Owner's Manual

50
VX6020
USB AND SD CARD CONTROLS
Inserting a USB or SD Card Device
USB Device
When using a USB memory device, a USB cable adapter is required. The adapter
cable will accept a USB device on one end and connect to unit’s Mini USB connector
on the front panel of the unit.
NOTE: For iPod®/iPhone® video playback, use an adapter cable equipped with a
USB connector and a 3.5 mm AV jack. For basic connectivity, the iPod®/iPhone®
must be connected to the unit using the iPod®/iPhone® adapter cable that came
with the iPod/iPhone (also available separately) and a adapter cable to connect
to the unit’s mini USB connector. Be sure your iPod®/iPhone® has the latest Apple
rmware installed to avoid connectivity issues The USB/SD ports will recognize most
USB/SD ash memory devices and portable hard drives. The unit supports up to
32GB SD cards however SD cards larger than 32GB may not be recognized. Portable
hard drives (hard drives must be formatted to FAT32 and NTFS is not supported).
SD Device
SD cards are inserted into the SD card slot until a click is heard. The click will ensure
that the card is securely inserted to the unit. The unit will read the audio/video les
on USB/SD devices automatically.
1. Locate the USB/SD connector on the front of the radio.
2. Lift the protective cover to reveal the mini USB connector and SD card slot.
3. Insert the USB/SD device into the mini USB/SD connectors.
To remove the USB or SD device, touch the SRC icon or use the SOURCE MENU to
switch to another mode, and then remove the USB or SD device from the connector.
OPEN
AV- IN
OPEN
AV- IN
VX6020
SD CARD
AV INPUT
Bluetooth
Figure 39. USB and SD Connector Location
Figure 38. Mini USB to USB Adapter Cable