known position, from the selected city/town, from the destination or by the length of the necessary detour. If you need to reorder the list, tap .
VM9725BT 12. Browse the list if necessary and tap one of the list items. A full screen map appears with the selected point in the middle. The name and address of the Place is displayed at the top of the screen. to see the details of the selected Place. Tap 13. (Optional) Tap to return to the map. 14. If necessary, tap the map somewhere else to modify the destination. The Cursor ( ) appears at the new location. Tap to confirm the to select a different destination. destination, or tap 15.
VM9725BT Selecting Nearby Assistance from ‘Where Am I?’ You can quickly search for nearby assistance from the ‘Where Am I?’ screen. 1. On the Map screen, tap 2. Tap to open the Quick menu. , and then . 3.
VM9725BT 4. Tap any of the quick search buttons to get an instant list of that type of Places. 5. (Optional) The Places in the list are ordered by their distance from the current or last known position, from the selected city/town, from the destination or by the length of the necessary detour. . If you need to reorder the list, tap 6. Browse the list if necessary and tap one of the list items. A full screen map appears with the selected point in the middle.
VM9725BT 8. If necessary, tap the map somewhere else to modify the destination. The Cursor ( ) appears at the new location. Tap to confirm the destination, or tap to select a different destination. 9. After a short summary of the route parameters, the map appears showing the entire route. The route is automatically calculated. Tap your journey.
VM9725BT Selecting a Map Location as the Destination 1. If you are on the Map screen, tap to return to the Navigation menu. 2. In the Navigation menu, tap the following buttons: , . 3. Locate your destination on the map: move and scale the map as needed. 4. Tap the location that you want to select as your destination. The Cursor ( ) appears. 5. Tap to select the Cursor as the destination. 6. After a short summary of the route parameters, the map appears showing the entire route.
VM9725BT Selecting the Destination from Your Favorites You can select a location that you have already saved as a Favorite to be your destination. 1. Access the list of Favorites: and then tap . • If you are on the Map screen, tap • If you are in the Navigation menu, tap 2. The list of Favorite destinations is displayed. and then tap . 3. Tap the Favorite that you want to set as your destination.
VM9725BT 5. After a short summary of the route parameters, the map appears showing the entire route. The route is automatically calculated. Tap your journey.
VM9725BT Selecting One of the Most Likely Destinations (Smart History) The destinations that you have set earlier appear in the History list. Two of those recent destinations are shown in the Destination menu for easy access. Smart History offers these locations based on your navigation habits, using parameters like the current time of day, the day of week, and the current location. The more you use the navigation software, the better it can guess your desired destination.
VM9725BT 5. After a short summary of the route parameters, the map appears showing the entire route. The route is automatically calculated. Tap your journey.
VM9725BT Selecting a Recent Destination from the History The destinations that you have set earlier appear in the History. 1. Access the History: • If you are on the Map screen, tap and then tap . • If you are in the Navigation menu, tap and then tap . 2. The list of recent destinations appear. Smart History promotes three destinations to the first page based on your previous routes (most likely destinations). The rest of the destinations are ordered by time they were last selected.
VM9725BT 5. After a short summary of the route parameters, the map appears showing the entire route. The route is automatically calculated. Tap your journey.
VM9725BT Entering the Coordinates of the Destination You can also select a destination by entering its coordinate. Do as follows: to return to the 1. If you are on the Map screen, tap Navigation menu. 2. In the Navigation menu, tap . 3. Open the menu and tap . 4. You can enter the latitude and longitude values in any of the following formats: decimal degrees; degrees and decimal minutes; or degrees, minutes and decimal seconds. 5. (Optional) If necessary, tap coordinate in UTM format. 6.
VM9725BT 7. A full screen map appears with the selected point in the middle. The Cursor ( ) appears at the new location. Tap to confirm the destination, or tap to select a different destination. 8. After a short summary of the route parameters, the map appears showing the entire route. The route is automatically calculated.
VM9725BT Building a Route from the List of Destinations (Create Route) You can also build your route destination by destination from the My Route menu. 1. If you are on the Map screen, tap Navigation menu. 2. In the Navigation menu, tap 3. Tap to return to the . . 4. There is only one line in the list of route points, the start point of the route, normally the current GPS position. to select the destination. 5. Tap 6.
VM9725BT 7. When the new destination is selected, the list returns. 8. To add more destinations, tap where you want to insert the new route point in the list, and repeat the above procedure.
