PO WE R EJE CT C H A NN EL R EW VOD806 VO LU ME A U TO 8” LCD OVERHEAD TV/MONITOR WITH DVD PLAYER IR VIDEO L R OFF VOD705 STO P H EA D PHON ES A UD IO F.F A U TO SO U RC E PIC TU RE PR O GR A M SEL EC T SEL EC T ON IN PU T PL AY ® ELECTRONICS CORP. Released 03-08-02.
Important Notice It is unlawful in most jurisdictions for a person to drive a motor vehicle which is equipped with a television viewer or screen that is located in the motor vehicle at any point forward of the back of the driver’s seat, or that is visible, directly or indirectly, to the driver while operating the vehicle. In the interest of safety, the VOD806 should never be installed where it will be visible, directly or indirectly, by the operator of the motor vehicle.
Features Congratulations on your purchase of the Audiovox VOD806 Overhead TV/Monitor with DVD Player. The VOD806 has been designed to give you and your family many years of video entertainment in the mobile environment. Please read the directions that follow to familiarize yourself with the product and to ensure that you obtain the best results from your equipment.
Controls and Indicators Diagram ! # % POW ER " $ EJECT C H AN N EL REW P L AY A U TO SO UR C E PROG RAM SELECT F.
Main Function Descriptions 8. VOLUME UP (+) Button Use this button to raise the volume level of the headphone jacks. It is also used to make picture adjustments in picture select mode. NOTE: These buttons will not affect the volume of wireless headphones or the wired RF modulator. When using these devices the volume must be adjusted with the wireless headphone volume control or with your radio’s volume control (see page 10, Wireless Headphones, or page 11, Wired FM Modulator). 9.
13. Power Button (Bright red when system is on, dim when off). 14. Source Select (DVD, TV, AV1, AUX). 15. TV Auto-program Allows the user to scan and program active TV stations into memory. 16. Channel Up (F) Button Use this button to increase the channel number to the desired channel. 17. Channel Up (G) Button Use this button to decrease the channel number to the desired channel. 18. Dome Lights provide additional interior illumination. 19. Drop Down LCD Panel. 20. Auxiliary Audio Input (Right). 21.
REMOTE CONTROL OPERATION POWER FM TRANSMITTER SELECT EJECT ON/OFF BATTERY INSTALLATION & ' SOURCE % AUTO MEMORY ! Before attempting to operate your Remote Control, install the batteries as described below. 1) Turn the Remote Control face down. Using a fingernail, lift the battery cover off. 2) Install two “AAA” batteries as shown. Make sure that proper polarity (+ or -) is observed. 3) Align the cover tabs with the remote control and press down until the cover clicks.
DVD Remote Function Descriptions 4. SKIP / SEARCH This button selects between SKIP and SEARCH modes. In “SKIP mode” the TV tuner will tune and stop on channels that are programmed into memory when the CHANNEL UP/DOWN buttons are used. When the SKIP mode is disabled, the TV will stop on all active channels. 5. ERASE / WRITE While tuned to a channel, pressing this button will store or erase the channel from memory.
18. FM Transmitter Frequency Select Button (Selects 88.3MHz, 88.7MHz, 89.1MHz). 19. FM Transmitter On/Off Button. Used to turn the FM Modulator on and off. 20. NUMBERS Buttons Allows the user to enter the numbers 0 to 9 for selection of CD tracks, password and chapters. 21. VOLUME DOWN (-) Button Use this button to decrease the volume level of the headphone jacks. It is also used to make picture adjustments in picture select mode. 22.
(Chapter, Title, Disc, Off). 28. A-B REPEAT Button Allows the user to repeat play of a DVD, CD or MP3 from point A to point B. 29. VCP Mode Select Button Switches certain function keys on the remote control for VCP functions. 30. DVD Mode Select Button Switches certain function keys on the remote control for DVD functions. 31. STOP (n) Button DVD disc play will be stopped. 32. PLAY Button ( K)Button* Press this button to activate the play mode while a disc is loaded into the disc compartment. 33.
