Installation guide

4. Locate the #4 x 5/16” self-tapping screw in the hardware kit.
5. Using a screwdriver, install the #4 x 5/16” self-tapping screw into the location marked “B” shown in the gure below.
6. Locate the three (3) #4 x 7/16” self-tapping screws in the hardware kit.
7. Using a screwdriver, install the three (3) #4 x 7/16” self-tapping screws into the locations marked “C” shown in the gure below.
8. Locate the ve (5) M3 x 8mm screws in the hardware kit.
9. Using a screwdriver, install the ve (5) M3 x 8mm screws into the locations marked “D” shown in the gure above.
NOTE: Use caution tightening screws as the threads may strip in the DVD Player.
8
INSTALLING THE TRIM RING
Trim Ring DVD
PLAYER
TRIM
RING
ON DVD
PLAYER
(B)
(C)
(C)
(C)
(D)
(D)
(D)
(D) (D)
TRIM RING SCREW SET
(B) #4 X 5/16” SELF TAPPING SCREW
(QTY 1)
(C) #4 X 7/16” SELF TAPPING SCREW
(QTY 3)
(D) M3 X 8mm SCREW
(QTY 5)
(B) (C) (D)
This device complies with FCC Rules Part 15.
Operation is subject to the following two
conditions : (1) This device may not cause
harmful interference and (2) This device must
accept any interference that may be received,
including interference that may cause
undesired operation.
This product is Class 1 Laser Product and
complies with FDA Rules 21 CFR Chapter 1,
Subchapter J.
Made in China
FCC ID : ATI9R3ODM21012
Licensed under one or more of the following patents,
Patent NOS. 5,775,762 , 5,927,784 and 6,678,892
150 Marcus Blvd., Hauppauge, NY 11788
Technical Assistance: 1-800-225-6074
ELECTRONICS CORP .
®
132-7828
Inspected By :
Power + Dome Light 6-Pin Harness
LAMP-AUTO
VIO/BRN
BLK/RED
LAMP-COMMON
RED/BLK
LAMP-ON
Signal Name
Color
RED
BLACK
POWER +12v (SW)
POWER GROUND
Connector
CON6
(BLACK)
AV Input 5-Pin Harness
VIDEO-IN
YELLOW
RED
AUDIO R-IN
WHITE
AUDIO L-IN
Signal Name
Color
Connector
CON5
(BLUE)
AV Output 5-Pin Harness
VIDEO-OUT
YELLOW
RED
AUDIO R-OUT
WHITE
AUDIO L-OUT
Signal Name
Color
Connector
CON2
(WHITE)
MODEL NO. : VODDLX10
This device complies with FCC Rules Part 15.
Operation is subject to the following two
conditions : (1) This device may not cause
harmful interference and (2) This device must
accept any interference that may be received,
including interference that may cause
undesired operation.
This product is Class 1 Laser Product and
complies with FDA Rules 21 CFR Chapter 1,
Subchapter J.
Made in China
FCC ID : ATI9R3ODM21012
Licensed under one or more of the following patents,
Patent NOS. 5,775,762 , 5,927,784 and 6,678,892
150 Marcus Blvd., Hauppauge, NY 11788
Technical Assistance: 1-800-225-6074
ELECTRONICS CORP .
®
132-7828
Inspected By :
Power + Dome Light 6-Pin Harness
LAMP-AUTO
VIO/BRN
BLK/RED
LAMP-COMMON
RED/BLK
LAMP-ON
Signal Name
Color
RED
BLACK
POWER +12v (SW)
POWER GROUND
Connector
CON6
(BLACK)
AV Input 5-Pin Harness
VIDEO-IN
YELLOW
RED
AUDIO R-IN
WHITE
AUDIO L-IN
Signal Name
Color
Connector
CON5
(BLUE)
AV Output 5-Pin Harness
VIDEO-OUT
YELLOW
RED
AUDIO R-OUT
WHITE
AUDIO L-OUT
Signal Name
Color
Connector
CON2
(WHITE)
MODEL NO. : VODDLX10