VOD108FR 10.
Important Notice Installation of overhead products requires careful planning and preparation. Be extremely careful when working on a vehicle with side curtain air bags. Do not route wires near any portion of the side curtain air bag assemblies. This includes any anchor points in A, B, C or D pillars of the vehicle. Routing wires in these areas or running wires by the side curtain air bags can prevent the side curtain air bag from fully deploying which can result in personal injury to vehicle occupants.
FEATURES Congratulations • 10.2” TFT (Thin Film Transistor) Active Matrix LCD (Liquid Crystal Display) Monitor. Congratulations on your purchase of the AUDIOVOX VOD108FR DVD Player with Drop-Down Video / Monitor. The VOD108FR has been designed to give you and your family many years of video entertainment in the mobile environment. Please read the directions that follow to familiarize yourself with the product to ensure that you obtain the best results from your equipment.
CONTROLS AND INDICATORS DIAGRAM (FRONT VIEW) 5 7 3 4 ON OFF 1 2 1. STOP (n) / CHANNEL UP (CH+) control a.) STOP (n) - Press the STOP button once : Stops playback. Pressing the PLAY button will resume playback from where the movie was stopped. - Press the STOP button twice : Pressing the PLAY button will resume playback from the beginning of the DVD. b.
CONTROL FUNCTION DESCRIPTION 1 (BACK VIEW) 5. POWER ( ) Control Used to turn the system on/off. 6. FLO TV Indicator The mode LED will change from white to purple when the FLO TV is connected. 1. REAR IR SENSOR Transmits audio to wireless headphones, allows the remote control to operate the ADV38FR and to control other Accessories in the system. 7. Dome Lights Provide additional interior illumination. 8.
TURNING THE UNIT ON OR OFF 1. Pushing in the Screen Release button will unlock the LCD screen and it will drop down slightly. Pivot the screen downward until a comfortable viewing angle is reached. The hinge friction will hold the screen in position while the system is in use. 2. Pressing the power button* on the unit or the remote control will turn the system on and off. When in use the internal backlighting will illuminate the controls. 3.
OVERHEAD DOME LIGHTS The Dome Lights integrated into the unit are controlled by a three position slide switch. Sliding the switch to the ON position will turn the lights ON. The OFF position will prevent the lights from turning ON with the vehicle's interior lighting and the auto position will allow the lights to turn ON and OFF with the vehicle's interior lighting. Refer to the Installation Guide for wire connections.
SOURCE FEATURE AV1 The AV1 input may be connected to a external video source, video game system, or other audio / video devices. To access the audio/video inputs, turn the unit on and press the S (source) button on the VOD108FR or the Source button on the remote control until "AV1" is displayed on the screen. Turn the video source component on with its power button or remote control and it is now ready to play the audio and video signals from the source connected .
USING THE WIRELESS GAME CONTROLLER The Game Controller transmits to the VOD108FR with two infrared transmitters located on the front of the Game Controller. The Game Controller must be pointed toward the unit for correct operation. Press the source button on the remote control or the unit until GAME CONTROLLER FUNCTIONAL DESCRIPTION 1. Install two AAA batteries in the Game Controller. Observe the correct polarity. 2. Use the ON/OFF selector switch to turn on the Game Controller.
REMOTE CONTROL OPERATION MAIN FUNCTION OPERATION 1 2 3 4 5 POWER MONITOR SELECT EJECT 36 M1 M2 FLO DVD DVD SOURCE 1 2 3 4 5 6 7 8 35 SOURCE FMM ON/OFF 6 34 FMM SELECT 7 IRT ON/OFF 8 9 10 11 12 13 0 DISPLAY RETURN 15 MUTE PIX SYSTEM MENU 33 32 31 30 29 OK 14 Battery Installation 9 VOLUME MODE SETUP MENU 28 16 Before attempting to operate your Remote Control, install the batteries as described below. 1) Turn the Remote Control face down.