Turning the VOD806 On or Off CHANNEL TUNING SET UP In order to easily access all available TV channels, it may be necessary to perform channel auto-programming whenever the vehicle’s geographic location has changed, i.e. city to city, weak signal area. Use the Source Select Button on the Remote Control to select TV mode. 1. Press the AUTO MEMORY button on the Remote Control Unit or the AUTO PROGRAM button on the drop down video unit. You will see the TV cycle through all its channels.
4. To ERASE a channel, press the ERASE/WRITE button on the Remote Control Unit until “MANUAL MEMORY XX ERASE” is displayed on screen. To STORE a channel, press the button until the MANUAL MEMORY XX ADD is displayed on screen. Overhead Dome Lights Operation The Dome lights integrated into the VOD806 are controlled by a three position slide switch. Sliding the switch to the on position will turn the lights on.
Remote Sensor Accessories The VOD806 incorporates Infrared sensors which relay signals from the remote control to allow the unit to be controlled simply by pointing its remote control at the remote sensor eye. The repeater function allows control of auxiliary equipment such as an Audiovox Video Cassette Player. The infrared sensor can relay signals from most manufacturer’s remote controls to its respective component connected to the Video input.
Wired Headphones There are two 1/8” headphone jacks on the VOD806 that can be used with any standard wired stereo headphones. These jacks are controlled by the volume up / down buttons on the VOD806 remote control. Remove the protective plastic cover to access the jacks. Remember to replace the cover when the jacks are not in use. AV1 The AV1 input may be connected to a Video Cassette Player (VCP), video game system, or other audio / video device.
DVD Basics Loading and Playing Discs To get the optimum use out of the DVD section, make sure you read this section completely. Before you load a disc, make sure that it is compatible with the player and that there is not a disc in the player already NOTE: that the following Discs CANNOT be used with this player : MiniDisc CD-I, CD-ROM, CD-RW, DVD-ROM Regional Coding Both the DVD player and disc are coded by region. These regional codes must match in order for the disc to play.
2) Select the main item you want using the cursor (FG) buttons, and then press the ENTER button. Settings and Adjustments This chapter describes how to set and how to adjust using the on-screen SETUP menu. To Cancel Using the Setup Display Press the SETUP button on the remote. Using the Setup Display Using the setup display, you can do the initial setup, adjust the picture and sound quality, and set the various outputs.
OSD (On-Screen Display) Language Menu The OSD Language Menu allows the user to select the language for the on-screen display. Press ENTER ▼▲ and then use the (▼▲ ▼▲) buttons to select the desired language. The user can select either English, Frençais, Italiano, Español or Deutsch for the OSD language. Then press ENTER to confirm the selection. Disc Menu Audio Language Menu The Audio language menu allows the user to choose the preferred audio language.
System Settings Aspect This menu allows the user to select the aspect ratio of ▼▲ the monitor. Press ENTER and then use the (▼▲ ▼▲) buttons to select the appropriate setting. 4:3 LB (LETTER BOX) : This displays a wide picture with black bands on the upper and lower portions of the screen. 4:3 PS (PAN SCAN) : This displays the wide picture on the screen with a portion of the left and right sides removed.
Playing DVD, CD and MP3 Disc Using the On-screen Icons display Limiting Playback by Children (Parental Control) The Parental Control function allows you to limit viewing to your preference. ▼▲ 1. Use the (▼▲ ▼▲) buttons to select RATING, then press ENTER. 2. Enter a password in 4 digits using the number buttons, then press the ENTER button. ▼▲ 3. Select LEVEL using the (▼▲ ▼▲) buttons. The on-screen icons display contains many playback features.