VM9725BT VIEWING THE ENTIRE ROUTE ON THE MAP It is easy to get a map overview of the active route. Do as follows: If you are on the Map screen, tap Navigation menu. 2. In the Navigation menu, tap to return to the 1. . . The active route is displayed in its full length on the map 3. Tap together with additional information and controls.
VM9725BT CHECKING ROUTE PARAMETERS AND ACCESSING ROUTE RELATED FUNCTIONS You can check different parameters of the route recommended by iGo primo. 1. If you are on the Map screen, tap to return to the Navigation menu. . 2. In the Navigation menu, tap 3. The following pieces of information are displayed: • The name and/or address of the destination. • Warning icons (if any). They provide extra information about your route (e.g. unpaved roads or toll roads to be taken). • The total time of the route.
VM9725BT MODIFYING THE ROUTE When navigation is already started, there are several ways to modify the active route. The following sections show some of those options.
VM9725BT Setting a New Starting Position for the Route For normal navigation, all routes are planned from the current position. In order to check future routes, simulate them or see their length in time and distance, you can turn off the GPS receiver. Then you can set the starting point of the route to a different location than the current GPS position. If you are on the Map screen, tap Navigation menu. 2. In the Navigation menu, tap to return to the 1. 3.
VM9725BT 4. The first line is the start of the route, normally the current GPS position. Tap and confirm your action at the warning message. 5. The Destination menu appears and you can select the start point of the route the same way you select a destination. 6. When the new start point is set, tap . 7. The map returns with a transparent Vehimarker (showing that there is no GPS reception). If an active route already existed, it is now recalculated starting from the selected location. 8.
VM9725BT Editing the List of Destinations (Edit Route) You can edit the route by modifying the list of destinations. You can add or remove destinations, modify the start position or reorder the list. If you are on the Map screen, tap Navigation menu. 2. In the Navigation menu, tap to return to the 1. 3. If you already have a route, tap . . 4. You have the following options: • Tap to add a new destination. • Tap to delete a destination. • Tap to modify the start point of the route.
VM9725BT Pausing the Active Route You do not need to pause the active route: when you start driving again, iGo primo restarts the voice instructions from your position. Canceling the Active Route To cancel the navigated route, do one of the following: • If you are on the Map screen, tap and then tap (If you have a route with waypoints, you need to tap are deleted.) and then tap • In the Navigation menu, tap active route is deleted with all its waypoints. . until all waypoints .
VM9725BT Checking Route Alternatives when Planning the Route You can select from different route alternatives or change the route planning method after you have selected a new destination. Do as follows: 1. Select a destination as explained earlier, and go to the route confirmation screen. 2. Tap . 3. Tap . 4. You see the basic details of three route alternatives with the selected route planning method. Tap any of them to see it on the map.
VM9725BT 5. Or if you cannot find a good alternative, tap routes with different routing methods. and scroll down for 6. Select one of the route alternatives and tap to return to the previous screen. iGo primo recalculates the route. The orange line now shows the new recommended route. Checking Route Alternatives for an Existing Route To recalculate the active route with a different route planning method, you can modify the Route settings.
VM9725BT 3. Tap . 4. Tap . 5. You see the basic details of three route alternatives with the selected route planning method. Tap any of them to see it on the map. 6. Or if you cannot find a good alternative, tap routes with different routing methods. and scroll down for 7. Select one of the route alternatives then tap and hold for a few seconds to return to the Map screen. iGo primo recalculates the route. The orange line now shows the new recommended route.
VM9725BT Changing the Vehicle Used in Route Planning To recalculate the active route for a different vehicle, do as follows. These changes can also be made in Settings. 1. On the Map screen, tap 2. Tap and then tap . and then tap one of the following: • • • • • • 3. iGo primo recalculates the route optimized for the new vehicle type. The orange line now shows the new recommended route.
VM9725BT Changing the Road Types Used in Route Planning To recalculate the active route with different road type preferences, do as follows. These changes can also be made in Settings. 1. On the Map screen, tap and then tap . 2. Tap any of the listed road types to modify the route. If needed, scroll the list for all road types.
VM9725BT SAVING A LOCATION AS A FAVORITE DESTINATION You can add any location to Favorites, the list of frequently used destinations. 1. Select a destination as described before. It can be an address, a Place, any location on the map, a previously used destination from History, a coordinate or a location where a photo was taken. 2. When the full screen map appears with the selected location in the middle, tap . 3. Tap . 4. (Optional) Using the keyboard, you can change the name offered for the Favorite.