* Function control is available on the unit and the Remote Control. ** Function not available in this model. *** FLO TV function only available when optional FLO TV module is installed. Note: Refer to Appendix A FLO TV for FLO TV operating instructions.. 1. POWER Button* Press this button to turn the unit ON and OFF. 2. MONITOR SELECT Button M1 Button – Sets the remote control code to allow control of the unit set to M1 mode.
8. IRT ON/OFF Button Turns the Infrared Transmitter ON or OFF for IR Wireless Headphones. 9. DISPLAY Button Press to display the current disc information while the disc is playing. Press the cursor (pq) buttons to select the Title or Chapter. For Title/Chapter selection use the numeric buttons to enter the desired Title Chapter selection. 10. RETURN Button Press for the disc root menu. Press the button again to resume to disc playback. 11. SYSTEM MENU Button Allow the user to access the system menu.
15. MENU / SETTINGS Button a.) MENU Button Pressing the MENU button in DVD mode will cause the DVD root menu to be displayed. When using the USB device, pressing the MENU button will cause the root menu to be displayed. Pressing the MENU button while listening to MP3 files has no effect as the operation is prohibited. Note: Pressing the FLO TV button will access the FLO TV mode and disable the DVD and USB functions. To return to Dvd control functions press the DVD button.. b.
22. PAUSE Button (II) Press to pause playback. Pressing the PAUSE button again or pressing the PLAY Button will resume normal playback. 23. PLAY Button* Press to activate the play mode while a disc is loaded in the disc compartment. 24. SCAN FORWARD Button (8) Press to search in a forward direction. Press repeatedly to change the search Speed from 2, 4, 8, 16 times the normal speed. 25. NEXT Button (:) Press to skip to the next chapter or track. 26.
28. MODE** / SETUP Button a.) MODE Button ** When in FLO TV mode pressing the MODE button toggles between FLO TV and an auxiliary A/V source attached to the FLO TV module. (NOTE: your system may not have an auxiliary source). b.) SETUP Button When in DVD mode pressing the SETUP button will display the Setup Menu which allows the user to change the DVD player options such as OSD Language, Video, Rating etc. Refer to the settings and adjustment section for more information. 29.
34. NUMBER Buttons When DVD mode these buttons allow the user to enter numbers 0 to 9 for selection of selection of CD tracks, DVD chapters and password. When FLO TV mode these buttons allow the user to select favorite channels and for PIN entry for parental controls. *** 35. DVD Source Button This button is only active when remote control is in DVD mode. Each time the button is pressed one of the sources (DVD or USB) will be selected. If the USB is not plugged in, the unit it will remain on DVD Source.
MENU ADJUSTMENT The System Menu Contains features and options that let you customize your system to change the screen mode display, OSD language and source default. 1) 2) 3) 4) 5) Press the SYSTEM MENU button on the remote, the main page of the system menu will appear on screen. Use the cursor buttons p or q to select the desired item in the main page and press the ENTER button to select. The sub menu will appear on screen.
FMM SELECT FMM ON/OFF options - Turns the FM Modulator on or off. FMM SELECT option - Selects the wireless FM Modulator Frequency (CH1 88.1MHz, CH2 88.3MHz, CH3 88.5MHz, CH4 88.7MHz, CH5 88.9MHz, CH6 89.1MHz, CH7 89.3MHz, CH8 89.5MHz, CH9 89.7MHz, CH10 89.9MHz, CH11 90.1MHz, CH12 90.3MHz, CH13 90.5MHz, CH14 90.7MHz, Ch15 90.9MHz, CH16 91.
SOURCE DEFAULT DVD This allows the user to set the system default source to DVD (via System Menu). Note: • If selected default source is set to DVD every time the unit’s power is cycled with the source set to something other then DVD, the unit will power up and automatically switch the source over to DVD. • Unit will be set to Last Memory on as the default mode of operation. • Selection of Source default can only be made from within the system menu.
SETTINGS AND ADJUSTMENTS The Setup Menu contains features and options that let you customize your DVD player. For example, you can set a language for the onscreen display or prevent DVD playback for children. Using the Setup Menu 1. 2. 3. 4. Press the SETUP button on the remote. The Setup Menu appears on the screen as shown per diagram. Language OSD Language To set the desired option, move the highlight into the setup area using the cursor button u.
