WIDTV1 Mobile TV Receiver WIRELESS LIVE LOCAL TV ON THE GO Quick Start Guide 128-9242a WIDTV1 MobileTV Quick Start Guide 11 25 2013.
To access the English language WIDTV1 Mobile TV Receiver User Manual, please visit www.audiovoxmobiletv.com. To access the Spanish or French language WIDTV1 Mobile TV Receiver Quick Start Guide or User Manual, please visit www.audiovoxmobiletv.com. NOTE: The Audiovox MobileTV product will only work in areas where there is coverage of ATSC-MH broadcast signals. Before operating the device, please check for up-to-date information on what stations may be available in your area by visiting: www.dyle.
“Changes or modifications not expressly approved by the part responsible for compliance could void the user's authority to operate the equipment.” FCC Statements: “This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
Introduction Introduction Thank you for purchasing the Audiovox WIDTV1 Mobile TV Receiver. The WIDTV1 is an efficient, user-friendly accessory for viewing live free-to-air TV content on compatible Android® and Apple® devices, and is compatible with ATSC-M/H digital TV transmissions. The WIDTV1 creates its own private WiFi network for use by the mobile device and there is no need to search for an internet connection or use cellular data airtime.
1. 2. 3. 4. WIDTV1 Mobile TV Receiver Telescopic Antenna Micro USB Cable Quick Start Guide Package Contents Package Contents 3 1 4 2 2 128-9242a WIDTV1 MobileTV Quick Start Guide 11 25 2013.
System Requirements System Requirements Supports the following Apple® devices: iPad2®, New iPad®, iPad Mini®, iPhone 4S®, iPhone 5®, and iPod 5® with iOS 5.1.X or newer. Designed for use with advanced Android® devices using Android® 4.0.3 or newer, such as Samsung® Galaxy S2/S3, Note/Note2, Google® Nexus 7, Asus®TF300, HTC® One and others (WIDTV1 Mobile TV Receiver was tested with a select list of manufacturers and models only).
1. Charge the WIDTV1 Mobile TV Receiver fully before initial operation. • • • Plug the supplied USB charging cable into a USB port. Insert the Micro USB charging cable connector into the WIDTV1 Mobile TV Receiver and the red “Charge” LED will illuminate. When the WIDTV1 Mobile TV Receiver is fully charged, the red “Charge” LED will turn OFF. 2. Download and install the free Audiovox mobiletv with DyleTM TV app from the App Store or Google Play®. Installation Instructions Installation Instructions 3.
Installation Instructions Installation Instructions (continued) 6. Place the WIDTV1 Mobile TV Receiver in a suitable location close to a window where it will not be subjected to moisture or excessive heat. 7. Set up the WiFi connectivity on your mobile device’s settings/connectivity manager. • • Use your mobile device at a maximum of 7 meters distance from the WIDTV1 Mobile TV Receiver Go to the Network Manager on your mobile phone or tablet and search for the “Audiovox MobileTV xxxxxx” network.
. Scan for channels. a. Channels must be scanned in order to watch live TV, go to; Settings > Scan Channels > Scan NOTE: T he Channel Scan progress bar will be displayed and the process may take several minutes to complete. b. When channels are found, the number of channels will be displayed. If channels are not found, re-perform the channel scan process. c. Installation Instructions Installation Instructions (continued) Once the channel scan is complete, press DONE. 10.
Troubleshooting Troubleshooting Cannot connect to WIDTV1’s WiFi • Turn OFF the WIDTV1 Mobile TV Receiver and then turn it ON again. • Go to the network manager in your phone or tablet and search for the “Audiovox MobileTV xxxxxx” network. • Make sure that the mobile device is not in flight/airplane mode. Poor Image Quality • Try to improve the antenna location (near a window if possible). • Scan for available stations with strong signals again. Application is stuck or is not working • a.
Application does not recognize the device • Close the application, turn the WIDTV1 Mobile TV Receiver OFF and back ON, reconnect to the WiFi and open the application again While using WIDTV1 Mobile TV Receiver, TV reception suddenly stops • Make sure that the blue LED is ON • If it is not on, this means that the battery is either empty or has only 10 more minutes of operation; charge the battery until the red charging LED turns OFF. Troubleshooting Troubleshooting NOTES: a.
www.audiovoxproducts.com © 2013 AUDIOVOX,150 Marcus Blvd. Hauppauge, NY 11788 128-9242a 128-9242a WIDTV1 MobileTV Quick Start Guide 11 25 2013.