VM9725BT SAVING A LOCATION AS AN ALERT POINT You can save any map location as an alert point (for example a speed camera or a railroad crossing). 1. Browse the map and select a location. The red Cursor appears there. 2. Tap . 3. Scroll down the list and tap . 4. On the newly opened screen, select the type of the alert point, the direction from which you expect the alert, and (if applicable) the speed limit for this alert point. 5. Tap 104 to save the location as a new alert point.
VM9725BT EDITING AN ALERT POINT You can edit a previously saved or uploaded alert point (for example a speed camera or a railroad crossing). 1. Browse the map and select the alert point to edit. The red circle appears around the alert point. 2. Tap . 3. Scroll down the list and tap . 4. On the newly opened screen, modify the type of the alert point, the direction from which you expect the alert, or (if applicable) the speed limit for this alert point. 5. Tap to save the changes to the alert point.
VM9725BT WATCHING THE SIMULATION OF THE ROUTE You can run a simulated navigation that demonstrates the active route. Do as follows: 1. If you are on the Map screen, tap to return to the Navigation menu. 2. In the Navigation menu, tap 3. Tap . . 4. Scroll down the list and tap . The simulation starts from the starting point of the route, and using a realistic speed, it leads you through the whole recommended route.
VM9725BT 5. (Optional) You have the following controls during the simulation (the control buttons disappear after a few seconds but you can open them again if you tap the map): • : Jump to the next route event (maneuver). • : Pause the simulation. • : Jump to the previous route event (maneuver). • : Tap to increase the speed of the simulation to 4, 8 or 16 times faster. Now tap again to return to the normal speed. 6. Tap to stop the simulation.
VM9725BT This page intentionally left blank.
VM9725BT REFERENCE GUIDE On the following pages you will find the description of the different concepts and menu screens of iGo primo. CONCEPTS Smart Zoom Smart Zoom provides much more than just a usual automatic zoom feature: • While following a route: when approaching a turn, it will zoom in and raise the view angle to let you easily recognize your maneuver at the next junction.
VM9725BT Route Calculation and Recalculation iGo primo calculates the route based on your preferences: Route planning methods: • : Gives a quick route if you can travel at or near the speed limit on all roads. Usually the best selection for fast and normal cars. • : Gives a route that has the smallest total distance of all possible routes. It can be practical for slow vehicles. • : Gives a quick but fuel efficient route based on the fuel consumption data given in Green Routing settings (page 88).
VM9725BT • Maneuver restrictions and directional constraints (if they are applied to bicycles in the map data) are taken into account when planning a route. • Roads are used only if access for bicycles or pedestrians is allowed. • Controlled-access roads are excluded from routes. • A private road is used only if the destination is there. • Speed limits are not used in route calculation and an average cycling speed is used when calculating the estimated time of arrival.
VM9725BT Road types used or avoided in route calculation: • • • • • • Whenever data exist, route calculation takes into account statistical traffic data for the given day of week and time of day. Real-time Traffic events are also taken into account and sometimes greatly modify the route. iGo primo automatically recalculates the route if you deviate from the proposed itinerary or if a newly received Traffic event concerns a part of the recommended route.
VM9725BT Green Routing Route calculation is not only about finding the quickest or shortest route. For some of the vehicle types, you can also check the fuel consumption and CO2 emission when planning a route, and you can create cost effective routes with less effect on the environment. to enter the necessary parameters of your vehicle In Settings, select and the average fuel price.
VM9725BT Road Safety Cameras and Other Proximity Alert Points There is a special proximity warning for road safety cameras (like speed or red light cameras) and other proximity alert points (like schools or railroad crossings). These alert points are preloaded in iGo primo. You can download more from www. naviextras.com or you can upload points in a specific text file if needed. You can also add your own alert points or edit the preloaded or uploaded points.
VM9725BT GPS Position Quality Indicators You can find useful information in the top corners of menu screens. In the top right corner, the GPS reception quality icon shows the current accuracy of the position information. Icon Description iGo primo has no connection to the GPS receiver: GPS navigation is not possible. Devices with a built-in GPS receiver are permanently connected. On such devices, the icon does not appear in normal circumstances.