SUBTITLE SETUP Select "SUBTITLE" using pqbutton, then press u button to enter the Sub menu. Select the subtitle you desire using pqbutton, then press “ENTER” to confirm the setting. Press t button to return. Note: The subtitle selection is only available for discs that are recorded in the above listed languages. If the selected, language is not available, the player will play and display on the screen the original language contained in the disc.
RATING SETUP Rating Language Video This item allows you to limit the content of movie playback from G to Adult. The lower the value, the more strict the control. 1. G 2. PG 3. PG – 13 4. R 5. NC – 17 6. Adult Parental : 6.Adult Change Password Rating Misc Language Video Parental : 6.Adult Change Password Enter Password Rating Misc The rating level can only be changed when the correct password is entered.
Load Factory This option allows you to reset all options to factory settings. Note: This function will not affect the Rating control settings. Language Load Factory Load Factory Video Screen Saver Yes No Rating Screen Saver This option allows the operator to set the Screen saver mode. ON -Screen saver will appear OFF -Screen saver will not appear Note: The DVD player will enter Screen Saver mode if the unit is inactive for approximately 2 minutes.
Playing MP3 Discs MP3 is a format for storing digital audio. An audio CD-quality song can be compressed into the MP3 format with very little loss of quality, while taking up much less space. CD-R discs that have been encoded in MP3 format can be played on DVD player. The DVD player plays the songs in the order they were burned on to the disc. When playback is started the elapsed time of the track that is playing will be displayed.
Repeat: play repetitively Repeat function has 4 options : Off, Single, Folder, All. Move cursor to Repeat function and press ENTER, Each time ENTER is pressed the unit will cycle through the available options. Off/Single/Folder/All are displayed in that order. Repeat default is Off; 00:00:01 1/12 / 001 Flat Mode 002 Repeat : Off Mode 003 : Normal 004 Off Single Folder All 005 Turn off repeat function Repeat the song being played until STOP is pressed.
00:00:01 Clear program 1/12 Method: To clear the selected song files, press the STOP button twice during playback mode. Move the cursor to the “Edit Mode” function and press ENTER. After “Edit Mode” is selected, move cursor to selected songs list and select the songs you want to delete. Press ENTER and a check mark will appear to the left of the selected song. Move the cursor to clear program and press ENTER, the selected songs will be deleted from the play list.
Region 1- USA, Canada Region 2- Japan, Europe, South Africa, Middle East, Greenland Region 3- S. Korea, Taiwan, Hong Kong, Parts of South East Asia Region 4- Australia, New Zealand, Latin America (including Mexico) Region 5- Eastern Europe, Russia, India, Africa Region 6- China DVD Region Code The DVD player is preset to a region code at the factory depending on where the DVD player is sold.
Types of Discs your DVD will play • DVD* disc - DVD discs which contain video. • Audio discs - Audio CDs contain musical or sound content only. • MP3 discs - A disc that contains audio files (for example, a CD-R with downloaded MP3 files). * This system is capable of playing most recordable DVD formats. However, due to the variety of disc manufacturers and software, playback cannot be guaranteed. Loading and Playing Discs Before you load a disc, make sure that it is compatible with the player.
TROUBLESHOOTING SOLUTION PROBLEM IR remote inoperative Verify that the batteries in the remote are fresh. Verify that the remote sensor eye is not obstructed. Disc won't play Insert a disc with the label side facing up. Check the type of disc you put into disc tray. This DVD only plays DVDs, audio CDs and MP3s. Both the unit and the disc are coded by region. If the regional codes don’t match, the disc can’t be played. Play starts, but then stops immediately The disc is dirty. Clean it.
