Owner's Manual

Locking the Vehicle

To lock the vehicle, exit the vehicle, close all doors, then press the button. The

parking lights will flash 2 times, indicating the system has locked the doors and

activated the starter interrupt feature (if equipped and connected). The LED

status indicator will blink steadily, once per second.

NOTE: The system is equipped with a feature called Silent Choice. If enabled, the

system requires a second press of the button to activate an audible locking

response from the vehicle.

Using Your Remote Control

Two Stage Door Unlock (Optional)

If this feature is enabled on your system, pressing the button one time will

unlock only the driver’s door. Press again within three seconds to unlock the

remaining doors.

Eliminating Lock / Unlock Notification Chirps

System lock and unlock notification chirps can be toggled ON or OFF without

entering the programming feature banks.

1. Turn the ignition ON then OFF.

2. Press and release the valet/programming button 3 times. The system

will respond with 1 chirp for ON or 2 chirps for OFF.

Valet Mode

When valet mode is activated the status LED will light solid, and the optional

starter interrupt feature will be disabled. To enter or exit valet mode simply follow

the 4 steps outlined below:

1. Turn the vehicle’s ignition ON.

2. Push and hold the programming/valet button.

3. The LED will turn on solid when valet mode is active

4. Release the programming/valet button.

Unlocking the Vehicle

To unlock the vehicle press the button. The parking lights will flash 1 time,

indicating the system has unlocked the doors and disabled the starter interrupt

feature (if equipped and connected).

NOTE: The system is equipped with a feature called Silent Choice. If enabled, the

system requires a second press of the button to activate an audible unlocking

response from the vehicle. If your system is set up for 2 step unlock, a third

press of unlock will activate the audible response.