Playing DVD Disc T 20 25 00:00:00 --/-Q EN 2CH O F F Q Qsurround function. Use the (J K) buttons to move the cursor to the icon, use the (F G ) buttons to select QSURROUND function on or off. Subtitle Display current subtitle language. Use the (J K) buttons to move the cursor to the icon, use the (JI) buttons to select the required subtitle language or switch on/off the subtitle. --/-EN O N -/- A OFF Title T Chapter Time B A -B 12345 Displays current title.
Repeat Repeat A-B Repeat play function. Use the (J K) buttons to move the cursor to the icon, use the (JI) buttons or REPEAT button to select required repeat play function. Repeat Chapter Repeat Title Repeat Disc Repeat Off Playing CD Disc Repeat play from A to B selected. Use the (J K) button to move the cursor to the icon, use the A-B button or ENTER button to select the A and B points. Track Tr B Set Start Point A Set End Point B OFF Tr Cancel Repeat Use the (JI) or A-B button to cancel.
Play mode Play mode selection. Use the (J K) buttons to move the cursor to the icon, use the (JI) buttons to select any of the three play modes: Sequential (Off), Programmed and Random play modes. Playing MP3 Disc Repeat Repeat play function. Use the (J K) buttons to move the cursor to the icon, use the (JI) buttons or REPEAT button to select required repeat play function. Repeat Chapter Repeat D isc Repeat Off Repeat A-B Repeat play from A to B selected.
Selecting a song Playback begins automatically when you insert an MP3 disc into the player. The VOD806 begins playing the songs in the order they were burned onto the disc. To select a specific song: 1. While the disc is playing, use the number buttons on the remote to enter the song number, or press the up/down arrow buttons ( ▼▲ ) to go to the next or previous song. 2. Press ENTER on the remote.
Directory Display Repeat Feature This feature displays the directory that you have selected. The default mode for the Repeat feature is Off. There are 4 Repeat option: WinAmp 2.64 1. Repeat Off - All the songs will be playing once 2. Repeat One - Repeat the song that is playing 3. all Repeat Disk - Repeat the disc that is playing 4. dir Repeat Dir Repeat the directory that is playing File Display This feature displays the selected track number which contains in the selected directory. .
Troubleshooting To Use Repeat Feature: PROBLEM 1. While a disc is playing, press Repeat button or right arrow button (K) on the remote to bring up the Repeat icon. 2. Press the up/down arrow buttons (▼▲) to highlight the Repeat option (Repeat Off, Repeat One, Repeat Disk, Repeat Dir). 3. Press ENTER on the remote. The selected repeat option will shown on the right side of Time Display.
PROBLEM No sound or distorted sound Can’t advance through a movie The icon ( ) appears on screen SOLUTION • Make sure your DVD is connected properly. Make sure all cables are securely inserted into the appropriate jacks. • If you are using the IR headphones, make sure you turn on the IR power. • Make sure Modulator is ON and the proper Frequency has been selected. SOLUTION PROBLEM Picture is distorted • The disc might be damaged. Try another disc.
Replacement Parts Remote Control Specifications 136B2154 Left Protective Cover for IR Sensor 102B3689 Right Protective Cover for HeadphonesJacks 102B3690 LCD Backlighting Edge Light Tube Resolution 1440 x 234 Pixels 336,960 Operation Temperature 32 -140º F (0 - 60º C) Storage Temperature -4 - 176º F (20 - 80º C) Backlight life 10,000 Hours Video Display System NTSC/PAL Headphone Audio Output 0.03W @ 16 ohms Low Level Audio Output620 mvp-p 1 kHz @ -15 dB Video Output 1.
36 MONTH LIMITED WARRANTY Applies to Audiovox Mobile Video Products AUDIOVOX ELECTRONICS CORP. (the Company) warrants to the original retail purchaser of this product that should this product or any part thereof, under normal use and conditions, be proven defective in material or workmanship within 36 months from the date of original purchase, such defect(s) will be repaired or replaced with reconditioned product (at the Company's option) without charge for parts and repair labor.
