User Guide

Stopping Playback
Touch the button on screen or on the remote control (14) to stop disc play.
To resume playback, touch the /|| button on screen or on the remote control (19).
Pausing Playback
Touch the /|| button on screen or on the remote control (19) to suspend or resume disc play.
Moving Through Tracks
Press the >>| button on the remote control (18) or on screen to advance to the next chapter on the disc.
Press the |<< button on the remote control (17) or on screen to move to the previous chapter.
Fast Forward/Reverse
Press and hold the >>| or |<< buttons on the remote control or on screen to fast forward or fast reverse. Press and hold once for X 2. Press and
hold additional times for X 4, X 8, X 20 or PLAY. Press the play/pause >/|| button to end fast forward or reverse and resume normal playback.
Repeat Chapter/Title (REPT)
Press the REPT button (7) on the remote control multiple times during playback to select from the following repeat play options:
• VCD: REP ONE (track), REP ALL (disc), REP OFF
• DVD: REP Chapter, REP Title, REP OFF
Repeat Section (REPT A-B)
To repeat a specified section of a track (chapter), perform the following steps:
• Press the A->B button on the remote control (6) to select the starting point. The display will show “REPEAT A-”.
• Press A->B when you reach the desired ending point.
The display shows “REPEAT A-B” and the selected section will play repeatedly. To cancel section repeat, press the A->B button again. “A-B
CANCEL” appears on the display.
DVD Playback Features
The following remote control features are available during DVD playback:
• AUDIO: Press to choose an alternate audio language, if available.
• SUBTITLE: Press to select an alternate subtitle language, if available.
TITLE: Press to display the title or chapter list. Use the , , or cursor buttons or the numeric buttons to enter a title or chapter number, and then
press OK to play.
• ANGLE: Press to select an alternate viewing angle, if available.
• ZOOM: Press to zoom the picture at ZOOM 2, ZOOM 3, ZOOM 4, ZOOM 1/2, ZOOM 1/3 or ZOOM 1/4, or select OFF to return to normal view.
NOTE: Feature availability is dependent upon DVD embedded information.
Programmed Playback
1. Press the PROG button (34) on the remote control to access the programmed playback screen:
2. Use the  or cursor buttons to access the fields on the “PROG” screen.
3. Use the number buttons on the remote control to enter a track number in each field.
4. Press the >/|| button (19) on the remote control or highlight “PLAY” on screen and then press OK to begin playback in the numbered order indi-
cated.
19
Subject to technical changes