VM9725BT ‘MORE’ MENU The ‘More’ menu provides you with various options and additional applications. Tap the following buttons: Button , . Description You can configure the program settings, and modify the behavior of iGo primo. Fine-tune route planning options, change the look of the Map screen, turn on or off warnings, or restart the Configuration wizard, etc. See the next chapter for details. Visit www.naviextras.com to get additional content, such as new maps or 3D landmarks and useful applications.
VM9725BT If you save your trip logs when you arrive at some of your destinations or let the application automatically save the trip logs for you, those logs are all listed here. Tap one of the trips to see the trip statistics, speed and altitude profile. If track log has also been saved, you can display it on the map with the selected color. Track logs can be exported to GPX files for later use. Select a country from the list and see useful driving information about the selected country.
VM9725BT SETTINGS MENU You can configure the program settings, and modify the behavior of iGo primo. Tap the following buttons: , The Settings menu has several options. Tap full list. Button , . or scroll with your finger to see the Description Adjust the sound volume, mute your device or change the voice guidance language. In addition, you can enable and set up different warnings and alerts. The content of the Quick menu is fully customizable.
VM9725BT You can fine-tune the appearance of the Map screen. Adjust the map view to your needs, choose suitable color themes from the list for both daytime and night use, change the red arrow to a 3D car model, show or suppress 3D buildings, turn track logging on or off, and manage your Place visibility sets (which Places to show on the map). Settings related to guidance on the map screen can be adjusted here.
VM9725BT Sound and Warnings Adjust the sound volume, mute your device or change the voice guidance language. In addition, you can enable and set up different warnings and alerts. Button Description Tap this button to adjust the volume of the different sounds in the application. A new screen shows the different sound types and their controls. See below for details. This button shows the current voice guidance profile.
VM9725BT This feature allows you to receive a warning when approaching a Road Safety Camera. You must ensure on your own liability that using this feature is legal in the country where you intend to use it. This button is not displayed when GPS position is not available or if you are in certain countries where road safety camera warning is prohibited. Even if the button is available, you are responsible for checking whether it is legal to use this feature at your location.
VM9725BT You can control the volume of the following sound types: Button Description This is the main volume control. These controls affect all below sounds. They can also be accessed from the Quick menu. These controls affect the volume of the guidance sounds (verbal instructions). These controls affect the volume of the alert sounds (beeps). These controls affect the volume of the background music. Key sounds provide audible confirmation of tapping the touch screen. These controls affect key sounds.
VM9725BT Customize Quick Menu The content of the Quick menu is fully customizable. Tap the button you want to change, and select its new function from the list. Traffic Settings The recommended route is not always the same between two points. Whenever suitable data exists, offline statistical traffic information (historical speed information or traffic patterns) can be taken into account in the route calculation based on the time of day and the day of week. This function is subject to data availability.
VM9725BT Route Settings These settings determine how routes will be calculated. Button Description You can set the type of vehicle you will use to navigate the route. Based upon this setting, some of the road types can be excluded from the route, or some of the restrictions may not be taken into account in route calculation. The route calculation can be optimized for different situations and vehicle types by changing the planning method. See below for details.
VM9725BT iGo primo excludes unpaved roads by default: unpaved roads can be in a bad condition and usually you cannot reach the speed limit on them. Carpool or HOV lanes can be used if a given number of passengers are traveling in the vehicle. You should check whether you are allowed to use carpool lanes before enabling this road type. Vehicle types: • Maneuver restrictions and directional constraints are taken into account when planning a route. • Roads are used only if access for cars is allowed.
VM9725BT • • All maneuvers are available in intersections. • Directional constraints are taken into account the way that opposite direction is allowed with a low speed. • A private road is used only if the destination is there. • Walkways are excluded from routes. • Maneuver restrictions and directional constraints are taken into account when planning a route. • Roads are used only if access for buses is allowed. • Private roads, resident-only roads and walkways are excluded from routes.
VM9725BT Green Routing Settings These settings determine how Green routes will be calculated. They are also used to display the cost and CO2 emission of routes. Button Description Enter the average consumption of your vehicle when used in built-up areas. If necessary, tap select and to change the measurement unit. Enter the average consumption of your vehicle when used on highways. If necessary, tap select and to change the measurement unit. Select the engine and fuel type of your vehicle.
VM9725BT Map Settings You can fine-tune the appearance of the Map screen. Adjust the map view to your needs, choose suitable color themes from the list for both daytime and night use, change the red arrow to a 3D car model, show or hide 3D buildings, turn track logging on or off, and manage you Place visibility sets (which Places to show on the map). The map is always shown on the screen so that you can see the effect when you change a setting.
