User Guide

OPERATING INSTRUCTIONS
Power On / Off
Press the / button (1) on the unit (or the button (4) on the remote control) to turn the unit on. Press and hold the button to power off the unit. The
monitor is drawn back into the main compartment (if the Tilt function is in use).
Audible Beep Confirmation
An audible beep tone confirms each function selection. The Beep tone can be disabled through the Setup menu.
Mute
Press the / button (1) on the front panel or the MUTE button (3) on the remote to mute the volume from the unit. MUTE” is displayed on the
screen. Press the / button again to restore the volume. Adjusting the volume or using any of the audio setup features cancels the mute function.
Playing Source Selection
Press the SRC button (2) on the front panel or the SRC button (8) on the remote to change between available playing sources in the following
order: SD, AUX (AV-IN), DISC and BAND (Radio). The playing mode is displayed on the TFT screen.
Source Menu
You can also use the touch screen to change the source through the SOURCE MENU. To access the SOURCE MENU, touch the top left corner of
the screen (or press the MODE button (12) on the remote control). Touch the SD, AUX, DISC or BAND button to select the corresponding source.
External Devices
External peripheral devices, including a game console, camcorder, navigation unit, iPod, Zune, etc. can be connected to the front of this unit using
one of the A/V Media Adapter Cables (included). Select “AUX” mode to access auxiliary devices. You cannot directly control external devices
connected to the AUX IN inputs.
NOTE: External sources will be displayed incorrectly if the MIRROR function is activated. To correct this problem, access the setup menu and set
the MIRROR function to “OFF”.
Volume Adjustment
To increase or decrease the volume level, press the VOL-/+ buttons on the unit (3, 4) or on the remote control (15, 16).
When the volume level reaches “0” or “40”, a beep sounds, indicating that the adjustment limit has been reached. The volume ranges from “0” to
“40”. The TFT screen displays the volume level for 3 seconds.
Audio/Display Menu
The Audio/Display menu feature allows you to easily adjust your audio system to meet the acoustical characteristics of your vehicle, which vary
depending on the type of vehicle and its measurements. Proper setting of the Fader and Balance boosts the effects of the cabin equalizer. Press
the SEL button on the remote control (13) or on screen (or touch the bottom left corner of the screen) to view the audio menu. To adjust an audio
feature:
• Use the arrow keys on the remote control to move left/ right to select an option or up/down to modify settingsfor the selected option.
• Touch the arrows on the TFT screen at the top or bottom of each option to adjust the settings.
NOTE: The EQ mode will automatically change to “USER” when individual audio functions are adjusted. If the USER settings correspond with a
preset curve, that EQ option will be displayed.
13
Subject to technical changes
Audio Function
Adjustable Range
EQ (graphic equalizer)
User
Flat
Clas (classical)
Pop
Rock
BAS (bass)
-7 to +7
TRE (treble)
-7 to +7
FAD (fader)
F7 to R7
BAL (balance)
L7 to R7
BRI (brightness)
-8 to +8
CON (contrast)
-8 to +8
COL (color)
-8 to +8
SUB (subwoofer volume)
33 to 0