VX4010 7" Single DIN Multimedia Receiver DVD / Built-in Bluetooth / Compatible with iPhone / Compatible with iPod / Pandora Link / USB / Aux In Operating Instructions 4VRMS RCA Output
VX4010 “Made for iPod” and “Made for iPhone” means that an electronic accessory has been designed to connect specifically to iPod or iPhone, respectively, and has been certified by the developers to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety or regulatory standards. Please note that the use of this accessory with iPod or iPhone may affect wireless performance. Android is a trademark of Google Inc.
VX4010 CONTENTS FEATURES ��������������������������������������������������������������������������������������������������������������� 5 CONTROLS AND INDICATORS ������������������������������������������������������������������������������� 8 REMOTE CONTROL �����������������������������������������������������������������������������������������������10 USING THE TFT MONITOR ������������������������������������������������������������������������������������16 EXTERNAL DEVICES ���������������������������
VX4010 FCC Statement 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
VX4010 Thank you for choosing a Jensen product. We hope you will find the instructions in this owner’s manual clear and easy to follow. If you take a few minutes to look through it, you’ll learn how to use all the features of your new Jensen VX4010 Multimedia Receiver for maximum enjoyment. Please save this manual for future reference. We recommend having your Jensen VX4010 Multimedia Receiver installed by a reputable installation shop.
VX4010 Chassis • • • • • 1.0 DIN (Import / ISO-DIN Mountable) Motorized Flip-Out / Flip-Up TFT Screen 7” High Definition TFT LCD 1,152,000 Sub Pixels (800 x 3 X 480) Beep Tone Confirmation (ON-OFF Option) General • Built-In Bluetooth® providing Hands-Free operation for safety and convenience and A2DP for streaming music from your smartphone or other Bluetooth® device.
VX4010 WARNING! Never install this unit where operation and viewing could interfere with safe driving conditions. WARNING! To reduce the risk of a traffic accident (except when using for rear view video camera) never use the video display function while driving the vehicle. This is a violation of federal law. WARNING! Never disassemble or adjust the unit. WARNING! To prevent injury from shock or fire, never expose this unit to moisture or water. WARNING! Never use irregular discs.
VX4010 CONTROLS AND INDICATORS OPEN VX4010 Controls and Indicators 1. L CD Screen and Touch Screen: Touch icons on this screen to access menus or control functions. 2. E ject ( ) Button: Press this button to eject a DVD/CD/MP3 disc. Disc play is stopped, the disc is ejected and the unit will change to radio operation. If the disc is not removed from the unit and the button is pressed again, the disc will be re-loaded.
VX4010 3. D isplay (DISP) Button: Touch to adjust the screen brightness. Touch and hold to turn the screen off. When the TFT is closed, press once and repeat to cycle through clock time, metadata, RDS information, etc. The type of information displayed depends upon the selected source 4. A V IN Connector: This connector accepts a 3.5 mm jack through which signals from various audio/video devices can be applied to the unit. 5. O pen Button: Press to open/close the TFT/LCD screen. 6.
VX4010 REMOTE CONTROL Remote Control Notes 1. Aim the remote control at the remote sensor on the unit. 2. R emove the battery or insert a battery insulator if the remote control will not be used for a month or longer. 3. D o not store the remote control in direct sunlight or in a high temperature environment. It may not function properly. nder normal operation conditions, battery life is approximately 6 months. If 4. U the remote control does not work, replace the battery. 5.
VX4010 This page intentionally left blank 11
VX4010 32 1 31 2 30 3 29 4 28 5 27 6 26 7 25 8 20 9 24 23 10 22 11 21 12 20 13 19 14 15 16 18 17 VX4010 Remote Control 12
VX4010 Remote Control Functional Description 1. S OURCE (SRC) Button: Press this button to switch between and select available sources. (Radio, Disc, SDHC, USB/iPod®, Bluetooth®, AV-IN, Pandora) 2. POWER Button ( ): Press this button to turn the unit ON and OFF. 3. BLUETOoTH (BT) Button: Press this button to enter the Bluetooth feature. 4. MAP Button: Not used. 5. PLAY / PAUSE ( ) Button: Press this button to pause the playback of a disc. Press this button again to resume normal playback. 6.
