User Guide

Image blurred, distorted, or dark Disc is illegally copied Use original disc

PCB cannot be used during

VCD playback PCB is not available on

the disc

No repeat or searching

while playing VCD PCB is on Turn

PCB off

MP3

Interruption occurred

during playback Disc is dirty or scratched Clean disc or replace

File is damaged/bad recording Recreate disc with good files

Incorrect playback message

displayed Message is longer than LCD can display

Care and Maintenance

1. Use only a clean silicone cloth and neutral detergent to clean the front panel or monitor. A rough cloth and nonneu-

tral detergent (such as alcohol) may result in scratching or discoloration.

2. Do not get water or cleaning fluids on the unit.

3. If the temperature inside the player gets too hot, a protective circuit automatically stops play of the disc. If this occurs,

allow the unit to cool before operating the player again.

4. Never insert anything other than a 5” (12 cm) disc intothe player as the mechanism can be damaged by foreign

objects.

5. Do not attempt to use a 3” (8 cm) CD-Single disc in this unit, either with or without an adaptor, as damage to the play-

er and/or disc may occur. Such damage is not covered by the Warranty on this product.

6. The CD player may not operate properly in extreme hot or cold. If such conditions occur, allow the interior of the vehi-

cle to reach a normal temperature before using player.

7. When the vehicle warms up during cold weather orunder damp conditions, condensation may appear on the LCD

panel. Should this occur, the screen will not operate properly until the moisture has evaporated.

8. We suggest you use a cleaning disc in this unit more frequently than in the unit in your home due to the environmen-

tal conditions of the vehicle.

Subject to technical changes