TROUBLESHOOTING (cont’d) SOLUTION PROBLEM Not allowed at the moment The feature or action cannot be completed at this time because: 1. The disc’s software restricts it. 2. The disc’s software doesn’t support the feature (e.g., angles) 3. The feature is not available at the moment. 4. You have requested a title or chapter number that is out of range. Picture is distorted The disc might be damaged. Try another disc. It is normal for some distortion to appear during forward or reverse scan.
REPLACEMENT PARTS SPECIFICATIONS Remote Control 136-5055 LCD Backlighting Edge Light Tube Wireless Headphones IR1CFF Resolution 1280 (RGB) x 800 Pixels 3,072,000 Operation Temperature 32 ~131 F (0 ~ 55º C) Storage Temperature -4 ~ 158 F (-20 ~ 70º C) Backlit life 30,000 Hours Video Display System NTSC / PAL Headphone Audio Output 0.03W @ 32 ohms Video Output 1.0Vp-p @ 75 ohms Power Source 12V DC Dimension LxWxH 14.0" x 12.0" x 2.
APPENDIX A FLO TV Copyrights and Trademarks © 2009 Audiovox Corporation. All rights reserved. FLO, FLO TV and the FLO TV logo are trademarks of QUALCOMM Incorporated. QUALCOMM is a registered trademark of QUALCOMM Incorporated in the United States and may be registered in other countries. AUDIOVOX is a registered trademark of Audiovox Corporation. ADVENT is a registered trademark of Audiovox Corporation. MACROVISION is a registered trademark of ROVI Corporation.
FLO TV OPTION (P/N AVXFRK1) Your VOD108FR is designed for adding an optional FLO TV Tuner. If you do not have the FLO TV Tuner installed, this section can be ignored. To have the FLO TV Tuner added to your system contact the business that installed your VOD108FR. Activation/Subscription Information Your FLO TV module will need to be activated before you can begin enjoying the FLO TV service. Activation takes place after you subscribe to the FLO TV service.
FLO TV Introduction Please refer to the following as an overview to use the FLO TV service: 1. Turn the vehicle ignition key to the ON position. Turn on your ADV38FR and select the FLO TV source by pressing the Source button on the overhead or by pressing the FLOTV Button on the remote. (Note: Watching the FLO TV service for an extended period of time with the engine OFF will run down the vehicle's battery.) 2.
FLO TV Operation You can operate the FLO TV module with the wireless remote control. When FLO TV is powered on, the FLO TV logo screen will be displayed until the receiver tunes to a channel. This may take up to 30 seconds after the vehicle and overhead turned on. Upon power up, the FLO TV service will default back to the last viewed channel. If the screen does not appear press the Mode key on the remote control to switch back to FLO TV.
Are You Covered? FLO TV service coverage is available in many metropolitan areas and travel corridors within the United States. Please visit the FLO TV web site (www.flotv.com) to check the coverage maps in your area. If you are travelling in an area that is not covered by the FLO TV network or travel out of the areas covered by the FLO TV network the adjacent screen will be displayed: Once you have returned to an area covered by the FLO TV network, FLO TV programming will resume.
Remote Control Functions Symbol Function Use for channel changing (up/down), navigating menus, and selecting items pqtu OK (ENTER) Use to select a channel or setting Information key - use to display program information. Channel Guide - use to select the channel guide Back key - takes the user back one screen when in the Menu, Show Information, Show Description, or Guide.
How is FLO TV Programming Rated? Parental controls are built into FLO TV so that you can filter the program and movie content that can be watched on the FLO TV service. Adjacent is a ratings chart based on content type for TV program material and movie material: Movie ratings information, if provided, is available in the FLO TV programming guide.
Getting Around in FLO TV Watching the FLO TV service limits the channel information or pop-ups occurring while viewing the program as shown on the adjacent screen: If you want to see what channel you are on, press the adjacent screen and information will appear: o o o o o (Info) key and the Channel Logo Program Title Program Start Time Program End Time Program rating 36
Pressing the (Info) key again will display more information about the channel being viewed as shown in the adjacent screen: Information displayed: o o o o o o o Channel Logo Program Title Program Start Time Program End Time Program Rating Episode Title Episode Summary Pressing the (Info) key will return the viewer to the full screen.