VX4010 15. Disconnect ACTIVE PHONE CALL Button ( disconnect an active Bluetooth phone call. ): Press this button to 16. BACKSPACE Button ( ): Press this button to correct invalid number entries when entering passwords, track/chapter selections or phone numbers using the remote control. 17. RANDOM Button ( ): Press this button to play tracks or chapters in random order while playing a disc. 18. repeat Button ( ) : Press this button to repeat the playback of a current track.
VX4010 26.
VX4010 USING THE TFT MONITOR Opening/Closing the TFT Monitor Open the TFT Monitor Press the OPEN button on the front panel to activate the mechanism that moves the display panel into the viewing position. Close the TFT Monitor Press the OPEN button on the front panel to load the display panel back into the compartment. TFT Monitor Tilt Angle Adjustment A known characteristic of TFT panels is that the quality of the display varies in relationship to the viewing angle.
VX4010 EXTERNAL DEVICES Connecting External Devices External devices, including a game console, camcorder, navigation unit, iPod®, Zune®, etc. can be connected to this unit using its front A/V input 3.5mm jack (AV-IN). You cannot directly control external devices connected to the A/V input using the front panel controls or this unit’s remote control. AV-IN AV-IN is used for playback of audio/video from an external device connected to the unit through a 3.5mm jack.
VX4010 QUICK START GUIDE Turning the Unit ON or OFF Press the front panel SRC / Power ( ) button to turn the unit ON. To turn the unit OFF, press and hold the front panel SRC / Power ( ) button for 2 seconds. Selecting an Audio/Video Source, Bluetooth, Steering Wheel Controls, Backup Camera or Pandora To select a source by using the front panel SRC button or main menu screens: 1. Press the SRC button on the front panel to switch playing sources. SRC Button VX4010 Front Panel 2.
VX4010 System Settings Adjustment To access and adjust system settings: 1. Touch the Settings ( ) icon on the Main Menu screen to enter the SETTINGS MENU. Sub-menus where adjustments can be made will be highlighted. (See ”SYSTEM SETTINGS” on page 23.) Volume Adjustment To increase or decrease the volume level, rotate the front panel Rotary ) knob / Mute button. The unit’s front panel screen will display the Volume ( volume level for 3 seconds.
VX4010 Playing a Disc To begin playback of an Audio/Video Disc: 1. P ress the front panel Rotary Volume ( ) knob / Mute button to turn the unit ON. 2. I nsert a disc with the label side facing up. Playback will begin automatically. (See “DISC OPERATION” on page 32.) To eject a disk: 1. Press the front panel Eject ( ) button.
VX4010 EQUALIZER CONTROL MENU Adjusting Equalizer Controls The Equalizer adjustment screen allows the user to easily adjust the audio system to meet the acoustical characteristics of the vehicle. The acoustical characteristics vary depending on the type of vehicle and measurements. For example: proper setting of the audio controls can improve the speakers frequency response to compensate for cabin.
VX4010 Reset Setting Touch the Reset icon to reset the 10 equalizer band frequencies to the mid point. Loud Setting Touch the Loud icon to turn the loud option ON or OFF. The loud option automatically alters the frequency response curve of audio to make it sound more natural when played at a lower volume level. To exit the Equalizer menu touch the SRC icon to return to the current source.
VX4010 SYSTEM SETTINGS To access System Settings, touch the icon on the Main Menu screen. There are seven System Settings Sub-menus (General, Audio, Time, Language, Bluetooth, DVD or Volume) that are used to adjust the performance of each option of the VX4010. The Version Sub-menu is for information only. Touch a desired Sub-Menu and the Sub-menu will appear highlighted. The features available for adjustment will appear on the screen. System Settings Screens Adjusting a Sub-Menu Feature 1.
VX4010 Beep - Touch ON or OFF to turn the selection confirmation beep ON or OFF. Wallpaper - Touch Engine Start, Blue Haze, Green Cubes, Red Swirl or Tribal to select the TFT LCD wallpaper. Touch again to confirm and set the wallpaper. Calibration- The Touch Screen Calibration adjustment is used to set the parameters of the touch screen to ensure that when the screen is touched, it corresponds to the feature desired.