VM9725BT Show or suppress 3D city models, 3D artistic or block representation of full city building data containing actual building size and position on the map. Turn on or off track log saving, that is, saving the sequence of the locations your journeys go through. Select which Places to show on the map while navigating. Too many Places make the map crowded so it is a good idea too keep as few of them on the map as possible. For this, you have the possibility to save different Place visibility sets.
VM9725BT Visual Guidance Settings Settings related to guidance on the map screen can be adjusted here. Button Description The data fields in the corner of the Map screen can be customized. Tap this button and select the values you want to see. The values can be different when you navigate a route from when you are just cruising without a given destination.
VM9725BT Display Settings Display related settings include menu animations, separate skins for daytime and night use and the brightness of the display. Button Description When animation is turned on, buttons on menus and keyboard screens appear in an animated way. Screen transitions are also animated. Select the style and colors of the application used in daytime mode. Select the style and colors of the application used in night mode. Adjust the display backlight.
VM9725BT Trip Monitor Settings Trip logs and track logs contain useful information about your trips. Trip logs can be saved manually when you reach your destination or you can turn on the automatic saving here. You can access these logs in the Trip monitor. Trip monitor is available from the More menu. Button Description Trip monitor can record statistical data of your trips. If you need these logs later, you can let the application save them automatically for you. This is not a button.
VM9725BT GLOSSARY 2D/3D GPS reception The GPS receiver uses satellite signals to calculate its (your) position and needs at least four signals to give a three-dimensional position, including elevation. Because the satellites are moving and because objects can block the signals, your GPS device might not receive four signals.
VM9725BT North-up map orientation In North-up mode the map is rotated so its top always faces North. This is the orientation for example in Find on Map. See also: Track-up map orientation. Road Safety Camera Special alert points for speed, red light or bus lane cameras. Different data sources are available. You can configure iGo primo to warn you when you approach one of these cameras. Detecting the location of Road Safety Cameras is prohibited in certain countries.
VM9725BT END USER LICENSE AGREEMENT 1 The contracting parties 1.1 This Agreement has been entered into by and between NNG Kft. (registered seat: 23 Bérc utca, H-1016 Budapest, Hungary; Company reg.no.: 01-09-891838) as Licensor (hereinafter: Licensor) and You as the User (hereinafter: User; the User and the Licensor jointly referred to as: Parties) in subject of the use of the software product specified in this Agreement. 2 Conclusion of the Agreement 2.
VM9725BT 4.5 Your rights under this Agreement will terminate immediately without notice from Licensor if you materially breach it or take any action in derogation of Licensor’s and/or its licensors’ rights to the Software Product. Licensor may terminate this Agreement should any Software Product become, or in Licensor’s reasonable opinion likely to become, the subject of a claim of intellectual property infringement or trade secret misappropriation.
VM9725BT 7.1.3 to translate the Software Product (including translation (compilation) to other programming languages); 7.1.4 to decompile the Software Product; 7.1.5 to evade the protection of the Software Product or to modify, circumvent or obviate such protection through technological or by any other means; 7.1.
VM9725BT 8.5 The Licensor also draws the attention of the User to the fact that, when using the Software Product in any form of vehicle, observing the traffic regulations and rules (e.g. use of obligatory and/or reasonable and suitable security measures, proper and generally expected care and attention in the given situation, and special care and attention required due to the use of the Software Product) is the exclusive responsibility of the User.
VM9725BT 9.4 Contents and services provided by the Licensor or an agent of the Licensor The Licensor or a contractual partner may offer various products and services to the User through www.naviextras.com. The User may only use these services when the User has read and understood the relevant end user license agreement(s) at www.naviextras.com and the User is obliged to use the services in line with the terms and conditions thereof. 9.
Audiovox Electronics Corporation Hauppauge, NY 11788 Technical Assistance: 1-800-323-4815 www.jensen.
• 0 0 ~ 0 0 ~ a ••
Limited Warranty DO NOT RETURN THIS PRODUCT TO THE STORE CD or Multimedia Radios/Headunits Audiovox Electronics Corporation (“the Company”) is committed to quality and customer service, and are pleased to offer you this Warranty. Please read it thoroughly and contact the Company at 1-800323-4815 with any questions. Who is covered? The Company extends this warranty to the original retail purchaser of products purchased through an authorized Audiovox retailer in the U.S.A., Puerto Rico or Canada.