FLO TV Program Guide You can access the FLO TV program guide by pressing the which displays the program guide: (Guide) key The FLO TV program guide is a matrix of programs and their start times, organized by channel. A user can view the guide and tune to a currently playing program or view program descriptions for future programs.
Notes ! Programs that are blocked due to Parental Controls display the locked icon. ! The channel logo column is not selectable. ! The guide loops vertically when you press the ▲ (up arrow) or ▼ (down arrow) key. ! The guide is bounded horizontally by time. The user cannot navigate into the past or beyond the amount of guide data available. ! Current program tuned is designated by darker cell color and vertical right color bar when not in focus.
Settings Menu Press the (Settings) key to enter the Settings Menu and the adjacent screen will be displayed: Parental Controls In the Settings Menu, the first selection is Parental Controls, which is highlighted in light gray. Press the ENTER key to access the parental controls menu.
Use the u (right arrow) key to highlight the parental on/off control and press OK to enable it or disable it. Once enabled, press the OK key and you will be prompted to create a PIN (Personal Identification Number) as shown in the adjacent screen: Use the remote control keypad to enter a 4 digit PIN. When the fourth digit is entered the adjacent screen will appear to confirm the new PIN.
Re-enter the same 4 digit PIN to confirm the PIN number. The adjacent screen will be displayed: (NOTE: Write the PIN down in a secure location. If it is lost you will have to call 1-888-99FLOTV to reset the PIN. The PIN cannot be reset online. Do not share your PIN with the person whose access to programming is being restricted.) Once you have set your PIN, you can now change the ratings limit on TV, Movies and Audio content.
Favorite Channels Up to 10 channels can be programmed into the numeric keys on the remote. Once they are programmed, pressing any one of them tunes your FLO TV to the channel that you have pre-programmed to the number key. If you have not pre-programmed favorites, when you press a numeric key, you will be prompted by the info bar at the bottom of the screen asking you if you want to add the channel to your favorites: To program favorite channels press the (Settings) key to access the settings menu.
Subscription Information In the Settings Menu, use the ▲ (up arrow) or ▼ (down arrow) key to highlight Subscription Information and press the ENTER key, the adjacent screen will be displayed: This screen tells you the basic information of your FLO TV system. (Note: The Authorization Code and Device ID will be different from the above screen, which is for reference only.
Legal Information Use the ▼ (down arrow) key to highlight Legal Information. This information governs the terms and conditions of your use of the FLO TV service and the FLO TV network. To see the full text and the privacy policy go to www.flotv.com.
Troubleshooting Explanation FLO TV Screen Observed You are not subscribed and are not able to access any channel except the FLO TV channel. Unable to access any channel; you are out of the coverage area. You are either out of the coverage area or your FLO TV module has not updated the program guide information. The FLO TV Service will return to normal when you are back in the coverage area.
Troubleshooting (cont’d) FLO TV Screen Observed Explanation You are in a fringe coverage area; programming will return to normal when you are back in the coverage area.. You are out of the coverage area; programming will return to normal when you are back in the coverage area. Contact the car dealer or the retailer where this product was installed or purchased.
Troubleshooting (cont'd) Problem Poor or No Video Root Cause FLO TV Input not selected Solution Change the source inputs on the overhead until the FLO TV signal is displayed. Wireless Remote Control does not work Batteries installed incorrectly Verify that the two AAA batteries are installed properly per the polarity markings. Batteries are dead Replace the two AAA batteries.
AUDIOVOX LIMITED WARRANTY Applies to Audiovox Mobile Video Products AUDIOVOX ELECTRONICS CORP. (the Company) warrants to the original retail purchaser of this product that, should this product or any part thereof (except game controllers), under normal use and conditions, be proven defective in material or workmanship within 36 months from the date of original purchase, such defect(s) will be repaired or replaced with reconditioned product (at the Company's option) without charge for parts and repair labor.
NOTES
NOTES
© 2010 AUDIOVOX Electronics Corp.