VX4010 Illumination - Touch to access the Illumination screen. Touch a color to set the front panel display to the selected color. UI Color - Touch green, red, amber, blue or purple to select the user interface color. Touch again to confirm and set the color. Demo - Touch ON or OFF to turn the demonstration mode ON or OFF. The factory default setting is ON.
VX4010 Audio Sub-menu Features The Audio Sub-menu is used to turn the Subwoofer output ON or OFF and to select a Subwoofer crossover frequency. Audio Sub-menu Screen Subwoofer - Touch ON or OFF to turn the subwoofer output ON or OFF. Subwoofer Crossover - Touch a crossover frequency (80Hz, 120Hz or 160Hz) to set a cut-off frequency for the subwoofer’s low-pass filter (LPF). Time Sub-menu Features The clock appears in the top right corner of the screen during certain operations.
VX4010 Time - Touch the Time icon and use the p or q icons to set the hour, minute, and either AM or PM. After setting the time, touch Save. The time will appear to the right of the Date option. Date Settings Time Settings Date and Time Setting Screens Language Sub-menu Features If a DVD supports more than one Subtitle or Audio language, all the languages are available for selection during playback. If the selected language is not supported by the DVD, then the default language is used.
VX4010 Bluetooth Sub-menu Features The Bluetooth audio capabilities can be used for wireless phones hands free applications. Before attempting to use the Bluetooth functions on this unit, please make sure the wireless phone to be connected supports Bluetooth functions. Bluetooth Pairing Code Screen 2 Bluetooth - Touch ON or OFF to turn the Bluetooth function ON or OFF. Auto-Connect - Touch ON or OFF to turn the Bluetooth Auto-Connect function ON or OFF.
VX4010 DVD Sub-menu Features The DVD system has a built-in parental lock feature to prevent unauthorized persons from viewing restricted disc content. By default, the rating system is unlocked. Once set up, the parental lock is released only by entering the correct password. Once the password is entered, rating is available for setup. DVD Sub-menu Screen Set Password - This feature allows the user to create a unique 4-digit password to activate or deactivate the “Rating” option. 1.
VX4010 Load Factory - This feature allows the user to “Reset” to restore the factory default settings (Rating system only). To reset the password, access the “RATING” menu and enter the current password. Once the correct password is entered, you can access the “Password” field and enter a new one. NOTE: Record the password and keep it in a safe place for future reference. The rating for each disc is marked on the disc, disc package, or documentation.
VX4010 Bluetooth - Touch the Bluetooth icon to enter the setting of the connected device, then use the p or q icons to increase or decrease the relative volume level between -6 to +6. AV-IN - Touch the AV-IN icon to enter the setting of the connected device then use the p or q icons to increase or decrease the relative volume level between -6 to +6. iPod - Touch the iPod icon to enter the setting then use the p or q icons to increase or decrease the relative volume level between -6 to +6.
VX4010 DISC OPERATION Compatible Audio Discs Types This system will play the following types of discs: • DVD - DVDs that contain audio and/or video. • Audio discs - Audio CDs that contain audio, video and image files. • MP3 discs - A disc that contains audio, video and image files (for example, a CD-R with downloaded MP3 files). NOTE: This unit is designed to play pre-recorded (original) CD/DVDs. Some burned CD / DVDs may not play due to different recording formats and speeds.
VX4010 Title/Chapter Information - The title/chapter information displayed is the current number of the track playing, the total number of tracks on the disc, the current chapter playing and the total number of chapters on the disc. Time Display - This indicator displays the time as entered by the user in the Settings Menu. Chapter Elapsed Playback Time - The elapsed playback time of chapter is displayed on the screen. Total Playback Time - The total playback time of disc is displayed on the screen.
VX4010 ( ) Repeat - Touch this icon during playback to repeat the current chapter. The icon on the screen will light and small letter C will appear below the icon and the chapter will repeat. Touch this icon a second time to repeat the current title. The icon on the TFT LCD screen will light and small letter T will appear below the icon and the title track will repeat. Touch the icon a third time to repeat the title and chapter.
