OPERATION MANUAL 128-8338
Important Notice Installation of overhead products requires careful planning and preparation. Be extremely careful when working on a vehicle with side curtain air bags. Do not route wires near any portion of the side curtain air bag assemblies. This includes any anchor points in A, B, C or D pillars of the vehicle. Routing wires in these areas or running wires by the side curtain air bags can prevent the side curtain air bag from fully deploying which can result in personal injury to vehicle occupants.
FEATURES Congratulations on your purchase of the Audiovox VOD100 DVD Player with Drop-Down Video / Monitor. The VOD100 has been designed to give you and your family many years of video entertainment in the mobile environment. Please read the directions that follow to familiarize yourself with the product to ensure that you obtain the best results from your equipment.
CONTROLS AND INDICATORS DIAGRAM (FRONT VIEW) 1. POWER ( ) Button Used to turn the system on/off. 2. Source Select Use to select one of the four sources: DVD, AUX/AV1. 1 3. PLAY (u) Button This button is used to start playback of a disc. 4. STOP (n) Button This button is used to stop playback. 2 3 4 5 6 5. EJECT () Button This Button is used for ejecting discs from the disc Compartment when the source is DVD and the unit is powered up. 7 6.
REMOTE CONTROL OPERATION CONTROL FUNCTION DESCRIPTION (SIDE VIEW & BACK VIEW) Side View 1 1. DVD Disc insertion Slot For loading and removing discs. Unit must be in a powered on state to load disc when disc is inserted. Insert disc with label side facing up. Battery Installation Back View Before attempting to operate your Remote Control, install the batteries as described below. 1) Turn the Remote Control face down. Using your finger, slide the battery cover off in the direction of the arrow.
MAIN FUNCTION DESCRIPTION 1 2 3 4 5 POWER MONITOR SELECT M1 M2 TV DVD 1 2 * Function control is available on the unit and the remote control. ** Function not available in this model. EJECT 35 SOURCE 3 AUTO MEMORY 6 1. POWER Button* Press this button to turn the unit ON and OFF. 2. MONITOR SELECT M1 Button - Sets the remote control code to allow control of the unit set to M1 mode only. M2 Button - Invalid function for this model 3.
. SKIP / SEARCH Button** This button selects between SKIP and SEARCH mode. In "SKIP mode" the TV tuner will tune and stop on channels that are programmed into memory when the CHANNEL UP / DOWN buttons are used. When the SKIP mode is disable, the TV will stop on all active channels. 8. ERASE / WRITE Button** While tuned to a channel, pressing this button will alternately store or erase the channel from memory. 9. FMM ON / OFF Button* Turns the wireless FM Modulator on or off. 10.
15. MENU Button Allows the user to access the DVD menu(DVD MODE). 16. REPEAT Button Allows the user to repeat a selected title, chapter, or track. 17. AUDIO Button Press to display and select the available AUDIO languages in DVD mode. Each time you press the button, the language changes. Note: The languages for audio vary from disc to disc. 18. SUBTITLE Button Press to display and select the available subtitle language in DVD mode. Each time you press the button, the subtitle language changes.
25. NEXT (:) Button Press to skip to the next chapter or track. 26. A-B Button Allow user to repeat the playback from point A to point B. Press A-B button On-Screen Display DVD player Once Repeat AMark the beginning of the section to repeat (Set point A) Twice Repeat AB Mark the end of the section to repeat (Set point B) 3 times AB Off Cancel the A-B repeat function 27. ZOOM Button Press this button to enlarge the picture when playing a DVD disc.
31. DAY / NIGHT Mode Button** This control toggles the unit between "Day" and "Night" LCD illumination modes. In the "Day" mode, the LCD backlit intensity is at Maximum. In "Night" mode, the LCD backlit is dimmed to a preset level that is more suitable for low light operation. 32. PIX Button (Picture Select)* Each time this button is pressed, the on screen picture adjustment displays the "adjustment bar" for BRIGHTNESS, CONTRAST, COLOR, TINT or RESET.
SETTINGS AND ADJUSTMENTS PICTURE ADJUSTMENTS When watching a program, the picture quality can be adjusted to suit your taste. PIX (P) Button 1) Each time this button is pressed, the on screen picture adjustment displays the "adjustment bar" for BRIGHTNESS, CONTRAST, COLOR, TINT or RESET. 2) Once the desired adjustment bar is displayed, use the VOLUME(+)/ VOLUME(-) button to adjust the setting.
MENU ADJUSTMENT SYSTEM (MAIN) MENU and On Screen Display (OSD) 1) In TV mode, Press the MENU button on the remote, the main page of the system menu will appear on screen. 2) Use the cursor buttons p or q to select the desired item in the main page and press the OK button to select. 3) The sub menu will appear on screen. 4) Use the cursor buttons p or q to select an item in the sub menu and then press the OK button to select. 5) Press the Menu button to exit System Menu.
OSD LANGUAGE This allows the user to select the language for the on-screen display. The user can either select English, Spanish, French or German for the OSD language. SYSTEM MENU SCREEN MODE OSD LANGUAGE SOURCE DEFAULT DVD OSD LANGUAGE ENGLISH SPANISH FRENCH GERMAN SOURCE DEFAULT DVD This allows the user to select from: DVD default on- When ever the unit is turned on it will return to DVD mode. DVD default off- When ever the unit is turned on it will return to the last source selected.
SETTINGS AND ADJUSTMENTS The Setup Menu contains features and options that let you customize your DVD player. For example, you can set a language for the on-screen display or prevent DVD playback for children. Using the Setup Menu 1. Press the SETUP button on the remote. The Setup Menu appears on the screen as shown per diagram. Language Video Language Setup Language OSD Language : English Video Setup Video Subtitle : Off Rating Audio : English Rating Rating Setup Misc Misc Setup Misc 2.
