WFM7810 DC Power Adapter With Built-in Four Frequency Wireless FM Modulator Owner’s Manual
Connections and Controls Diagram Frequency Select This DC Power adapter has a built-in wireless four frequency FM Modulator. The FM modulator is designed to accept line level audio signals only. The frequency select switch is used to select from four available transmitter frequencies. The radio must be tuned to the same frequency that is selected on the frequency select switch. To achieve the best results, select a radio frequency that is not used in your area from the available frequencies.
FCC RF EXPOSURE COMPLIANCE: This transmitter meets the government’s requirements for exposure to radio waves. This low power transmitter complies with the Federal Communications Commission (FCC) RF exposure limits for general population/Uncontrolled exposure environment. FCC Notice: This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions. (1) This device may not cause harmful interference.