VX4010 Direct Entry When the Direct Entry icon is touched the Direct Entry Screen appears. The user can manually select a title or a chapter. By touching q icon, the user can select a chapter or title. The title or chapter can be selected by touching the corresponding number for a title or chapter. After entering the numbers, touch the OK icon. If a wrong digit is entered, touching the arrow will remove the number. After touching OK, playback will begin.
VX4010 Multi-Language Discs (DVD Only) Changing Audio Language - If you are watching a disc recorded in multiple languages, touch the TFT LCD screen, then touch AUDIO to choose a language. Each time the icon is touched the language will change. Changing Subtitle Language - If you are watching a disc recorded in multiple languages with subtitles, touch the TFT LCD, then touch Language screen to choose the language that you would like the subtitles to appear.
VX4010 General Disc Information Disc Properties Symbol 12cm Disc Properties Max Play Time Single side single layer (DVD-5) Single side double layer (DVD-9) Double side single layer (DVD-10) Double side double layer (DVD-18) (MPEG 2 Method) 133 minutes 242 minutes 266 minutes 484 minutes Single side single layer (VCD) (MPEG 1 Method) 74 minutes Single side single layer 74 minutes Disc Symbols Symbol Meaning Number of voice languages recorded.
VX4010 CD Operation From the Main Menu Screen touch the DISC icon or insert a CD into the disc slot, label side up. Playback begins in CD mode when a disc is inserted correctly. CD Main Menu The on-screen icons and touch key areas are outlined below. CD Main Menu SRC Icon - Touch this icon to return to the Main Menu Screen. DISC - Displays the current source. Track Number- Lists the current track playing and the total number of tracks contained on the disc.
VX4010 List - Touch this icon to access the list of tracks contained on the disc. Touch a desired track icon twice and the track will begin playing. ( ) Shuffle - Touch this icon to play tracks in the directory in a random order. The icon will light on the main CD screen. ) Repeat - Touch this icon to repeat playback of the current track. The icon ( on the TFT LCD screen will light and small number 1 will appear below the icon and the track will repeat.
VX4010 CD List Touching the List icon will display the CD List Screen. The CD List Screen illustrates the contents of a CD disc. The contents are divided into folders and various file types. The file types are audio tracks, Audio Video Interleave (AVI) files, and image files such as JPEGS. AVI files is a format designed to store both audio and video data for simultaneous playback. Touching the icon will display the files present on the disc.
VX4010 Track Direct Entry When the Direct Entry icon is touched the Direct Entry Screen appears. The user can manually select a track by touching the corresponding number. After entering the track numbers touch the OK icon. If a wrong digit is entered touching the arrow will remove the number. After touching OK playback will begin. CD Track Direct Entry Screen Controlling Playback Inserting a Disc - Upon inserting a CD, disc play begins.
VX4010 MP3/WMA Operation MP3 is a format for storing digital audio. An audio CD-quality song can be compressed into the MP3 format with very little loss of quality, while taking up much less space. Insert a MP3 Disc into the disc slot, label side up. Playback begins in MP3 mode when a disc is inserted correctly. The unit plays the songs in the order they were burned on to the disc. The menu for playing audio MP3 music files is the same as previously described for CD discs.
VX4010 Controlling Playback Inserting a Disc- Upon inserting a MP3/WMA disc, disc play begins. You cannot insert a disc if there is already a disc in the unit or if the power is off. Ejecting a Disc - Press the Eject ( ) button on the front of the unit to eject the disc. The unit automatically reverts to Tuner mode. You may eject a disc with the unit powered off. The unit will remain off after the disc is ejected.
VX4010 RADIO TUNER OPERATION From the main menu screen touch the radio icon. The radio tuner display screen appears. Radio Tuner TFT Display The on-screen icons and touch key areas are outlined below. Radio Tuner TFT Display Screen SRC Icon - Touch to view the SOURCE MENU and select a new playback source. Radio - Displays the current source. Time Display - This indicator displays the time as entered by the user in the Settings Menu. Preset List - Provides a display of the preset frequencies.
