MODEL XM50 OWNER’S MANUAL AM/FM RADIO WITH XM RADIO AND iPod CAPABILITY Model XM50 Owner’s Manual VERSION V 1.
MODEL XM50 OWNER’S MANUAL 1.0 Function of Controls and Indicators 16 17 18 15 19 14 20 7 6 5 4 8 3 9 2 1 SNOOZE/MUTE 13 10 1 12 2 MODE VO L DISP VO L DIRECT 3 SELECT SETUP C AT CH CH C AT 11 4 10 5 9 6 7 8 1 Power On/Off Button 11. VOL (Up) Button 2 DISP (Display) Button 12. MODE Button 3 DIRECT Button 13. Infrared (IR) Receiver Window 4 SETUP Button 14. LCD Display 5 CAT (Down) / iPod Fast Reverse Button 15.
MODEL XM50 OWNER’S MANUAL 2.0 Unit Description 2.1 Power On/Off Button ( ) When this button is pressed, power is applied to the radio circuits from the standby mode, and the unit enters into the play mode (XM/FM/AM/AUX/iPod). When pressed again during any play mode, power is removed from the radio circuits and the unit reverts to the standby mode. The default play mode is XM. Press this button to enter into play mode from standby mode Press this button to return to standby mode from any 2.
MODEL XM50 OWNER’S MANUAL 2.3.1 FM/AM Radio Ranges In DIRECT mode, the FM radio band ranges from 87.5 to 107.9MHz, while the AM band ranges from 530 to 1710kHz. 2.3.2 Changing FM/AM Radio Frequencies FM and AM radio frequencies can be changed by using the CH Up/Down buttons; each button press changes the frequency in 100kHz steps. Pressing the CAT Up or Down button enters the frequency search mode.
MODEL XM50 OWNER’S MANUAL 2.4 SETUP Button When MENU is pressed, a list of menu items appears on the display. Select the desired item using the Channel Up ( CH ) and Channel Down ( CH ) buttons to highlight the item; then press the SELECT button to enable adjustment of the selected parameter. Setup Item: -SOFTWARE VERSION FACTORY DEFAULT LCD SETTING AUDIO SETTING XM SETTING CLOCK SETTING 2.4.
MODEL XM50 OWNER’S MANUAL During any play Press CH+/- to mode, press the highlight this item; setup button; then then press select. press CH+/- to Adjust contrast highlight this item range using CH+/- and press select 2.4.4 AUDIO SETTING: When selected, this item enables adjustment of the BASS and TREBLE parameters, each within a range of -5 to +5, and also enables activation of SURROUND sound (ON/OFF). Then press select.
MODEL XM50 OWNER’S MANUAL 2.4.6 CLOCK SETTING: When selected, this item sets the current time in either the 12 or 24 hour system. During any play mode, press the Then press select setup button; then press CH+/- to highlight this item 2.5 CAT/CAT Buttons In AM and FM modes, these buttons enable up/down radio station auto-search. In XM mode, the category buttons enable category search by skipping genres to access a desired category with its associated menu. 2.
MODEL XM50 2.8 VOL/VOL OWNER’S MANUAL Buttons These buttons are used to adjust the speaker volume in the XM/FM/AM/AUX/iPod modes within the range of 0~30. The factory default is at mid-range (15). Press these buttons to adjust the output volume in any mode 2.9 MODE Button This button enables selection of one of five play modes in a sequential wrap-around format (XM/FM/AM/AUX/iPod).
MODEL XM50 Press this button in any play OWNER’S MANUAL Highlight the desired sleep time, then press select mode 2.14 Number Buttons 1-10 These buttons are used to directly input radio station frequency/channel number in XM, FM and AM modes. They are also used to store a desired frequency in memory when the station preset function is active. 2.15 ALARM1/ALARM2 Buttons These buttons set the alarm function.
MODEL XM50 OWNER’S MANUAL 3.0 iPod Docking Station This station provides docking accommodations for an external iPod. When properly installed, iPod operation can be controlled using its associated remote control unit. 3.1 Using the iPod Dock 1. Swing up the protective cover door to access the iPod/XM receiver system connector bay. 2. Choose the compatible adapter/holder for your iPod model and install it in the bay. Note: The XM50 comes equipped with an iPod adapter.
MODEL XM50 OWNER’S MANUAL 4.0 XM Docking Station This station provides docking accommodations for an external mini XM receiver. (Refer to the figure on the previous page.) 4.1 Using the XM Docking Station 1. Swing up the protective cover door to access the iPod/XM receiver system connector bay. 2. Install the mini receiver carefully onto the receiver connector and press down lightly until the receiver bottoms into the recess. Note: 3.
MODEL XM50 OWNER’S MANUAL Press DIRECT to access Press and hold DIRECT memory bank A; enter to access preset channel channel number using list in memory bank A the number buttons 5.0 5.1 Connector Functions Beeper Connector This connector provides for beeper alarm output. 5.2 DC IN Jack This jack connects to the 15 V DC output of the AC/DC adapter supplied with the radio. 5.3 AUX IN Jack This 3.5mm stereo headphone type jack accepts an external audio input from an MP3 player, CD player, etc.
MODEL XM50 5.6 OWNER’S MANUAL AM Antenna Connector This jack provides input 3.5mm connection for a stereo headphone type AM antenna 5.7 FM Antenna Jack This connector provides input for a 75Ω F-connector type FM antenna. 5.8 Port Tube This port on the bottom of the unit provides a heat exhaust for the speaker. 6.0 Remote Control The remote control provides remote commands for both the radio and for an iPod, when installed in the iPod connector bay.
MODEL XM50 OWNER’S MANUAL 1. POWER Button: Same function as radio power on-off. 2. SLEEP Button: Same function as radio; sets sleep time. 3. ALARM Button: Same function as radio; sets alarm time. 4. MUTE Button: Same function as radio; sets audio mute on-off. 5. MODE Button: Same function as radio; switches play mode (XM/FM/AM/AUX/iPod). 6. SETUP Button: Same function as MENU on radio; displays menu items for parameter setup. 7.
MODEL XM50 OWNER’S MANUAL mode items for adjustment. Also used to control selection of iPod menu items. 15. SHUFFLE Button: Press this button to play iPod songs in a completely random manner. 16. REPEAT Button: When pressed once, current iPod song is repeated; when pressed a second time, current song is played continuously. 17. Fast Reverse ( 18. Play/Pause ( ) Button: Press this button to fast reverse through current playing song. ) Button: This button controls the play and pause functions of the iPod.
MODEL XM50 OWNER’S MANUAL 7.0 Initial Use* and Batter y Replacement *When purchased the remote control has a battery installed with a plastic insert to prevent battery discharge. Remove the plastic insert before attempting to use the remote. 1. Remove the battery holder. Refer to the drawing. 2. Insert the battery into the battery holder and insert the battery holder into the remote. Be sure to observe the correct polarity 3.
MODEL XM50 OWNER’S MANUAL NOTES VERSION V 1.
MODEL XM50 OWNER’S MANUAL NOTES VERSION V 1.
MODEL XM50 OWNER’S MANUAL NOTES VERSION V 1.
MODEL XM50 OWNER’S MANUAL © 2008 Audiovox Electronics Corporation, 150 Marcus Blvd., Hauppauge, NY 11788 128-8282 VERSION V 1.
