Installation Manual

VX7012/VX4012
What’s in the Box
The following items are supplied
with the VX7012/VX4012:
• HeadUnit
• TrimRing
• HardwareBag
• Power/SpeakerOutputHarness
• RemoteControl
• ExternalMicrophone
• MountingSleeve& RemovalKeys
• InstallationGuide
Tools and Supplies
The following tools and supplies are needed to
install the head unit:
• Torx type, flat-head and Philips
screwdrivers
• Wire cutters and strippers
• Tools to remove existing r
adio (screw
driver, socket wrench set or other
tools)
• Electrical tape
• Crimping tool
• Volt meter/test light
• Crimp connections
• 18 gauge wire for power connections
• 16 – 18 gauge speaker wire
WARNING!Neverinstallthisunitwhereoperationandviewingcouldinterferewith
safedrivingconditions.
INSTALLATION GUIDE
• GPS Antenna (VX7012 Only)