VX4010 More ( p/q ) - Touch the p/q icons to display the next or previous page of the Disc menu. ) Previous/Manual Seek - Touch this icon to momentarily seek the previous ( available radio station. Touch and hold this icon to manually tune the radio in 200KHz (for FM) or 10kHZ (for AM) increments. Default mode is resumed after 10 seconds of inactivity. ( AS ) Auto Store - Touch to automatically search and store all strong stations.
VX4010 RDS ON/OFF - The Radio Data System (RDS) enables traffic reports to be received and provides many facilities, including enabling the radio station name to be displayed. CT ON/OFF - (Clock Time) When enabled the radio system clock is synchronized with broadcasters time signal setting the clock automatically. In some regions where daylight savings time is not adhered to, the system clock will be off by 1 hour. In these cases, set CT to OFF and manually set the clock.
VX4010 Direct Entry Tuning When the Direct Entry icon is touched the Direct Entry Screen appears. The user can enter the desired radio station frequency using the on-screen number pad. After entering the radio station frequency touch the OK icon. If a wrong digit is entered touching the green arrow will remove the number. After touching OK the radio will tune to the entered station. Playback will begin.
VX4010 3. T ouch the preset number in which you would like to store the current station. The station frequency is displayed at the top of the menu. The preset number will appear highlighted. The station frequency will be stored in the highlighted preset. The station will be displayed Tuner TFT LCD screen. Station can also be stored by touching and holding the preset icon to store the station currently tuned as a preset. Recalling a Station 1. Select a preset band (if needed). 2.
VX4010 USB AND SDHC OPERATION The unit will read the audio/video files on USB devices/microSD cards automatically. NOTE: The USB/SD ports will recognize most USB/SD flash memory devices and portable hard drives. The unit supports up to 32GB SD cards however SD cards larger than 32GB may not be recognized. Portable hard drives (hard drives must be formatted to FAT32 and NTFS is not supported). Inserting/Removing a USB Device or microSD Card To insert a USB device or microSD card: 1.
VX4010 USB and SDHC Operation From the main menu screen touch the USB or SHDC icon. SDHC and USB Main Menu The on-screen icons and touch key areas are outlined below. SDHC and USB Main Menu SRC Icon - Touch this icon to return to the Main Menu Screen. Scrolling Display - Displays current track information. Track Number - Lists the current audio track playing and the total number of audio tracks in audio mode. Lists the current video folder and the total number of video folders in video mode.
VX4010 List - Touch this icon to access the list of audio and video files contained on the USB device/microSD card. Touch a folder icon and the contents of the folder will be displayed. Touch a desired track icon twice and the track will begin playing. ( ) Shuffle - Touch this icon to play audio or video tracks in a random order. The icon will light on the main TFT LCD screen. ( ) Repeat - In audio mode touch this icon to repeat playback of the current audio track.
VX4010 SDHC and USB List Touching the List icon will display the SD/USB List Screen. The SD/USB List Screen illustrates the audio and video files present in the SD/USB device. The contents are divided into folders and various file types. The file types consist of audio and video files. Touching the folder icon will display the files present in the folder. SDHC List Screen USB List Screen SDHC and USB List Screens ( ) Audio Files - Touch the audio file icon to display the audio files.
VX4010 Direct Entry When the Direct Entry icon is touched the Direct Entry Screen appears. The user can manually select a track by touching the corresponding number. After entering the track numbers touch the OK icon. If a wrong digit is entered touching the arrow will remove the number. After touching OK playback will begin. SDHC and USB Track Direct Entry Screen Moving Through Tracks Touch the Next ( ) icon to advance to the next track on the SD/USB device.
VX4010 iPod®/iPhone® OPERATION Accessing iPod® Mode The user can control an iPod®/iPhone® using the touch screen to access, albums, songs, videos, etc. NOTE: For iPod®/iPhone® video playback, use an adapter cable equipped with a USB connector and a 3.5 mm AV jack. For basic connectivity, the iPod®/iPhone® must be connected to the unit using the iPod®/iPhone® adapter cable that came with the iPod/iPhone (also available separately) and a adapter cable to connect to the unit’s mini USB connector.
