Car Video System User Manual

MATERIALS INCLUDED IN THIS PACKAGE:
1) VOH1012 TV/Video Monitor (1pc)
2) 12 Pin Power / Signal harness (P/N 112-3483) (1 pc)
3) 2 Pin Power Wire Harness with choke (P/ N 112B3143) (1 pc)
4) Hardware Package
#4 x 3/8” Screws (11 pcs)
#8 x 5/8” Self Drilling Screws (4 pcs)
#8 Washers (4 pcs)
5) Remote Control (136-3855) (1pc)
6) PODTVT TV Tuner (P/N 136-3877) (1pc) (Optional)
7) SIRSWB Relay Box (P/N 112C3159) (1pc) (Optional)-See important note on previous page
8) Trim Ring (1pc)
9) FM Antenna Wire (1pc)
10) A/V Adapter Cable (P/N 112B3227) (1pc)
11) Accessory Harness (P/N 8010730 (1pc)
-1-
TOOLS REQUIRED:
#2 Phillips Screwdriver
#1 Phillips Screwdriver
Utility or Razor Knife or Shears
Wire Strippers
Upholstery hook tool (for removal of panels as necessary)
Electrical Tape
Masking Tape
Multimeter (to verify 12 volt DC and continuity: Do not use a test light or logic probe)
Marker pen – to mark headliner
Scribe (to mark trim ring if used)
Misc. electrical connectors (to connect to vehicle power source). Requirements will vary from vehicle to
vehicle)
DVD Movie (to verify system operation after installation)