User's Guide

14
When in the list or menu mode, turning the knob CW and CCW scrolls
UP and DOWN through the various menus and lists. The current
selection from the list will be highlighted on the display. When the item
is highlighted, press the Rotary/Select Knob to enter the selection.
Power Button - This button applies power to and removes power from
the Xpress XM receiver. This button is also the Xpress XM receiver’s
receiver eye (IR).
Memory Button (mem.) - This button allows the user to capture and
store the current program data information (Artist & Song Title). You
can store up to 20 Artist/Song Title combinations.
Jump Button – This button allows the user to jump to the previous
channel (i.e., switch between the current and previous channel).
Preset/Direct Button (pre./dir.) - Each momentary press of the
PRESET button allows the user to switch between three (3) banks of
Channel presets (10 presets in each A, B, and C bank) plus Direct
channel entry. When in any of the three preset banks, momentarily
pressing any of the number buttons will recall the stored channel. In the
Direct mode, use the number buttons to directly enter the desired
channel number followed by pressing the Rotary/ Select Knob.
Keypad Buttons 0-9 - These buttons are used to directly enter a
desired channel number. They are also used when entering and
recalling preset channel numbers that have been stored.
Getting Started