VX4010 iPod®/iPhone® Main Menu The on-screen icons and touch key areas are outlined below. iPod®/iPhone® Main Menu SRC Icon - Touch this icon to return to the Main Menu Screen. iPod - Displays the current source. Track Number - Lists the current audio track playing and the total number of audio tracks in audio mode. Lists the current video folder and the total number of video folders in video mode. Time Display - This indicator displays the time as entered by the user in the Settings Menu.
VX4010 ( ) Repeat - In audio mode touch this icon to repeat playback of the current audio track. The icon on the main TFT LCD screen will light and a small letter A will appear below the icon and the all the audio tracks will repeat. Touch this icon again and single track will repeat. The icon on the TFT LCD screen will light and small number 1 will appear below the icon. Touch the icon again the repeat function will be cancelled.
VX4010 ( ) Folders - Touch the icon to display the folder/file hierarchy. Touch the folder icon and the contents of the folder will be displayed. Touch the file’s icon to select a file. Touch the icon again to confirm and open the file. Controlling Playback Direct Entry When the Direct Entry icon is touched the Direct Entry Screen appears. The user can manually select a track by touching the corresponding number. After entering the track numbers touch the OK icon.
VX4010 Pausing Playback Touch the Play/Pause ( ) icon to suspend or resume playback. PIC - When the PIC icon is touched the picture adjust screen appears. Touch this icon during playback to adjust the color brightness, contrast, saturation and hue. The levels can be adjusted to suit the users preferences. The adjustments are accomplished by touching the + or - icons to decrease or increase the desired setting. The settings have range of 1 to 20.
VX4010 AV-IN OPERATION AV-IN is used for playback of audio/video from an external device connected to the unit through a 3.5mm jack located on the font panel. The unit can increase or decrease the volume of the connected device. All other controls are done on the connected device. AV-IN Screen (No Signal) NOTE: Audio/Video device must be connected to the unit using an audio/video adapter cable that is available separately.
VX4010 BLUETOOTH OPERATION Bluetooth® was launched by a special interest group (SIG) comprised of Ericsson Inc., Intel Corp., Nokia Corp., Toshiba and IBM in 1998, and it is currently developed by nearly 2,000 companies worldwide. The Bluetooth® word mark and logos are owned by the Bluetooth® SIG, Inc. and any use of such marks by Audiovox Corporation is under license. Other trademarks and trade names are those of their respective owners.
VX4010 Bluetooth User Interface The on-screen icons and information for Bluetooth® functions are outlined below. Bluetooth User Interface Screen SRC Icon - Touch this icon to return to the Main Menu Screen. luetooth - Displays the current source. B L GVX9200 - Indicates the device that is paired with the unit. ( ) - Indicates whether the unit is connected with a Bluetooth®device. Touch to connect to a Bluetooth® device. ( ) - Touch to disconnect from a Bluetooth® device.
VX4010 Hands Free Profile (HFP) To use a mobile phone with this unit, it is necessary to first establish a connection using Bluetooth® wireless technology. The connection is normally established using Hands Free Profile (HFP), which gives you full control of functions available on the mobile phone source. However, depending on your mobile phone, the connection may be made using Head Set Profile (HSP), making some functions unavailable. This is a limitation of your mobile phone, not the VX4010.
VX4010 8. T ouch the “Pair” icon on the unit’s Bluetooth® user interface screen. 9. A prompt to pair or bond should appear on your mobile phone. Accept the request and initiate the process. NOTE: Some mobile phones require a “pass key” or pairing code to connect. If your phone requires a pass key or pairing code, you will need to enter this number. The default pairing code for many mobile phones is “0000”. The default code for the unit is “0000”. 10.
VX4010 Making an Outgoing Call Outgoing calls can be performed in two manners. The outgoing call can be direct dialed using the front panel keypad or the by touching either the Phonebook or Call History icons, selecting a name and touching the phone number. Direct Dialing: 1. P ress the front panel MENU button and then touch the BLUETOOTH icon to access the Bluetooth® main menu. The following screen will appear: Bluetooth Direct Dial Screen 2.