LANGUAGE SETUP Language OSD Language Video Subtitle Language for On-Screen Display Rating Audio OSD MENU: The OSD MENU setup allows you to select the language for the on-screen display. The user can either select English, French, Spanish, German or Italian for the OSD language. Misc SUBTITLE SETUP English French Spanish German Italian Language OSD Language Video Subtitle Rating Audio English French select "SUBTITLE" using pqbutton, then press ubutton to enter the Sudmenu.
TV Type The TV TYPE setup allows you to select the system to fit to the color system of the TV to be connected. NTSC - Select this type for NTSC TV PAL - Select this type for PAL TV Multi - Select this type for multi-system TV RATING SETUP Rating This item allows you to limit the content of movie playback from G to Adult. The lower the value, the more strict the control. G Language Parental : 6.
Misc SETUP Language select "MISC" using pqbutton, then press ubutton to enter the Misc menu. Select the subtitle you desire using pqbutton, then press "OK" to confirm the setting. Press tbutton to return. Video Load Factory Screen Saver : On Rating Misc Load Factory Load Factory allows you to reset all options to factory settings. * This function will not affect the Rating control settings.
Playing MP3 Discs MP3 is a format for storing digital audio. An audio CD-quality song can be compressed into the MP3 format with very little loss of quality, while taking up much less space. CD-R discs that have been encoded in MP3 format can be played on your DVD player. The DVD player plays the songs in the order they were burned on to the disc. When playback is started the elapsed time of the track that is playing will be displayed.
Flat Mode: play the entire disc 1/12 This mode is aways on (default). During the Flat Mode all the data folder with MP3, JPEG & movies will be played in sequence. If the Flat Mode function is off, it will only play the selected folder; other folders are disabled. / TRACK 01 TRACK 02 Flat Mode Repeat : Off Mode Normal : TRACK 03 TRACK 04 TRACK 05 Music Playing TRACK 06 Repeat: play repetitively 1/12 Repeat function has 4 options : Off, Single, Folder, All.
Edit Mode Program View Add to Program 1/12 / TRACK 01 TRACK 02 TRACK 03 Notice: Edit Mode/Program view/Add to program functions are all related and can not be implemented during play mode or any other program function. Edit Mode Program View Add to Program TRACK 04 TRACK 05 Music Playing TRACK 06 Album: ------------ Method: Make sure disc playback is off. Move cursor to Edit Mode function and press OK. After Edit Mode is selected, open the folder and select the songs which will be compiled.
DVD Basics To get the optimum use out of the DVD section, make sure you read this section completely. Regional Coding , Both the DVD player and DVDs are coded by region. These regional codes must match in order for the disc to play. If the codes don t match, the , , disc won t play. This unit s code is region 1. Other regional codes cannot be played in this unit. The unit will display "WRONG REGION". Types of Discs your DVD will play • DVD* disc - DVD discs which contain video.
TURNING THE UNIT ON OR OFF 1. Pushing in the Screen Release button will unlock the LCD screen and it will drop down slightly. Pivot the screen downward until a Comfortable viewing angle is reached. The hinge friction will hold the screen in position while the system is in use. 2. Pressing the power button* on the unit or the remote control will turn the system on and off. When in use the internal backlighting will illuminate the controls. 3.
ACCESSORIES WIRELESS HEADPHONES The VOD100 includes a built-in infrared transmitter for use with the supplied wireless headphones. The headphone volume is adjusted using the controls on each headset. Any number of wireless headphones may be used but they must be used within a line of sight from the transmitter, as infrared transmissions, like visible light travel only in a straight line. See the documentation accompanying your wireless headphones.
TROUBLESHOOTING SOLUTION PROBLEM IR remote inoperative Verify that the batteries in the remote are fresh. Verify that the remote sensor eye is not obstructed. If monitor is set to M1, press M1 button on remote; If monitor is set to M2, press M2 on remote. Disc won't play Insert a disc with the label side facing up. Check the type of disc you put into disc tray. This DVD only plays DVDs, audio CDs and MP3s. Both the unit and the disc are coded by region.
SOLUTION PROBLEM Not allowed at the moment The feature or action cannot be completed at this time because: 1. The disc's software restricts it. 2. The disc's software doesn't support the feature (e.g., angles) 3. The feature is not available at the moment. 4. You've requested a title or chapter number that is out of range. Picture is distorted The disc might be damaged. Try another disc. It is normal for some distortion to appear during forward or reverse scan.
REPLACEMENT PARTS Remote Control SPECIFICATIONS 136-4196 LCD Backlighting Edge Light Tube Resolution 2400 x 480 Pixels 1,152,000 Operation Temperature 32 ~131 F (0 ~ 55 C) Storage Temperature -4 ~ 158 F (-20 ~ 70 C) Backlit life 30,000 Hours Video Display System NTSC / PAL Video Output 1.0Vp-p @ 75 ohms Power Source 12V DC Dimension LxWxH 11.0" x 9.5" x 1.7" 289mm x 243mm x 44mm Specifications subject to change without notice.
12 MONTH LIMITED WARRANTY Applies to Audiovox Mobile Video Products AUDIOVOX ELECTRONICS CORP. (the Company) warrants to the original retail purchaser of this product that should this product or any part thereof, under normal use and conditions, be proven defective in material or workmanship within 12 months from the date of original purchase, such defect(s) will be repaired or replaced with reconditioned product (at the Company's option) without charge for parts and repair labor.
WWW © 2008 Audiovox Electronics Corp.
