Owner`s manual

MODEL XM50 OWNER’S MANUAL
VERSION V 1.0 Page 11 of 20
4.0 XM Docking Station
This station provides docking accommodations for an external mini XM receiver. (Refer to the figure on the previous
page.)
4.1 Using the XM Docking Station
1. Swing up the protective cover door to access the iPod/XM receiver system connector bay.
2. Install the mini receiver carefully onto the receiver connector and press down lightly until the receiver bottoms into the
recess.
Note: The receiver can be inserted in one way only; the XM logo should face toward the front of the unit.
3. Press the MODE button until XM is highlighted; observe the following display screens:
If a receiver fault occurs or
if the receiver is
improperly installed, the
following message screen
If an XM antenna
fault occurs, the
following message
screens may appear:
Use the number (1-10) buttons
to directly select a channel
Select the Category using the
CAT+/- buttons; select channel
within the category using the
CH+/- buttons