VX4010 Audio Mute To mute the phone call audio from the unit when a call is received, press the front panel rotary knob. Press the front panel rotary knob again and phone call audio will be restored to the unit. Call Log The call log consists of dialed numbers, received calls and missed calls. NOTE: Not all wireless phones allow access to missed, received or dialed calls and some will not allow uploading of your wireless phone’s address book.
VX4010 Call Transfer While talking, to transfer audio from the unit back to the mobile phone, touch the Transfer to Phone icon. You can only transfer a call after it has been answered. Touching the Transfer to Radio icon will return the audio from the mobile phone to the unit.
VX4010 While listening to audio the following functions are available: 1. P ause/Play ( ) icon: Touch to pause playback. Touch again to resume playback. 2. Previous ( ) icon: Touch to play the previous track. 3. Next ( ) icon: Touch to play the next track. Functionality varies depending on the profile used: • A2DP: Stream audio from your Bluetooth® compatible audio player and listen to the music through the unit. • AVRCP: Play back, pause, select songs, etc.
VX4010 REAR CAMERA OPERATION This unit is “camera ready.” Before accessing any camera features, you must install a rear video camera. When the camera is not installed and the function is accessed by the gear selector being placed in reverse or by the unit’s menu, the message “No Signal!” will be displayed and the following screen will appear. Rear Camera Screen When the camera is installed, the rear view image of what is behind the vehicle will appear when the vehicle is placed in reverse gear.
VX4010 STEERING WHEEL CONTROLS (SWC) OPERATION The built-in SWC Interface is compatible with most vehicles equipped with “resistive type” original equipment (OE) steering wheels. Note: Not all OE steering wheel functions may be supported by the VX4010. The following controls are available for most vehicles: 1. Volume Up (+) 4. Seek Up (Next) 7. Preset (+) 10. BT Send 2. Volume Down (-) 5. Seek Down (Prev) 8. Preset (-) 11. BT End 3. Mute 6. Source 9. Band 12.
VX4010 SWC Programing Up to 16 steering wheel control functions can be programmed via the built-in SWC interface. Not all functions may be supported for each vehicle. 1. P opular OE steering wheel functions are already pre-programmed from the factory. If your vehicle does not support the exact same functions already preprogrammed, you will need to clear / reset the SWC interface and program in the exact functions of your vehicle. To clear / reset the SWC interface, press and hold “Reset” for 2 seconds.
VX4010 PANDORA RADIO OPERATION Pandora Radio is available via your iPhone® (data usage will occur), iPod® touch (via Wi-Fi) or Android™ device (via Bluetooth®). NOTE: The Pandora app must be installed on your iPhone®/iPod® touch or Android device. NOTE: For basic iPod®/ iPhone® connectivity, you can use the white 30-pin to USB iPod cable that came with your Apple device.
VX4010 ( ) Pause / Play Icon - Touch the icon to pause playback. Touch the begin playback. ( icon to ) Next Icon - Press this icon skip a song, subject to the skip limit. ( ) Thumbs Up - Press thumbs up to tell Pandora you like the track currently playing, and Pandora will play more tracks like it. ) Thumbs Down - Press thumbs down to tell Pandora not to play this track. ( Pandora will skip to the next track.
VX4010 Station List Screen The Station List Screen allows you to search for music by stations you created. Pandora Radio Station List Screen Touch a station on the list to choose that station. Touch the Scroll Down (q) icon to view the next page in the list or the Scroll Up (p) icon to view the previous page. Touch the Return to Now Playing icon to return to the Pandora Radio user interface screen. To Launch/Stop Pandora Radio 1. Launch the Pandora app on the iPhone®, iPod® or Android device. 2.
VX4010 3. I f both an Android device and iPhone®/ iPod® are connected to the radio, the Select Android or iOS Screen appears. Select Android or iOS Screen 4. To stop Pandora, exit the Pandora app on the iPhone®, iPod® or Android device. Pandora Error Messages Message Displayed Cause Corrective Action BookMark Track Error Software Error The track could not be bookmarked, please try again in a moment.
VX4010 TROUBLESHOOTING Troubleshooting Problem Cause Corrective Action Radio Fuse open Install new fuse with correct rating Car battery fuse open Install new fuse with correct rating Illegal operation Press the RESET button located in the middle of the left side of the front panel Improper audio output connection Check wiring and correct Volume set too low Increase volume level Improper “MUTE” connection Review wiring diagram and check “MUTE” connection Speakers damaged Replace speakers H
VX4010 Problem Cause Corrective Action Incorrect connection to parking brake wire Check wiring and correct Parking brake is not engage Stop vehicle in safe place and apply parking brake DVD is not compatible with current TV system settings Change setup to accommodate disc Improper video signal connections Check wiring and correct Improper aspect ratio setup Use correct aspect ratio setting Auto antenna is not fully extended Extend antenna fully or connect the auto antenna control cable properl
VX4010 Problem Cause Corrective Action Disc does not play back Disc is warped or scratched Use disc in good condition Disc is dirty or wet Laser pickup is dirty Clean disc with soft cloth Clean laser pickup with cleaning disc Incompatible disc is used Use compatible disc Disc rating exceeds Parental Lock rating limit Change Parental Lock settings to lower restriction Disc region code is not compatible with unit Use disc with proper region code Disc is inserted upside down Insert disc with lab
VX4010 Disc Error Messages Message Displayed Cause Loading Disc is being read No Disc Disc is dirty Clean disc with soft cloth Disc is upside down Insert disc with label side up Disc not present in loading compartment Insert disc Disc is dirty Clean disc with soft cloth Disc is upside down Insert disc with label side up Bad Disc Unknown disc Disc format is not compatible with this unit Region Error DVD is not compatible with region code of unit Error Illegal mechanism operation 78 Cor
VX4010 CARE AND MAINTENANCE 1. U se only a clean silicone cloth and neutral detergent to clean the front panel or monitor. A rough cloth and non-neutral detergent (such as alcohol) may result in scratching or discoloration. 2. Do not get water or cleaning fluids on the unit. 3. I f the temperature inside the player gets too hot, a protective circuit automatically stops play of the disc. If this occurs, allow the unit to cool before operating the player again.
VX4010 SPECIFICATIONS DVD/CD Player Compatible Disc Media: DVD + R / RW (Single and Dual Layer) and CD-R / RW Compatible Media Formats: CD-DA, MP3, WMA, VCD, SVCD, Xvid, AVI, MPEG 1/2 Signal to Noise Ratio: >95dBA Dynamic Range: >95dB Frequency Response: 20Hz to 20 kHz, -3dB Channel Separation: > 60dB @ 1 kHz D/A Converter: High performance 24-bit / 192 kHz sample rate, Multi-Bit SigmaDelta Modulator Video Format: NTSC, PAL (auto-detection) Output: 1Vp-p (75-ohm) Input: 1Vp-p (75-ohm) FM Tuner Tuning Rang
VX4010 General Auxiliary Input impedance: 10k Power Supply: 11 to 16VDC, negative ground Power Antenna (Blue): 500mA max, current limited protection Amplifier Remote (Blue/White): 500mA max, current limited protection Operating Temperature: -20C ~ 65C Fuse: 15-amp, mini ATM type DIN chassis dimensions: 7” X 7” X 2” (178mm x 178mm x 50mm) CEA Power Ratings Power Output: 13 Watts RMS x 4 channels into 4-Ohms @ < 1% THD+N Signal to Noise Ratio: 70dBA below reference (Reference: 1 Watt, 4-Ohms) Frequency Respo
VX4010 NOTES 82
VX4010 83
VX4010 VX4010 Common Replacement Parts Owner’s Manual, Install Manual, and Warranty Card 30613960 Wire Harness (Pwr/Spk/Line Out/ BT Mic / SWC Adapter) 30313960 Trim Ring 30413940 Remote Control 30713940 Hardware Bag 30513940 Mounting Sleeve & Removal Keys 30113940 Mounting Strap 33013940 Voxx Electronics Corporation Hauppauge, NY 11788 Technical Assistance: 1-800-323-4815 www.jensenmobile.